Preliminary studies of dynamic parameters inmultimaterial structureswith the addition of zeolite
Characteristics of study results colocating method dampfmuhlenweg parameters of vibration in the constructions with the addition of zeolite on the example of three models containing a modified binder in which the concrete was replaced with zeolite.
Подобные документы
The analysis of possibility of use of natural aluminosilicates (zeolite) in agriculture and environmental protection in the production of mineral fertilizers for remediation of soils contaminated with heavy metals. Their physical and chemical properties.
статья, добавлен 24.02.2016Definition concrete mixture composition with the additives of zeolitic tuff and superplasticizer was optimized by the method of mathematical planning of experiment. Study the basic methods to improve the strength of concrete at a later age hardening.
статья, добавлен 24.02.2016Consideration investigations of cement and sulfur concrete endurance, including concretes reinforced with glass fibre under the action of repeated load and variable humidity. Study of concrete different in structure, form and of a modified binder.
статья, добавлен 24.02.2016The model of concrete structure with porous and dense fillers. Geometric parameters of the filler. The filler inclusion with a constant and a variable width of the contact zone. Concrete polished sections. The geometrical parameters of the initial defect.
статья, добавлен 30.04.2018Consideration of the preparation of sorbents for adsorption of polymers on their surface. Their modification in solutions and the creation of composite materials, in particular polymer. Definition of disadvantages of adsorbents as sorbents for plastics.
статья, добавлен 24.02.2016The influence of technological factors on the formation of properties of finegrained concrete. Rapid hardening concrete, modified with complex chemical admixtures, for prestressed precast hollow core slabs produced by continuous extrusion forming.
статья, добавлен 24.02.2016The use of iron oxide (III) as a ceramic pigment. Method of obtaining of pigment with the addition of lanthanum. The calcination temperature and results of thermal and colorimetric analyses, infrared and UV-visible spectroscopy and X-ray diffraction.
статья, добавлен 15.01.2014The stages and principles of developing a device for measuring the geometric parameters of the road and calculating the IRI. Justification of the block diagram, element base, test board and verification of the operating characteristics of the sensors.
статья, добавлен 17.02.2019Prestressed concrete as a building material, to overcome the inability of concrete to resist significant tensile stresses. Design of prestressed concrete and their characteristics. Operation and application of the principle of prestressed concrete.
реферат, добавлен 01.04.2016A study of the rheological properties of self-compacting fiber reinforced concrete mixtures with additives of modifiers and microfillers. Investigation of the basic performance characteristics of concrete based on these mixtures has been carried out.
статья, добавлен 24.02.2016Seismic observation and discussion of the possibility of using the steel reinforced concrete building during a strong earthquake. Monitoring the structural deterioration with age and the structural changes by experiencing various levels of earthquakes.
статья, добавлен 26.09.2021The results of an experimental study of compressive behavior of concrete confined by natural fiber reinforced polymer jackets. Natural Fibre-Reinforced Polymer is expected to be alternate jacket material with lower cost and more eco-friendly material.
статья, добавлен 29.09.2021Domed cover as relevant and architecturally expressive design. The study of stress-strain state of thin concrete shells-domes. Comparative characteristics of surfaces in similar geometric forms. The definition of more rational forms of the two possible.
статья, добавлен 29.08.2016A review of structural models and a comparison of their capabilities in predicting the load-deformation response of a wide range of reinforced concrete elements. Determining the best model based on the coefficient of variation and the mean of the tests.
статья, добавлен 15.04.2024The results of determining the porosity of the cement stone. It identified a number of positive factors that contribute to the improvement of the physical and mechanical characteristics of cement composites by introducing the silica-containing additives.
статья, добавлен 06.05.2018The finite element method for prediction of crack resistance of concrete structures based on cements different types. Temperature evolution in the concretes from different cements. Crack tip critical stress intensity factor and width of crack opening.
статья, добавлен 03.06.2016Development of heating coating for runways of airfields and highways. Using concrete reinforced with chemical electrically conductive fibers. Definition condensed elasticity characteristics of cluster layers. Calculation of heated construction of shell.
статья, добавлен 02.10.2018The objectives of the MIDAS iGen study. Development of an earthquake-resistant model for the reconstruction of a Buddhist sanctuary in Kamakura Taiheiji. Analysis of the main structural characteristics of the wooden structures of the Engakuji Temple.
статья, добавлен 08.10.2021Analysis and assessment of the "architectural environment" phenomenon. Characteristics, signs, properties, parameters, criteria for the formation of an environmental formation. Comparison of traditional and innovative methods and directions of research.
статья, добавлен 26.12.2023Investigation of the basic methods of calculating bearing capacity of reinforced concrete strengthened in different ways. The establishment features reception calculation data on the bearing capacity of the reinforced concrete beams designed building.
статья, добавлен 24.02.2016The approaches to create smart and enhance its properties while reducing the cost of overall use of the material. Factors that affect the use of self-healing concrete. Application in architectural designs and small-size and medium-sized buildings.
статья, добавлен 27.02.2018Study of bearing capacity, cracking and deformability of reinforced and unreinforced slabs, made of non-autoclave foam concrete, which was tested on the bursting of the rigid stamp with a load of about 0.6 from the Ncr and limiting restaruant foam.
статья, добавлен 24.02.2016Assessment of the seismic vulnerability of existing reinforced concrete buildings in Japan, design of their seismic reconstruction. Testing of reinforced concrete columns by various loading methods, the occurrence of which is possible during earthquakes.
статья, добавлен 12.09.2021Guidance the calculation of bearing capacity of inclined sections of reinforced concrete elements strengthened with external composite reinforcement using a deformation model DBN.2.6.-98:2009 and engineering methodology presented in SNiP 2.03.01-84.
статья, добавлен 24.02.2016- 25. Reviewthe calculation methods ofmonolithic reinforced concrete flat overlapwith the hollow inserts
The methods that were used and can be used to general static calculation of the monolithic concrete slabs, including cavity forming with inserts. Calculation of overlap with tubular inserts. Actual and calculated section slabs with tubular inserts.
статья, добавлен 24.02.2016