Methods of heat engineering tests for thermal hydrodynamic pumps.
Development of methods for heat engineering tests of hydrodynamic pumps. Processes which occur in activator with water thermal hydrodynamic pump. Water flow speeds in a system. Gas bubbles are the product of centrifugal force effecting on carrier flow.
Подобные документы
The work of complex heat-recovery systems using water-hiting and air-heating heat-recovery exchangers was investigated. The combined use recovered heat to heat the return heat-network water, water of chemical water-purification system or combustion air.
статья, добавлен 22.04.2021System for billet continuous caster’s mould heat engineering parameters monitoring. Formation of the internal heat transfer surfaces. Calculation the indicators: average heat flux density, overall heat exchange coefficient. Effective gas gap thickness.
статья, добавлен 30.01.2016Analysis of the development of the basic methods of engineering the contact surfaces of tribological systems. Characteristics of the problems and prospects of development of technologies of creating surfaces of discrete-oriented structure of the system.
статья, добавлен 18.02.2016Theoretical studies allow developing a theoretical substantiated method for calculating the stability of spray vortex countercurrent mass transfer device. Review and characterization of the effect on the drop centrifugal force and resistance forces.
статья, добавлен 14.07.2016The main objective is the operation of heating systems heat supply residential, public and industrial buildings and structures in order to provide municipal needs (heating, ventilation and hot water supply). Checking calculation of heat supply systems.
статья, добавлен 10.03.2019Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.
статья, добавлен 02.06.2014Comparison of thermal insulation properties of Sakhabult products with products of other manufacturers. Manufacturing of a dummy for monitoring the temperature difference inside sleeping bags and outerwear from natural fur of fur animals, deer and horses.
статья, добавлен 01.04.2021The link between scientific discoveries and their subsequent applications to human needs and quality of life. History and main branches of engineering. Social context of engineering in Ukraine. European federation of engineering consultancy associations.
реферат, добавлен 16.11.2014Features of the application of methods for monitoring the state of the wooden structure in the production flow. Ways to optimize the prediction of wood properties using various NDE methods. The combination of methods for effective quality control of wood.
статья, добавлен 29.11.2018The place of interdisciplinary educational technology in the system of engineering training. The role of the course of theoretical mechanics in the system of engineering disciplines. Presentation of scientific and subject knowledge of the discipline.
статья, добавлен 12.08.2020Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016The traditional irrigation method, based on simple open canal systems, is extremely ineffective for managing critical and limited water resources. Conduct a qualitative assessment of irrigation water losses due to evaporation and system inefficiencies.
статья, добавлен 03.10.2021A resource-saving technology complex processing of highly mineralized mine waters of mining enterprises of the Kryvyi Rih iron ore basin has been developed. Of all the known methods of water desalination, the only method in this case is reverse osmosis.
статья, добавлен 26.12.2023The containment reservoir is where water accumulates during the flood season, one of the facilities that are absolutely essential for the proper functioning of every city. Use of this type of site as an open public space, regardless of water filling.
статья, добавлен 20.09.2021Development of the composition of water-epoxy coating NIPU. Study the compatibility of components in water-based coatings. The optimum ratio of the components of the composition to obtain the necessary physical and mechanical properties of the coating.
статья, добавлен 29.07.2017Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.
презентация, добавлен 20.10.2014Combined heating - a modern way of organizing the heat supply of the house. Use of independent sources of thermal energy. The advantages of using solar collectors. The principle of operation of the stove, fireplace insert. Types of combination boilers.
доклад, добавлен 14.03.2019Proposal and implementation of a new methodology for calculating the bending finned tubes for heat exchange systems. Getting high-quality bends with minimum radius of bending pipes bimetallic and monometallic. The use of technology in the helical rolling.
статья, добавлен 24.02.2016Models which adequately combine technological parameters with indicators of treatment quality have been designed for the cavitation cleaning processes of sewage from organic admixtures. Water of industry and public water use it is considered as sewage.
статья, добавлен 14.09.2016The regularities of macromolecules behavior in the flow with longitudinal velocity gradient and manifested in this case effects of elastic deformations have importance in understanding the mechanism of anomalously high cutting power of water-polymer jet.
статья, добавлен 28.02.2016The main stages of the automatic assembly of cylinder connection. The structural elements of the flexible automated production. Prospect for the automation of machine building production. The main types of heat exchange in technological systems.
контрольная работа, добавлен 05.04.2016- 23. Structural and electro-physical properties of heterogenous film materials based on refractory metals
Structural phase composition analysis of heterogenous film materials based on refractory metals is presented. A thermal activity nature of their conductivity was determined. Of investigation were estimated thermal resistance coefficient and energy.
статья, добавлен 30.07.2016 The statement of basic materials. Engineering design has merit in continuous improvement of the basic parameters of the robot by applying newest outcomes of technology areas of mechanics, metallurgy, cybernetics to robot construction and control.
статья, добавлен 26.08.2020Development of a managed system architecture with the possibility of full-scale parametric optimization. Systematization of the architecture of the conversion system by the example of the technological process of liquid heating. Software designer EFFLI.
статья, добавлен 30.10.2016