Level of development of new technologies in the BSR countries
Classification level of development of new technologies in the BSR countries using a synthetic development measure. Grouping with the help of cluster analysis. Identify the most important features that determine their development and use as a roadmap.
Подобные документы
Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.
презентация, добавлен 20.10.2014Consideration and characteristics of the scheme double-point wheel-rail interaction. Familiarization with the erosive wearing. Definition of the dependence of the coefficient of adhesion on the temperature. Analysis of sand system of the locomotive.
статья, добавлен 26.09.2016The comparative analysis of the microstructure, phase and chemical composition of the experimental alloys of the Fe-W type with the standardized grade ferrotungsten. The feasibility of using Fe-W for the manufacture high tungsten materials based on iron.
статья, добавлен 30.01.2016Familiarity with the basic method of identification of defects of the drive with induction motor using wavelet transform for the test signals. Analysis of a neural network model converted to the next subsequent stages on the basis of the algorithm.
статья, добавлен 28.08.2016Structure of engineering systems. A description of the statistical procedures recommended for use in reliability analysis "related" components. The choice of an appropriate probabilistic model for predicting the reliability of components of one's sibling.
статья, добавлен 14.09.2016Strength is assumed - index for materials which can take standard, calculated values. Significant dependence between bending resistance, absolute size of structural elements. The structure of the wood fibers - factor which determine timber quality.
статья, добавлен 25.12.2016The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016- 108. Polyphenol composition and technological characteristics of the coloured whey from various origin
The purpose of this scientific work was to determine the polyphenolic composition and technological characteristics of colored whey of various origins, obtained by coagulation of milk proteins with traditional berry raw materials and wild herbs.
статья, добавлен 10.06.2022 Establishing conditions for quality surface finish in grinding abrasive wheel. Determine the optimal mode grinding, allowing you to get the highest performance and lowest cost processing, providing the necessary tech-tech requirements for machine parts.
статья, добавлен 14.09.2016- 110. Global Research on Artificial Intelligence from 1990–2014: Spatially-Explicit Bibliometric Analysis
The evaluation of artificial intelligence research from 1990–2014 by using bibliometric analysis. Growth trend of articles in artificial intelligence from. Temporal pattern of frequently used keywords. International Productivity and Collaboration.
статья, добавлен 02.02.2017 Results Global Capstone Design Workshop in order to find eco-friendly, energy-saving methods in our daily lives and to develop and improve them. In particular, selecting topics based on practical methods for Global Capstone Design will be the main focus.
статья, добавлен 20.09.2021The roller of the belt as the most important parts of the conveyor, being subjected to continuous stress both during operation and in stopping periods. Causes and weight percentage of failures due to fatigue. Sealing system with simple labyrinth.
статья, добавлен 27.12.2016Application and classification of construction materials. Definition of key indicators affecting the choice of material. Alloys based on copper and aluminum. Properties, applications and benefits of innovative materials, thermosetting plastics, ceramics.
статья, добавлен 10.03.2019Square Lead-Rubber Bearings with four lead plugs to round Lead-Rubber Bearings with one lead plugs and shorten the analysis time. Comparison of load-deformation relationship. Comparison of the change in the outer edge temperature of the laminated rubber.
статья, добавлен 10.10.2021Types of the combined mechanisms of simultaneous turning and folding blades, which can be stabilized the frequency of rotation of horizontal-axis wind turbines. Analysis of the dependence of the adjusting movement of the slide from rotation angles.
статья, добавлен 27.10.2016The analysis of the cement production process in Ghana, which is limited to grinding clinker into cement and its packaging and distribution. The equipment of grinding chains, the best configuration. Control methods used for cement grinding chains.
статья, добавлен 30.05.2018A divider for planar antennas is considered. Diffraction problems for junctions of planar waveguides with infinitely thin walls and for walls with finite thickness are considered in the article. Some important for design numerical results are presented.
статья, добавлен 04.11.2018The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022Optical properties of nanocomposites are important and useful in their consumer satisfaction capacities. In this research, coloration properties of dyed PA6/Nano TiO2 nanocomposite is studied using a combined Mie and Kubelka-Munk light scattering theory.
статья, добавлен 30.07.2016- 120. Features of check directional power relay series rbm through the use of digital testing systems
Evaluation of the effectiveness of electronic test during verification of the direction and power of electric switches connecting or disconnecting the circuit when certain conditions are met. The study of the performance of Electromechanical relays.
статья, добавлен 14.09.2016 Defining of dimensional relationships where the aspect ratio. The building process for 3D microdevices. The features of creation surface energy high enough to maintain adhesion of the electroplated material until completion of the plating process.
реферат, добавлен 16.04.2017Improving matching techniques constructional and technological parameters of the installation with the modes of its work taking into account the features of the resonator. The changes in the dielectric parameters of raw material during the heat treatment.
автореферат, добавлен 30.04.2018Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022Features of the application of methods for monitoring the state of the wooden structure in the production flow. Ways to optimize the prediction of wood properties using various NDE methods. The combination of methods for effective quality control of wood.
статья, добавлен 29.11.2018Creating Levi Strauss jeans in a working quality clothing for farmers. Features tissue, characteristic for trousers. Popularity of jeans among young people. A patent to a production of "workers in overalls strapless with pockets for knife and money".
презентация, добавлен 14.03.2017