Structural properties of the SnxSy films obtained by the thermal vacuum Co-evaporation
The temperature dependence of the sulfur and tin vapor. Influence of growth conditions on the morphology of the surface and structural properties of the films with the stoichiometric composition and substrate temperature on their chemical composition.
Подобные документы
Consideration of the results of x-ray diffraction of the considered chemical compounds. Structural properties of the films of magnesium oxide. Substantiation of optimum parameters of temperature of synthesis of organic and many inorganic compounds.
статья, добавлен 30.07.2016Investigation of optical absorption spectra of YAG: Cr, Mg, and GGG: Cr, Mg films during high-temperature annealing in oxidation and reduction atmospheres. Factors to increase in absorption in the visible region, the charge exchange of chromium ions.
статья, добавлен 29.09.2016Depth profiles of the near-surface region and chemical composition for amorphous films deposited from Ge33As12Se55 bulk glasses and their changes resulting ageing under ambient conditions have been studied by the methods of Auger electron spectroscopy.
автореферат, добавлен 02.04.2014- 4. Review of graphene properties in view of its use as a substrate for matrix-free mass spectrometry
The graphene basic properties is given. The possible role of intrinsic and deliberately induced structural defects in electronic and chemical properties of graphene substrates. Optimized geometric structures for the Stone-Wales defect functionalized.
статья, добавлен 02.04.2014 The sequence of structural transformations occurring during the thermolysis of the solid solution of diphosphates of composition Zn-Co(II). The composition, temperature ranges of formation and stability of the products of partial, complete dewatering.
статья, добавлен 23.02.2017A controlling the morphology of zinc hydroxide and zinc oxide at room temperature without using any template or surface ligand. Identify the precipitated materials. Dependence of ZnO morphology on Zn2+ concentration. Scanning electron microscopy of zinc.
статья, добавлен 30.07.2016Sulfur - substance that be in the most kinds of steel. Research of influence of ladle furnace reductants in the desulfurization process. Control ultra-low sulfur steel. The chemical degassing in the ladle furnace-vacuum. Maintaining a low sulfur content.
статья, добавлен 30.01.2016Influence of temperature on the photoluminescence of rhodamine deposited on array of the gold nanoparticles was studied. The factor of surface plasmonic enhancement of rhodamine luminescence. Electron-phonon scattering and thermal expansion of the gold.
статья, добавлен 30.07.2016Monomers conversion dependence on reaction mixture composition. Consideration of the dependence cooligomer of and its characteristics, average molecular weight. Study of liquid products of pyrolysis of hydrocarbons: styrene and dicyclopentadiene.
статья, добавлен 23.02.2016Obtaining via hydrolysis of tetraethylorthosilicate in presence of template agent Pluronic P123 Ag/Au bimetallic nanoparticles in porous sol-gel silica films on glass. Definite amounts of AgNO3 and HAuCl4 by dip-coating procedure by a thermal treatment.
статья, добавлен 01.04.2014Treating the properties of oxidized activated carbon KAU by different temperatures in inert atmosphere were studied by means of DTA, Boehm titration, XPS and AFM methods and their catalytic activity in hydrogen sulphide oxidation was established.
статья, добавлен 04.04.2014The study of the composition and the structure of the original and modified lignocellulosic materials. Analysis of the dependence of sorption properties of lignocellulosic composites in relation to heavy metals from changes in the functional composition.
статья, добавлен 04.04.2014A sample of Mg10Ir19B16, prepared from the elements by high-temperature treatment in sealed Ta containers. The chemical composition, confirmed by WDXS analysis. Electronic structure calculations and chemical bonding analysis by the ELI/ED approach.
статья, добавлен 23.02.2017Plastic additives as a wide range of chemicals used by resin manufacturers, compounds and manufacturers to improve the properties, processing and characteristics of polymers. Features of their chemical composition and conditions of effective use.
статья, добавлен 10.03.2019- 15. Growth of zinc oxide porous films via electrochemical anodization using glycerol based electrolyte
Formation of the porous structure of zinc oxide. Morphological properties of anodized films. Methods of diffraction of X-rays and scanning electron microscopy. Analysis of electrochemical anodizing of zinc oxide in electrolyte based on glycerol.
статья, добавлен 30.08.2016 Characteristics of the methods of improving the electrical properties, the proper maintenance alloys for electrical purposes. Analysis of the influence of heating temperature on microhardness of the types foreign made Aluminium-Zirconium alloy wires.
статья, добавлен 25.12.2016The use of block copolymers on the basis of oxides of ethylene and propylene as demulsifiers of oil emulsions. Determination of the dependence of their physico-chemical properties from the content oxyethylene and oxypropylene groups in the molecule.
статья, добавлен 23.02.2016Influence of synthesis conditions on ceria particles size. Anticorrosion properties of modified carbon nanotubes. Realization the synthesis in aqueous solution at room temperature that reduces the cost of the preparation procedure of nanosized ceria.
статья, добавлен 04.04.2014Research transparent conducting n-type semiconductor zinc oxide films, which have been extensively studied in recent year because they exhibit wide band gap. Analysis of scanning electron microscopy which used for study of surface morphological changes.
статья, добавлен 30.07.2016Influence of increasing the temperature of thermochemical activation of up to 750 °C and increasing the dosage of potassium hydroxide to 2.1 g/g of activated carbon synthesis of hydrolytic lignin on the formation of adsorption properties of the AC.
статья, добавлен 30.07.2017Microporous structure of outgoing and thermally modified plant-extracted carbon material. Porous system characteristics by different methods on low temperature adsorption-desorption. Сharacteristic of most effective thermal modifications form nanopores.
статья, добавлен 24.02.2016- 22. The influence of modified methyl cellulose on the main properties of expanding cementing slurries
The effect of modified methylcellulose on the main properties of expanding cementing slurries. When cementing low-temperature wells, expanding cementing slurries based on a mixture of Portland cement and gypsum alumina cement cement (30-25% GAC) are used.
статья, добавлен 20.03.2024 The influence of low-molecular additives on the composition of polyvinylpyrrolidone with hydroxyethyl compositions. Adhesion based on the angle of wetting compositions. The effect of different additives on the adhesive strength of the adhesive joint.
статья, добавлен 21.12.2016Friction units for automotive and special vehicles are designed to operate under friction conditions. The development of a unified understanding of the effect of the size and chemical nature of ceramic additives on the processes occurring in a friction.
статья, добавлен 22.05.2022Determine the optimal parameters of synthesis and base properties of nano-tubular crystals Mg-Ni chrysotiles. temperature ranges and pressure for the synthesis of nano-tubular crystals all synthesed chrysotile at the time of isothermal exposure.
статья, добавлен 30.07.2016