A flat-parallel type photobioreactor design for sewage water treatment
Developing of a photobioreactor design for wastewater treatment in which the application of new connections reduces material consumption for the manufacture of transparent flexible tanks, reducing labor costs for installation and dismantling of tanks.
Подобные документы
Requirements to design and placement of dairy enterprises. The basic stages of development, preconditions and signs of emergency situations in such enterprises are provided. Schedule of trouble-free stop shop production of condensed canned milk.
статья, добавлен 13.08.2016The use of the boundary values of parameters of mould displacement of the earth's surface and refining the workings of the design scheme to predict the trajectory of sedimentation. Determination of empirical coefficients of mathematical equations.
статья, добавлен 30.07.2016Service robot - device which used for cutting the grass or vacuum cleaning. Repairing of damaged inner pipe wall. Substituted human in dangerous or monotonous works via using of robots. Cleaning brush module for dirties removing. Design of tracked robot.
статья, добавлен 28.08.2020Appointment, device and action of the turning machine. Types of lathes, depending on the application. Metal processing on machine tools, turning operations. The use of water energy to drive. The principle of operation of the hydroelectric station.
статья, добавлен 11.03.2019Rheology of high-viscosity marine fuel, temperature conditions of fuel preparation in ship power plant. The relationship between objects, environment and fuel quality of the fuel spray. Influence of variable electric fields for high-viscosity marine fuel.
статья, добавлен 28.09.2016Wind turbine concept with air duct. Influence of the exit area and entry area on aerodynamic characteristics. Designing a new model of Invelox. The need to install a curtain at the end of the air intake to change the direction of the air flow up, down.
статья, добавлен 08.03.2021Analyze existing installations for fire testing of building constructions both in Ukraine and abroad. Design a model of fire furnace was. Determination of the fire resistance of different constructive systems. Implementation of models of fire furnаces.
статья, добавлен 24.02.2016The model of the disperse material behavior under vibration in the hole of the dispenser based on the Navier-Stokes equations. The influence of the power factor on the movement of the product and the parameters of the hole on the vibrating dosing process.
статья, добавлен 14.09.2016The present study is a mathematical modeling aimed at the dynamic force analysis of printed circuit boards in order to eliminate dynamic stresses to an acceptable level and ensure the strength and reliability of the printed circuit board design.
статья, добавлен 02.06.2022Modeling and principle of operation positioner power consumption in the direct mode of automated management. Evaluation of the use of the corrected function decline in electricity consumption in the automated control system of technological process.
статья, добавлен 28.02.2016- 86. Investigation of properties of the constant technological track, which is used in bridge agriculture
Mechanical properties of soil traces of a permanent technological track and their influence on the traction and traction properties of a bridge agricultural machine of a new design. The research was conducted using the provisions of the tractor theory.
статья, добавлен 30.08.2022 Development and value of a robotic module, whose activity will be controlled based on the perception of the image obtained from a digital camera. Features and description of the process of creating an intelligent robotic module with a camera system.
статья, добавлен 28.08.2020The model of spatially distributed curing process of epoxy matrix polymeric composite. The model using the projections of Pareto points set on the 8-dimensional space of design variables. Сontrol synthesis for the closed mould curing of composite spar.
статья, добавлен 30.05.2017Analysis of the artistic and compositional characteristics of Ukrainian traditional embroidery and other works of decorative and applied art for decorating current clothing models in ethnostylistics. Designing author's models of modern clothing.
статья, добавлен 05.04.2023Influence of the type of machining and tool material on the structural state of the surface layer of steel during machining. Advantages of turning with composite 10 incisors compared to grinding. The occurrence of tensile stresses during metal processing.
статья, добавлен 14.09.2016Experimental improvement of the stability of the bolt connection of the technological and power modules of the new design of the modular machine-tractor unit. The new construction of the pivot connection of the technological module with the power module.
статья, добавлен 10.08.2022Analysis of requirements for electric-drive of mechanism of pulsed wire feed, and the benefits of using a special Brushless Direct Current electric-drive. Design of half-bridge circuit to regulate the strength of the current phase of the stator windings.
статья, добавлен 22.12.2016The main objective is the operation of heating systems heat supply residential, public and industrial buildings and structures in order to provide municipal needs (heating, ventilation and hot water supply). Checking calculation of heat supply systems.
статья, добавлен 10.03.2019Two sensor designs of metallic cylindrical resonator Coriolis vibratory gyroscope are analyzed in this work. Resonant frequencies computer modeling results are resented and on their basis gyroscope sensor geometrical parameters choice is validated.
статья, добавлен 14.09.2016Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.
статья, добавлен 30.07.2016The relation between the particles velocity and the deposition efficiency of material powders. A different approaches for calculating the critical deposition velocity. Computational fluid dynamics model. Critical particle velocity determination.
статья, добавлен 29.11.2016Grinding of loose materials in order to increase the contact surface, improving rheological activity for the intensification of a number of chemical and physical. Select the most efficient and economically viable method of grinding a hard material.
статья, добавлен 14.03.2019Research process to ensure the values of the endurance limit of the material details. The establishment of correlations between the modes of machining, quality of the surface layer and the fatigue limit. The characteristics of processed material.
статья, добавлен 14.09.2016Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
статья, добавлен 30.07.2016Using and improvement of qualities of products of oil processing. The process of obtain a water-soluble colloidal sulfur with seating stability, good solubility in water, high biological activity. Selection of conditions to receiving polymeric products.
статья, добавлен 11.03.2019