Study of hybrid polystyrene materials with incorporated fullerene nanoparticles
Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.
Подобные документы
Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016A method of determining the effective longitudinal elastic modulus for the composite material in the problem of longitudinal tensile composite. Unidirectional composite material with a hexagonal arrangement of fibers. The effective elastic modulus.
статья, добавлен 27.09.2016Biodegradable poly-3-hydroxybutyrate [P(3HB)] and birch sawdust - a material for the preparation of powder mixtures for molds in the production of granules and tablets. The prospect of a composite obtained on this basis for the building industry.
статья, добавлен 17.04.2022Review of works on the creation and study of environmentally friendly nanostructured polymer composites. Technology of production and application of nanocellulose. Development of new environmentally friendly hydrophobic polymer composites, their scope.
статья, добавлен 29.07.2017The conductive nanocomposite films based on functional reactive copolymers and bifunctional alcohols. Creation multiwall carbon nanotubes. Dependence properties of the nanocomposites from the specific composite composition and obtaining conditions.
статья, добавлен 30.07.2016Extraction of lithium using highly selective inorganic ion exchangers. Composite matrix-isolated flocculants-coagulants. Matrix isolation method is one of the directions of nanotechnology. The technology of application functional nanocomposite materials.
статья, добавлен 31.10.2017Nanocomposites comprising ray in a polymer. The reflection mechanical properties material. Increasing the polymer properties by forming the interphase. Obtaining curves of stress-strain states of macroscopic samples irradiated polymer materials.
статья, добавлен 30.07.2016Search for ways to reduce emissions of pollutants. Biomass as a composite material. Laboratory installation for glucose fermentation to ethanol. Study the concentration of xylose as a function of time. Process flow diagram of the synthesis of bioethanol.
статья, добавлен 23.06.2018The conductive nanocomposite films on the basis of reactionary copolymers received. The threshold of their percolation is determined. It was shown that its value depends on the size of specific surface of nanotubes and conditions of composite obtaining.
статья, добавлен 23.09.2016Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).
статья, добавлен 07.09.2022Application and classification of construction materials. Definition of key indicators affecting the choice of material. Alloys based on copper and aluminum. Properties, applications and benefits of innovative materials, thermosetting plastics, ceramics.
статья, добавлен 10.03.2019Influence of the type of machining and tool material on the structural state of the surface layer of steel during machining. Advantages of turning with composite 10 incisors compared to grinding. The occurrence of tensile stresses during metal processing.
статья, добавлен 14.09.2016Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016The model of spatially distributed curing process of epoxy matrix polymeric composite. The model using the projections of Pareto points set on the 8-dimensional space of design variables. Сontrol synthesis for the closed mould curing of composite spar.
статья, добавлен 30.05.2017This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
статья, добавлен 30.07.2016These developments are devoted to the use of sol-gel processes in various branches of science and technology. Based on inorganic ion-exchange materials, a technology was developed to extract lithium from natural brines, which are poor in lithium content.
статья, добавлен 31.10.2017Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.
статья, добавлен 02.06.2014Grinding of loose materials in order to increase the contact surface, improving rheological activity for the intensification of a number of chemical and physical. Select the most efficient and economically viable method of grinding a hard material.
статья, добавлен 14.03.2019Solution of the problem of the theory of elasticity for a composite in the form of a half-space with a thick-walled round cylindrical tube and a layer rigidly attached to the surface of the half-space. Assessment of the stress state of the composite.
статья, добавлен 26.02.2021The technology of polystyrene plastics. The application methods for industrial liquid coatings and finishes. The spraying, brushing, printing, and silk screening. The application methods for powder coatings and finishes. The electrostatic spray outfits.
статья, добавлен 10.03.2019А technology for manufacturing composite materials - flocculants-coagulants on aluminum-silicon and iron-silicon base. The evaluation of the effectiveness of the developed flocculants-coagulants for cleaning of natural water and industrial wastewater.
статья, добавлен 11.01.2018The developing of the numerical model of viscoelastic material using finite element method. The comparison of the obtained results with use of FEM software with experimental data. The calculation of the stress and strain state of the asphalt specimen.
статья, добавлен 29.09.2016- 25. Strength characteristics of a composite laminate with a center hole under biaxial tensile loading
The developing of a useful model dealing directly with biaxial loading of composite plates with stress concentrations, which can be called progressive damage model. Progressive damage model was utilized to analyze the damage evolution of specimen.
статья, добавлен 18.01.2021