Strength characteristics of a composite laminate with a center hole under biaxial tensile loading
The developing of a useful model dealing directly with biaxial loading of composite plates with stress concentrations, which can be called progressive damage model. Progressive damage model was utilized to analyze the damage evolution of specimen.
Подобные документы
A method of determining the effective longitudinal elastic modulus for the composite material in the problem of longitudinal tensile composite. Unidirectional composite material with a hexagonal arrangement of fibers. The effective elastic modulus.
статья, добавлен 27.09.2016The model of the disperse material behavior under vibration in the hole of the dispenser based on the Navier-Stokes equations. The influence of the power factor on the movement of the product and the parameters of the hole on the vibrating dosing process.
статья, добавлен 14.09.2016The developing of the numerical model of viscoelastic material using finite element method. The comparison of the obtained results with use of FEM software with experimental data. The calculation of the stress and strain state of the asphalt specimen.
статья, добавлен 29.09.2016Solution of the problem of the theory of elasticity for a composite in the form of a half-space with a thick-walled round cylindrical tube and a layer rigidly attached to the surface of the half-space. Assessment of the stress state of the composite.
статья, добавлен 26.02.2021Integration of the R.I. 01 industrial robot into the working system of the BB-01 flexible line. Operational and design features of the R.I. 01 loading robot. The central spindle of the system. The horizontal frame holding the arm of the loading robot.
статья, добавлен 25.10.2010Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022Damage assessment of components of automobile and aircraft internal combustion engines, made of gamma titanium aluminides. Recommendations to prevent the negative influence of high temperatures in multilayer thin films on gamma titanium aluminides.
статья, добавлен 14.07.2016Evaluation of the technical system and its subsequent use for decision-making to ensure complex technical systems with appropriate quality of work. The characteristics and specificity of the model changes performance States based on the Markov chain.
статья, добавлен 29.01.2016Events held before the loading and unloading of heavy cargo, including taking into account the fact that the ship has an initial roll angle. The position of the keel when loading. The main criteria of ship stability during heavy lift operations.
статья, добавлен 28.09.2016Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.
статья, добавлен 30.07.2016Influence of the type of machining and tool material on the structural state of the surface layer of steel during machining. Advantages of turning with composite 10 incisors compared to grinding. The occurrence of tensile stresses during metal processing.
статья, добавлен 14.09.2016Wind turbine concept with air duct. Influence of the exit area and entry area on aerodynamic characteristics. Designing a new model of Invelox. The need to install a curtain at the end of the air intake to change the direction of the air flow up, down.
статья, добавлен 08.03.2021Definitions and models of control in water supply and sanitation industry. Concession model of control sanitation industry in international practice. Condition of networks and evolution of model. Research limitations and future research directions.
дипломная работа, добавлен 13.11.2015Estimating the number of conduction modes can, their evaluation. Analysis of the model for the mean free path for backscattering. Calculation of near equilibrium thermoelectric transfer coefficients. Setting the differences in voltage and temperature.
статья, добавлен 30.07.2016The base of constructing computer model of the analysis of complex physical-chemical phenomena in the process ORIEN in continuous arc furnace is as the main aggregate of energy-metallurgical complex. A mathematical model of physical-chemical processes.
статья, добавлен 02.11.2018Defining and analysis the essence of robot is an automatic device, which has a manipulator – mechanical analogue of human hand, and manipulator control system. Consideration and characteristic of the structural features model of domestic robot–helper.
статья, добавлен 29.01.2016Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016Characteristics of mathematical model of dynamic processes that occur in frictional hardening of flat surfaces of machine parts with use of the tool with the cut transverse grooves on its working parts. Cyclic circuit of the machine’s oscillations.
статья, добавлен 14.09.2016Consideration the vibroactivity in the refined dynamic model of the mandrel bar. An acoustic positioning system of screw-rolling mill. The study of dynamic processes in the tube. Mathematical model of vibroactivity of screw-rolling mill mandrel bar.
статья, добавлен 30.01.2016Biodegradable poly-3-hydroxybutyrate [P(3HB)] and birch sawdust - a material for the preparation of powder mixtures for molds in the production of granules and tablets. The prospect of a composite obtained on this basis for the building industry.
статья, добавлен 17.04.2022Various kinds of mathematical models of a snakelike robot motion depending on gait pattern. Simplified model of a snake. The motion sequence of three-mass system. The average velocity depending on number of masses. Determination of optimal masses number.
статья, добавлен 27.08.2020An overview of the current trend in the development, production and application of efficient biodegradable polymer materials and composites. Ways of hybrid modification of biodegradable polymeric composite for obtaining effective products based on them.
статья, добавлен 24.09.2023Determination of a fire area during the time of its unobstructed development, the amount of the devices for the fire extinguishing agent supply. Consideration features of its mathematical model of the optimization in the woodworking enterprises workshops.
статья, добавлен 20.11.2014Extraction of lithium using highly selective inorganic ion exchangers. Composite matrix-isolated flocculants-coagulants. Matrix isolation method is one of the directions of nanotechnology. The technology of application functional nanocomposite materials.
статья, добавлен 31.10.2017А technology for manufacturing composite materials - flocculants-coagulants on aluminum-silicon and iron-silicon base. The evaluation of the effectiveness of the developed flocculants-coagulants for cleaning of natural water and industrial wastewater.
статья, добавлен 11.01.2018