Integrated approach to solving the fluid dynamics and heat transfer problems
Consideration an alternative, in relation to the widely used "differential" one, "integrated" approach to solving the dynamics problems. Determining the natural frequencies of fluctuations case of the free surface liquid in containers of various shapes.
Подобные документы
Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.
презентация, добавлен 20.10.2014System for billet continuous caster’s mould heat engineering parameters monitoring. Formation of the internal heat transfer surfaces. Calculation the indicators: average heat flux density, overall heat exchange coefficient. Effective gas gap thickness.
статья, добавлен 30.01.2016Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016Analysis a lot of problems which constrain the transfer of diesel engines on "ecological" fuel and showing opportunities of manufacturing this fuel on Ukrainian enterprises. Evaluation of innovation taking in consideration environmental protection.
статья, добавлен 13.09.2016Characterization of elastic properties of saturated hydrocarbons and associates resinous-asfaltenovyh of compounds by simulating molecular dynamics. Evaluation of rheological behavior of heavy oil the elasticity matrix of transversely isotropic material.
статья, добавлен 27.07.2016Study of problems the sufficient conditions for the existence of solutions of linear nonhomogeneous impulsive boundary value problems with small perturbations when generating boundary value problem of impulsive has solutions for arbitrary right-hand side.
статья, добавлен 30.01.2017The work of complex heat-recovery systems using water-hiting and air-heating heat-recovery exchangers was investigated. The combined use recovered heat to heat the return heat-network water, water of chemical water-purification system or combustion air.
статья, добавлен 22.04.2021- 8. The evaluation of snowdrifting simulation by snow and wind tunnel for urban design in winter cities
Factors of snowfall and wind load. Simulate snow and wind with wind tunnels that allow you to define the quality of city plans to reduce the impact of weather conditions. Computational fluid dynamics of snow drifts, its application in urban planning.
статья, добавлен 04.10.2021 Proposal and implementation of a new methodology for calculating the bending finned tubes for heat exchange systems. Getting high-quality bends with minimum radius of bending pipes bimetallic and monometallic. The use of technology in the helical rolling.
статья, добавлен 24.02.2016Consideration of the laws dynamics and growth of vapor bubbles and crystals in the solution. Study of dynamic behavior of a three-phase, two-component medium in an axially symmetric channel. Analysis of the conditions necessary for the crystallization.
статья, добавлен 24.02.2016The sustained propagation of combustion fronts in porous media is as a condition for the success of in situ combustion for oil recovery. The analysis of a method for modeling the propagation of combustion fronts in porous media. Problem of loss of a heat.
статья, добавлен 20.05.2013The surfactants have been objects of studies all over the world. Development of approach to surfactants with controllable structure and properties based on the natural raw materials applicable for cosmetics production as dispersed systems stabilizers.
статья, добавлен 23.09.2016The method of reducing costs and increasing the strength of threaded joints, which are currently used in every field of human activity. Experimental research on the relation between thermal treatment and strength of adhesively sealed joints was con
статья, добавлен 28.09.2016Use of fluid with magnetorheological effect in crane’s system can reduce significantly unwanted overload, vibrations and resonances arising from them. Applying periodically changing strengths of an external synchronized with cycles of periodical crane's.
статья, добавлен 28.11.2016General characteristics of gas motor fuel. The current state of the market of gas motor fuel and infrastructure for use of CNG. Problems in the development of the NGV market and their solutions. Analysis of interest in the use of natural gaseous fuels.
статья, добавлен 10.03.2019The comparison of natural modes for the first and second transverse oscillation modes obtained by numerical simulation and finite element package of analytical calculation of the core model. The analysis waveforms for different values of the defect.
статья, добавлен 29.06.2017There is considered contrariety of Pareto situations and Nash equilibrium situations in dyadic games. Their players’ payoffs are constrained by normal and uniform laws. Solving games in pure strategies there is the advantageousness in Pareto situations.
статья, добавлен 30.10.2016A resource-saving technology complex processing of highly mineralized mine waters of mining enterprises of the Kryvyi Rih iron ore basin has been developed. Of all the known methods of water desalination, the only method in this case is reverse osmosis.
статья, добавлен 26.12.2023Class of application of heat pumps in industry. Review of the carbon dioxide heat pump in the transcritical cycle of operation according to the expander-ejector scheme. Development of methods for selecting control valves for a given heat pump circuit.
статья, добавлен 02.02.2019The use of metallic pigments with features of the geometry of the surface of printing materials. Functionality of the "Materials Editor" program and a group of parameters of geometric surface structures. Assessment of surface structures in the 3D system.
статья, добавлен 12.06.2023Development of improved methods of calculation to quantify the anodic dissolution process began. Determining factors of electrochemical dissolution of the surface layers of steel, obtained at different process conditions electroerosion machining.
статья, добавлен 30.07.2016The methodical approach that is aimed at the efficient use of existing fixed assets and technological innovations introduction. Technical and technological components of the technological machine-building enterprise "Turbomash Ltd" development.
статья, добавлен 26.08.2016Consideration the influence of scandium on mechanical properties and heat-resistance of magnesium alloy ML10. Macrostructure of ML10 alloy with different scandium content. Sizes of microconstituents of heat-treated alloy with different scandium content.
статья, добавлен 30.01.2016Grinding machine and its use for finishing workpieces, which must demonstrate high surface quality and high accuracy of shapes and sizes. Roughing operations in which grinding removes large volumes of metal fairly quickly. The components of machine.
статья, добавлен 10.03.2019Analysis of the development of the basic methods of engineering the contact surfaces of tribological systems. Characteristics of the problems and prospects of development of technologies of creating surfaces of discrete-oriented structure of the system.
статья, добавлен 18.02.2016