The influence of modified methyl cellulose on the main properties of expanding cementing slurries
The effect of modified methylcellulose on the main properties of expanding cementing slurries. When cementing low-temperature wells, expanding cementing slurries based on a mixture of Portland cement (70-75% PCT-I) and gypsum alumina cement (30-25% GAC).
Подобные документы
The flexural and compressive strength of mortar by partial replacement of cement with Nano-ZnO particles has been studied. The results showed that the flexural and compressive strength of the cement mortars with ZnO were higher than pure cement mortar.
статья, добавлен 12.06.2018A lightweight, environmentally friendly nanocomposite based on thermoplastic potato starch plasticized with glycerin is described. Adding cellulose nanofibers, improving the barrier properties of films due to the tortuous path for penetrating molecules.
статья, добавлен 14.04.2022Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016The analysis of the cement production process in Ghana, which is limited to grinding clinker into cement and its packaging and distribution. The equipment of grinding chains, the best configuration. Control methods used for cement grinding chains.
статья, добавлен 30.05.2018Consideration the processes taking place in the metal pipe during prolonged use. Studing the complex physical and mechanical properties to assess the resistance to the destruction of the metal in the environment closest to the operating conditions.
статья, добавлен 30.01.2016Research foaming effect, which can be the addition of zeolite in the asphalt mixture that causes the of the asphalt, better adhesion and ability lehkoukladalnist mixture. Characteristics of adsorbed water allocation as a function of time and temperature.
статья, добавлен 24.02.2016Development of the composition of water-epoxy coating NIPU. Study the compatibility of components in water-based coatings. The optimum ratio of the components of the composition to obtain the necessary physical and mechanical properties of the coating.
статья, добавлен 29.07.2017Test the tribological properties of lubricants as the main stage of assessing their suitability for use in friction. The scheme of the "cone - three ball" with the use of objects of simple geometric shapes to test different construction materials.
статья, добавлен 29.01.2016Processes of change of mechanical properties and microtexture of castings from gazars. Effect of monolithic areas formation inside the porous structure. Consideration of monolithic formations inside porous structure of gazar after annealing, x 50.
статья, добавлен 30.01.2016- 11. Investigation of properties of the constant technological track, which is used in bridge agriculture
Mechanical properties of soil traces of a permanent technological track and their influence on the traction and traction properties of a bridge agricultural machine of a new design. The research was conducted using the provisions of the tractor theory.
статья, добавлен 30.08.2022 Optical properties of nanocomposites are important and useful in their consumer satisfaction capacities. In this research, coloration properties of dyed PA6/Nano TiO2 nanocomposite is studied using a combined Mie and Kubelka-Munk light scattering theory.
статья, добавлен 30.07.2016Comparison of thermal insulation properties of Sakhabult products with products of other manufacturers. Manufacturing of a dummy for monitoring the temperature difference inside sleeping bags and outerwear from natural fur of fur animals, deer and horses.
статья, добавлен 01.04.2021Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016Characteristics of jet fuels: general information and properties. Fractional composition: initial boiling point and 10% fuel distillation temperature, 50% fuel distillation temperature and temperature of 90 % fuel distillation (t90) and dry point.
контрольная работа, добавлен 06.12.2014Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
статья, добавлен 21.12.2016- 17. Chemical modification of aminopolysaccharide from shrimp shell by direct connection with polyaniline
Modification of aminopolysaccharide by deacetylation of chitin from the shrimp shell using the enzyme as a biocatalyst and microwave energy. The influence of temperature and reaction time, the ratio of aminopolysaccharide to aniline on its properties.
статья, добавлен 10.08.2020 Obtaining complex fertilizers by oxidation of Angren brown coal with a mixture of nitric and sulfuric acids and decomposition of oxidation products with a mineralized mass and slime phosphorite of the Central Kyzyl Kum. Fertilizers' commercial properties.
статья, добавлен 27.01.2021Properties and structure of hydrocarbons. Types and communication aromatics. The nature of the relationship between the carbon atoms. The methods of extraction and processing of oil. The use of the rectification columns for fractionating of raw materials.
презентация, добавлен 30.06.2014- 20. The influence mechanism of ferrite grain size on strength stress at the fatigue of low-carbon steel
The study of the properties of low carbon steel. Methods of cold plastic deformation. The rationale for the recommended annealing temperature. Is the microstructure of low-carbon metal. The study of the conditions of plastic deformation of ferrite.
статья, добавлен 29.01.2016 Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021Consideration the influence of scandium on mechanical properties and heat-resistance of magnesium alloy ML10. Macrostructure of ML10 alloy with different scandium content. Sizes of microconstituents of heat-treated alloy with different scandium content.
статья, добавлен 30.01.2016Research process to ensure the values of the endurance limit of the material details. The establishment of correlations between the modes of machining, quality of the surface layer and the fatigue limit. The characteristics of processed material.
статья, добавлен 14.09.2016Impact indicators coal shiites in the properties of the resulting coke. Coking process with the help of passive experiment. Effect of changes in the number of components of the coal charge on the quality of the coke at various technologies of sintering.
статья, добавлен 29.07.2016The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).
статья, добавлен 07.09.2022