Synthesis, structure, and characteristic of Zn(II) and Cd(II) coordination compounds with 3-methoxybenzene acid hydrazide and their biological activity
Getting the coordination compounds of Zn (II) and Cd (II) from 3-methoxybenzene acid hydrazide using hot etanolnyh or water-ethanol solutions in weakly acidic medium. Participation organic ligand molecules in the formation of solid Zn(II) і Cd(II).
Подобные документы
This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022Hydrothermal sol-gel synthesis of hexagonally ordered silicas using a hybrid template system is reported. Silicas were characterized by IR spectroscopy, X-ray diffraction techniques as well as electron microscopy. The hexagonal structure of MCM-41.
статья, добавлен 30.07.2016Rationale for the use of advanced technology for sewage treatment schemes dairies. Removal of insoluble organic matter by adding a flotation purification scheme. Using the immersed biofilter for a disk intensive degradation of organic pollutants.
статья, добавлен 13.08.2016Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021The article considers the state and prospects of production and use of biological fuel and its impact on ensuring energy security of both world agriculture and Ukraine. Determination of conditions for the growth of production and use of biofuels.
статья, добавлен 30.11.2017Development of a managed system architecture with the possibility of full-scale parametric optimization. Systematization of the architecture of the conversion system by the example of the technological process of liquid heating. Software designer EFFLI.
статья, добавлен 30.10.2016Висвітлено досвід застосування силіконових відтискних мас "Stomaflex solid" та "Zetaplus" для отримання зліпків з об’ємних слідів, які можуть бути виявлені на різноманітних об’єктах при огляді місця події. Порівняно застосовані в ході експериментів маси.
статья, добавлен 04.02.2019The results of experiments on the processing of low-grade Vyatka-Kama phosphate for alkaline phosphoric fertilizer using different industrial wastes. Available to get the thermal phosphate with the content of sulfate-soda mixture and organic sludge.
статья, добавлен 30.04.2018Innovative approaches that would improve the conceptual solutions of service robots and their operation in the application space. Involvement of robotics with different conceptual solutions for their mobility. Application of the wheel chassis principle.
статья, добавлен 28.08.2020The main objective is the operation of heating systems heat supply residential, public and industrial buildings and structures in order to provide municipal needs (heating, ventilation and hot water supply). Checking calculation of heat supply systems.
статья, добавлен 10.03.2019The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022А technology for manufacturing composite materials - flocculants-coagulants on aluminum-silicon and iron-silicon base. The evaluation of the effectiveness of the developed flocculants-coagulants for cleaning of natural water and industrial wastewater.
статья, добавлен 11.01.2018Using transmission electron microscopy methods the layer by layer analysis of the bulk hardened superior quality rails is carried out, phase state and defect substructure gradients are established. Character of changing of structure-phase states.
статья, добавлен 30.07.2016Development of methods for heat engineering tests of hydrodynamic pumps. Processes which occur in activator with water thermal hydrodynamic pump. Water flow speeds in a system. Gas bubbles are the product of centrifugal force effecting on carrier flow.
статья, добавлен 01.08.2016A resource-saving technology complex processing of highly mineralized mine waters of mining enterprises of the Kryvyi Rih iron ore basin has been developed. Of all the known methods of water desalination, the only method in this case is reverse osmosis.
статья, добавлен 26.12.2023The recent work on Micro Aerial Vehicles (MAV) at the Institute of Aerospace Systems. Basics of MAV Research. Flightmechanical simulation. Wind tunnel tests. Overall controller system structure. The inertial measurement unit. On-Board computer structure.
творческая работа, добавлен 18.01.2014Study of structure and properties of aluminum alloys treated with nanodispersed modifiers. Consideration of the classical theory of modification of melts. Creation of fine-grained structure of castings. Analysis of existing aluminum alloy modifiers.
статья, добавлен 21.04.2020A lightweight, environmentally friendly nanocomposite based on thermoplastic potato starch plasticized with glycerin is described. Adding cellulose nanofibers, improving the barrier properties of films due to the tortuous path for penetrating molecules.
статья, добавлен 14.04.2022Special supervisory control system responsible for the informative data acquisition about the current enterprise production and its control. The main SCADA. The general structure of SCADA. The Three main structure components modern SCADA-systems.
статья, добавлен 30.04.2019Анализ программы SolidWorks как мощного средства проектирования, ядра интегрированного комплекса автоматизации предприятия, с помощью которого осуществляется поддержка изделия на всех этапах жизненного цикла. Описание хода построения заданной детали.
контрольная работа, добавлен 10.04.2018The obstacle in the way of nanotechnologies is the lack of selective "scalpel and forceps", the instruments to operate with particles of size less than 10-9 meters, particularly with molecules and atoms. Atomic forceps and scalpel for nanotechnologies.
статья, добавлен 29.12.2023Methods of the equation of the cutting edge in the absolute coordinate system. A helix - a trace of movement of the cutting tool along the workpiece. Characteristics of the mathematical model of the formation of the microrelief surface when grinding.
статья, добавлен 06.05.2018Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016The study of the formation mechanism of flavonoid complex with aluminum ions. On the basis of the negative low Gibbs free energy values it found that chelation is a natural phenomenon. Determination of the antioxidant capacity of flavonoids stevia leaf.
статья, добавлен 30.01.2016Dynamic designer as a way to save time and cost of getting new products to market, and improving old ones without a huge investment in equipment. Using parametric solid models for to develop the form of the parts. Mechanical desktop to build prototypes.
презентация, добавлен 21.02.2014