The influence of plastic deformation on properties of gazars
Processes of change of mechanical properties and microtexture of castings from gazars. Effect of monolithic areas formation inside the porous structure. Consideration of monolithic formations inside porous structure of gazar after annealing, x 50.
Подобные документы
- 1. The influence mechanism of ferrite grain size on strength stress at the fatigue of low-carbon steel
The study of the properties of low carbon steel. Methods of cold plastic deformation. The rationale for the recommended annealing temperature. Is the microstructure of low-carbon metal. The study of the conditions of plastic deformation of ferrite.
статья, добавлен 29.01.2016 Consideration the processes taking place in the metal pipe during prolonged use. Studing the complex physical and mechanical properties to assess the resistance to the destruction of the metal in the environment closest to the operating conditions.
статья, добавлен 30.01.2016In this study, porous Ti-Nb-Zr biomaterial which is not included poison elements was successfully fabricated by powder metallurgy using space holder of NH4HCO3 and foaming agent of TiH2. Biocompatibility of porous Ti-Nb-Zr alloys is similar to Ti-6Al-4V.
статья, добавлен 30.07.2016Study of structure and properties of aluminum alloys treated with nanodispersed modifiers. Consideration of the classical theory of modification of melts. Creation of fine-grained structure of castings. Analysis of existing aluminum alloy modifiers.
статья, добавлен 21.04.2020The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016- 6. Investigation of properties of the constant technological track, which is used in bridge agriculture
Mechanical properties of soil traces of a permanent technological track and their influence on the traction and traction properties of a bridge agricultural machine of a new design. The research was conducted using the provisions of the tractor theory.
статья, добавлен 30.08.2022 The sustained propagation of combustion fronts in porous media is as a condition for the success of in situ combustion for oil recovery. The analysis of a method for modeling the propagation of combustion fronts in porous media. Problem of loss of a heat.
статья, добавлен 20.05.2013Consideration the influence of scandium on mechanical properties and heat-resistance of magnesium alloy ML10. Macrostructure of ML10 alloy with different scandium content. Sizes of microconstituents of heat-treated alloy with different scandium content.
статья, добавлен 30.01.2016Properties and structure of hydrocarbons. Types and communication aromatics. The nature of the relationship between the carbon atoms. The methods of extraction and processing of oil. The use of the rectification columns for fractionating of raw materials.
презентация, добавлен 30.06.2014Comparison of thermal insulation properties of Sakhabult products with products of other manufacturers. Manufacturing of a dummy for monitoring the temperature difference inside sleeping bags and outerwear from natural fur of fur animals, deer and horses.
статья, добавлен 01.04.2021Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
статья, добавлен 21.12.2016Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016The two main methods of mechanical assembly of plastic parts. Requirements for reliable mechanically bonded plastic joints. Special consideration for composites. The main advantages and disadvantages of adhesive bonding (gluing or glue bonding).
статья, добавлен 10.03.2019The study of structural changes during hot deformation metal during controlled rolling. The influence of preheating temperature and deformation degree on the size and shape of austenite grains. The definition of the polygonal structure of the austenite.
статья, добавлен 30.01.2017Investigation of physical and mechanical properties of the cement using of barium-containing clinker and gypsum stone. Effect of additives of barium-containing sulfateferrite clinker gypsum stone. Longer hardening and limits and compressive strength.
статья, добавлен 23.02.2016Research of influence of the electric discharge machining on change the properties of water. The formation of free radicals and hydrogen peroxide under the influence of cavitation is established, which leads to an increase in the whiteness of the wool.
статья, добавлен 21.12.2016- 17. The influence of modified methyl cellulose on the main properties of expanding cementing slurries
The effect of modified methylcellulose on the main properties of expanding cementing slurries. When cementing low-temperature wells, expanding cementing slurries based on a mixture of Portland cement (70-75% PCT-I) and gypsum alumina cement (30-25% GAC).
статья, добавлен 04.09.2024 Consideration the mathematical model of process of pressing of seamless pipes. Effect on various forms of rolling shaping matrix. The nature of the formation of the deformation zone. Development of direct compression on a cylindrical mandrel pipe.
статья, добавлен 30.01.2016Nanocomposites comprising ray in a polymer. The reflection mechanical properties material. Increasing the polymer properties by forming the interphase. Obtaining curves of stress-strain states of macroscopic samples irradiated polymer materials.
статья, добавлен 30.07.2016Determination of material properties of polymeric resins. Processing and finishing operations commonly used in the manufacture of plastic products. Analysis of relative differences in the coefficient of thermal expansion and modulus of elasticity.
статья, добавлен 10.03.2019A lightweight, environmentally friendly nanocomposite based on thermoplastic potato starch plasticized with glycerin is described. Adding cellulose nanofibers, improving the barrier properties of films due to the tortuous path for penetrating molecules.
статья, добавлен 14.04.2022Creep and fatigue in polymer matrix composites. Stages, characteristics and deformation of creep. Mechanisms of creep. General creep equation. Dislocation, nabarro-herring, coble creep. Creep of polymers, of concrete. The molecular weight of the polymer.
курсовая работа, добавлен 02.02.2015The surfactants have been objects of studies all over the world. Development of approach to surfactants with controllable structure and properties based on the natural raw materials applicable for cosmetics production as dispersed systems stabilizers.
статья, добавлен 23.09.2016Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016Features of the application of methods for monitoring the state of the wooden structure in the production flow. Ways to optimize the prediction of wood properties using various NDE methods. The combination of methods for effective quality control of wood.
статья, добавлен 29.11.2018