Epoxy Waterborne Compositions Modified by Hydroxyurethanes
Development of the composition of water-epoxy coating NIPU. Study the compatibility of components in water-based coatings. The optimum ratio of the components of the composition to obtain the necessary physical and mechanical properties of the coating.
Подобные документы
The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".
статья, добавлен 06.05.2018Investigation of multilayer coatings with different bilayer periods 8-100 nm. Using of very thin layers in multilayered system leads to increasing of specific density of interphase boundaries and it leads to increasing of critical loading of destruction.
статья, добавлен 30.07.2016This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022Using and improvement of qualities of products of oil processing. The process of obtain a water-soluble colloidal sulfur with seating stability, good solubility in water, high biological activity. Selection of conditions to receiving polymeric products.
статья, добавлен 11.03.2019The concept and functional characteristics of diamond-like films of amorphous carbon with a high concentration of carbon with SP3. The peculiarities of their practical use. Diagram of the coating, its physical and chemical properties, the benefits.
статья, добавлен 12.06.2015The traditional irrigation method, based on simple open canal systems, is extremely ineffective for managing critical and limited water resources. Conduct a qualitative assessment of irrigation water losses due to evaporation and system inefficiencies.
статья, добавлен 03.10.2021Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016The study of methods of improving mechanical properties of coatings of implants by reducing the value of young's modulus and coefficient of friction in the fluids of the body to improve the tribological parameters of the implants with ceramic coatings.
статья, добавлен 29.01.2016Studies on the preparation of pasty high-filled compositions and evaluation of their rheological properties using a rotational visco-meter "Reotest-2" on the cone-plane system. Evaluation of sedimentation resistance of compositions and their flow.
статья, добавлен 30.10.2016Consideration the processes taking place in the metal pipe during prolonged use. Studing the complex physical and mechanical properties to assess the resistance to the destruction of the metal in the environment closest to the operating conditions.
статья, добавлен 30.01.2016The main criteria for the quality of a pile coating, obtained by electro-floating. Experimental data obtained on a sample of nylon pile used in applying pile coatings by electro-floating method, which prove the efficiency of the proposed method.
статья, добавлен 30.08.2020The containment reservoir is where water accumulates during the flood season, one of the facilities that are absolutely essential for the proper functioning of every city. Use of this type of site as an open public space, regardless of water filling.
статья, добавлен 20.09.2021Research of influence of the electric discharge machining on change the properties of water. The formation of free radicals and hydrogen peroxide under the influence of cavitation is established, which leads to an increase in the whiteness of the wool.
статья, добавлен 21.12.2016- 16. Structural and electro-physical properties of heterogenous film materials based on refractory metals
Structural phase composition analysis of heterogenous film materials based on refractory metals is presented. A thermal activity nature of their conductivity was determined. Of investigation were estimated thermal resistance coefficient and energy.
статья, добавлен 30.07.2016 The work of complex heat-recovery systems using water-hiting and air-heating heat-recovery exchangers was investigated. The combined use recovered heat to heat the return heat-network water, water of chemical water-purification system or combustion air.
статья, добавлен 22.04.2021The technology of polystyrene plastics. The application methods for industrial liquid coatings and finishes. The spraying, brushing, printing, and silk screening. The application methods for powder coatings and finishes. The electrostatic spray outfits.
статья, добавлен 10.03.2019The aim of the article is to consider issues related to the technological process of preserving and enriching the composition of milk. It is noted that milk, which is of great importance in nutrition due to the presence of proteins, fats, minerals.
статья, добавлен 04.10.2023Learning algorithm of consistent actions to obtain quality coatings made by the complex technological method electrocontact strengthening of sprayed coatings. Analysis Ishikawa diagram which allows identify the causes of the impairment coatings obtained.
статья, добавлен 29.01.2016The analysis of fire-resistant intumescent coatings, which are currently used in Ukraine and abroad, as well as prospects for the development of new intumescent coatings with improved properties, is carried out. Methods of fireproofing metal structures.
статья, добавлен 13.11.2023The main factors of physical phenomena that accompany the process of power explosive effect for the development of new processes of metal processing. Industrial testing of facing technology by explosion of artificial surfaces of complex configuration.
статья, добавлен 19.02.2019The comparative analysis of the microstructure, phase and chemical composition of the experimental alloys of the Fe-W type with the standardized grade ferrotungsten. The feasibility of using Fe-W for the manufacture high tungsten materials based on iron.
статья, добавлен 30.01.2016Definitions and models of control in water supply and sanitation industry. Concession model of control sanitation industry in international practice. Condition of networks and evolution of model. Research limitations and future research directions.
дипломная работа, добавлен 13.11.2015The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).
статья, добавлен 07.09.2022