Polymer nanocomposites by QED induced EUV cross-linking
Nanocomposites comprising ray in a polymer. The reflection mechanical properties material. Increasing the polymer properties by forming the interphase. Obtaining curves of stress-strain states of macroscopic samples irradiated polymer materials.
Подобные документы
These developments are devoted to the use of sol-gel processes in various branches of science and technology. Based on inorganic ion-exchange materials, a technology was developed to extract lithium from natural brines, which are poor in lithium content.
статья, добавлен 31.10.2017Comparative analysis of the effect of chemical compounds on the process of forming an electric arc and the conditions for its combustion.Metal transfer in the interelectrode gap under experimental conditions. Specific power of electric arc discharge.
статья, добавлен 29.09.2016Characteristics of jet fuels: general information and properties. Fractional composition: initial boiling point and 10% fuel distillation temperature, 50% fuel distillation temperature and temperature of 90 % fuel distillation (t90) and dry point.
контрольная работа, добавлен 06.12.2014Types of tool materials: from high-carbon steel to ceramics and diamonds, and their use as cutting tools in the modern metal industry. Cutting tool and its characteristics: hardness, strength. Achieving an acceptable tool life before replacing it.
статья, добавлен 26.04.2019Evaluation of the technical system and its subsequent use for decision-making to ensure complex technical systems with appropriate quality of work. The characteristics and specificity of the model changes performance States based on the Markov chain.
статья, добавлен 29.01.2016Gathering of materials about a petroleum industry in a museum creates favorable conditions for their protection. The assemblage of materials is stored In a museum about the factory "Brothers Nobel". The oil extracted by brothers Nobel in 1894-1903.
статья, добавлен 03.03.2018Solution of the problem of the theory of elasticity for a composite in the form of a half-space with a thick-walled round cylindrical tube and a layer rigidly attached to the surface of the half-space. Assessment of the stress state of the composite.
статья, добавлен 26.02.2021Establishment of rational technological modes of processing various types of meat raw materials by needle injection on a multi-needle brine injector. Improvement of technologies and types of specialized equipment for injecting meat raw materials.
статья, добавлен 20.07.2024Substantiation of expediency of enzymatic processing of canola meal for increasing its nutritional value. The role of enzymatic hydrolysis in reducing the amount of cellulose and hemicelluloses, increasing the amount of free phosphorus in rapeseed rape.
статья, добавлен 30.04.2018A method of determining the effective longitudinal elastic modulus for the composite material in the problem of longitudinal tensile composite. Unidirectional composite material with a hexagonal arrangement of fibers. The effective elastic modulus.
статья, добавлен 27.09.2016The types of dosimeters: silicon-diode detectors, diamond detectors, liquid ion chambers and radiographic films. The spatial resolution as a key feature for next-generation dosimeters. Results using one layer of DOSIORT. Isodose curves in the test.
статья, добавлен 12.10.2013Examines the role of artificial intelligence, sensors, and other technological innovations in shaping and optimizing logistics processes in the United States. There are many new opportunities to innovate and improve efficiency and customer satisfaction.
статья, добавлен 21.03.2024Description the current state of the use of natural artificial sweeteners, especially glucose-fructose syrup in the food industry. Methods of determination of the consistency of experimental samples by the method of gravitational penetration is describe.
статья, добавлен 23.03.2018Defining and analysis the essence of robot is an automatic device, which has a manipulator – mechanical analogue of human hand, and manipulator control system. Consideration and characteristic of the structural features model of domestic robot–helper.
статья, добавлен 29.01.2016To separate simultaneous removal of mechanical impurities and water - the main tasks of filters. Analysis of the graphical representation of the piping system for pumping fuel and necessary equipment for the storage and dispensing of fuel operations.
курсовая работа, добавлен 29.03.2018Analysis of a mathematical model to determine the transient modes of rotary kilns, drying drums and mills taking into account electromagnetic processes in the induction motor. Mechanical vibrations of the elements of the drive mechanism, long metal body.
статья, добавлен 14.09.2016The problem of fuzzy multicriterial analysis of local energy conversion systems. Construction of training samples for artificial neural networks. Application of multiagent calculating models. Transition from vectorial criterion to a scalar combination.
статья, добавлен 28.08.2016Dynamic designer as a way to save time and cost of getting new products to market, and improving old ones without a huge investment in equipment. Using parametric solid models for to develop the form of the parts. Mechanical desktop to build prototypes.
презентация, добавлен 21.02.2014The roller of the belt as the most important parts of the conveyor, being subjected to continuous stress both during operation and in stopping periods. Causes and weight percentage of failures due to fatigue. Sealing system with simple labyrinth.
статья, добавлен 27.12.2016Transit of natural gas along the territory of Ukraine to the countries of the Western and Central Europe. Main resons of the loss of pipeline efficiency. Necessity for studying of the operation modes of the gas transport system during underloading.
статья, добавлен 01.12.2017The main stages of the automatic assembly of cylinder connection. The structural elements of the flexible automated production. Prospect for the automation of machine building production. The main types of heat exchange in technological systems.
контрольная работа, добавлен 05.04.2016Mechanical tests of with various hydrogen concentrations before and after the hydride reorientation tests were performed. Hydrogen pickup measurements in zirconium alloys: relation to oxidation kinetics. Hydride microstructure in the dummy claddings.
статья, добавлен 30.05.2021Cylinder shaped parts – one of the mostly used in printing presses. A new technology of strengthening and recovery of details based on vibration roll burnishing is offered in the article. Experimental work and scientific conclusions are described.
статья, добавлен 29.07.2016Technological solutions that allow us to solve the problem of premature wear of the printing machines. A new technology of strengthening and recovery of details based on vibration roll burnishing is offered. Experimental work and scientific conclusions.
статья, добавлен 29.07.2016Improving the method of dynamic analysis of mechanical systems dynamic factors dynamic model which can be represented by three-mass system of row with the first driving mass with prestressing elastic drive connections. Finding the dynamic coefficients.
статья, добавлен 30.07.2016