Polygonizing controlled rolling of slabs for making oil country tubes
The study of structural changes during hot deformation metal during controlled rolling. The influence of preheating temperature and deformation degree on the size and shape of austenite grains. The definition of the polygonal structure of the austenite.
Подобные документы
The study of methods of improving mechanical properties of coatings of implants by reducing the value of young's modulus and coefficient of friction in the fluids of the body to improve the tribological parameters of the implants with ceramic coatings.
статья, добавлен 29.01.2016Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
статья, добавлен 30.07.2016Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016A study of the collections of young Moldovan designers, graduates of the KSPU. I. Kryanga. Conceptual trends in the contemporary art of design and fashion in the country, based on the creative interpretation of artistic images by young designers.
статья, добавлен 22.05.2022Study of evolutionary processes of Chinese space policy, transformation of the country into one of the space leaders. Progress of space technology, applications, science. Guiding principles of international cooperation in the field of space cooperation.
статья, добавлен 25.11.2023Synthesis of a batch of aluminum-doped titanium dioxide and testing the reaction of photocatalytic degradation of phenol in an aqueous suspension. Studies of the crystal structure of rutile anatase using XRD, XPS, Raman spectroscopy and EMF methods.
статья, добавлен 25.08.2017Investigation of the surface layer structure at high resolution. Study of surface morphology of treated detail. The use of electric-surface alloying components operating under conditions of friction and abrasionerosion wear and their restoration.
статья, добавлен 22.03.2016The recent work on Micro Aerial Vehicles (MAV) at the Institute of Aerospace Systems. Basics of MAV Research. Flightmechanical simulation. Wind tunnel tests. Overall controller system structure. The inertial measurement unit. On-Board computer structure.
творческая работа, добавлен 18.01.2014Study of field distribution in structures such as a gold lattice, a graphene layer, and a silicon substrate. Conditions of maximum electromagnetic field distribution by these structures for the purpose of using them in photonics and electronics devices.
статья, добавлен 24.02.2024Substantiation of expediency of enzymatic processing of canola meal for increasing its nutritional value. The role of enzymatic hydrolysis in reducing the amount of cellulose and hemicelluloses, increasing the amount of free phosphorus in rapeseed rape.
статья, добавлен 30.04.2018Special supervisory control system responsible for the informative data acquisition about the current enterprise production and its control. The main SCADA. The general structure of SCADA. The Three main structure components modern SCADA-systems.
статья, добавлен 30.04.2019Проектирование современного технологического процесса монтажа, эксплуатации, технического обслуживания и ремонта универсально токарно-винтового станка с УЦИ. Назначение и область применения. Возможные неисправности, их причины и методы устранения.
дипломная работа, добавлен 04.06.2021Thermosetting plastics, their irreversible chemical reaction (polymerization), including the effects of temperature and time. Bringing the resin composition to a liquid state, forcing the liquid to flow into the cavity of the desired configuration.
статья, добавлен 10.03.2019The development of a new functional proposition, which uses the Poisson and Weibull distribution components, to simulate a functional U-shaped function. Estimating the effectiveness of the developed functional representation by numerical examples.
статья, добавлен 12.02.2019The conductive nanocomposite films on the basis of reactionary copolymers received. The threshold of their percolation is determined. It was shown that its value depends on the size of specific surface of nanotubes and conditions of composite obtaining.
статья, добавлен 23.09.2016Dynamic designer as a way to save time and cost of getting new products to market, and improving old ones without a huge investment in equipment. Using parametric solid models for to develop the form of the parts. Mechanical desktop to build prototypes.
презентация, добавлен 21.02.2014Analysis of a mathematical model to determine the transient modes of rotary kilns, drying drums and mills taking into account electromagnetic processes in the induction motor. Mechanical vibrations of the elements of the drive mechanism, long metal body.
статья, добавлен 14.09.2016Estimating the number of conduction modes can, their evaluation. Analysis of the model for the mean free path for backscattering. Calculation of near equilibrium thermoelectric transfer coefficients. Setting the differences in voltage and temperature.
статья, добавлен 30.07.2016Fast fatigue crack growth. The general content of nitrogen in the alloy system that limits fatigue life. Fragmenting the titanium sponge into small pieces and using various melting methods metals. Investigation of the Partially Melted Electrodes.
статья, добавлен 10.12.2018The study of the formation mechanism of flavonoid complex with aluminum ions. On the basis of the negative low Gibbs free energy values it found that chelation is a natural phenomenon. Determination of the antioxidant capacity of flavonoids stevia leaf.
статья, добавлен 30.01.2016Types of tool materials: from high-carbon steel to ceramics and diamonds, and their use as cutting tools in the modern metal industry. Cutting tool and its characteristics: hardness, strength. Achieving an acceptable tool life before replacing it.
статья, добавлен 26.04.2019Mechanical tests of with various hydrogen concentrations before and after the hydride reorientation tests were performed. Hydrogen pickup measurements in zirconium alloys: relation to oxidation kinetics. Hydride microstructure in the dummy claddings.
статья, добавлен 30.05.2021The obstacle in the way of nanotechnologies is the lack of selective "scalpel and forceps", the instruments to operate with particles of size less than 10-9 meters, particularly with molecules and atoms. Atomic forceps and scalpel for nanotechnologies.
статья, добавлен 29.12.2023Comparison of thermal insulation properties of Sakhabult products with products of other manufacturers. Manufacturing of a dummy for monitoring the temperature difference inside sleeping bags and outerwear from natural fur of fur animals, deer and horses.
статья, добавлен 01.04.2021