Positron trapping processes in temperature-sensitive thick-film structures
Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
Подобные документы
- 1. Structural and electro-physical properties of heterogenous film materials based on refractory metals
Structural phase composition analysis of heterogenous film materials based on refractory metals is presented. A thermal activity nature of their conductivity was determined. Of investigation were estimated thermal resistance coefficient and energy.
статья, добавлен 30.07.2016 The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).
статья, добавлен 07.09.2022Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.
статья, добавлен 02.06.2014The analysis of fire-resistant intumescent coatings, which are currently used in Ukraine and abroad, as well as prospects for the development of new intumescent coatings with improved properties, is carried out. Methods of fireproofing metal structures.
статья, добавлен 13.11.2023History of the appearance of ceramics. Ceramic products, types of ceramics. Features of technology of production of ceramic products. Ceramics of the Urals. The Perm State Arts Gallery is big Museums in the Ural region. Changes to the "Willow Pattern".
реферат, добавлен 20.03.2015Study of field distribution in structures such as a gold lattice, a graphene layer, and a silicon substrate. Conditions of maximum electromagnetic field distribution by these structures for the purpose of using them in photonics and electronics devices.
статья, добавлен 24.02.2024Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.
статья, добавлен 30.07.2016The use of metallic pigments with features of the geometry of the surface of printing materials. Functionality of the "Materials Editor" program and a group of parameters of geometric surface structures. Assessment of surface structures in the 3D system.
статья, добавлен 12.06.2023Application and classification of construction materials. Definition of key indicators affecting the choice of material. Alloys based on copper and aluminum. Properties, applications and benefits of innovative materials, thermosetting plastics, ceramics.
статья, добавлен 10.03.2019In the article, high-temperature superconductivity is investigated and studied, and its promising paths are shown. One of these methods is the application of extreme pressures. In addition to hydrogen-containing materials, the article reflects the names.
статья, добавлен 10.10.2024Characteristics of jet fuels: general information and properties. Fractional composition: initial boiling point and 10% fuel distillation temperature, 50% fuel distillation temperature and temperature of 90 % fuel distillation (t90) and dry point.
контрольная работа, добавлен 06.12.2014Investigation of adhesive compositions based on polychloroprene for the adhesion of rubber soles to the tips of the skin. Determination of the adhesion strength of the adhesive film when stretched as the hardener content of the adhesive is increased.
статья, добавлен 21.12.2016Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.
презентация, добавлен 20.10.2014Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
статья, добавлен 21.12.2016A modern house built using materials that "smell of the past, but strive for the future." The use of mechanical ventilation with dehumidification, radiant floor, photovoltaic panels with energy storage and heat pump. Creating a comfortable temperature.
статья, добавлен 04.10.2021Examines the role of artificial intelligence, sensors, and other technological innovations in shaping and optimizing logistics processes in the United States. There are many new opportunities to innovate and improve efficiency and customer satisfaction.
статья, добавлен 21.03.2024This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022Solution of the problem of the theory of elasticity for a composite in the form of a half-space with a thick-walled round cylindrical tube and a layer rigidly attached to the surface of the half-space. Assessment of the stress state of the composite.
статья, добавлен 26.02.2021Characteristics of mathematical model of dynamic processes that occur in frictional hardening of flat surfaces of machine parts with use of the tool with the cut transverse grooves on its working parts. Cyclic circuit of the machine’s oscillations.
статья, добавлен 14.09.2016Surface-polymer flooding (the so-called micellar polymer flow) as a potentially advanced oil recovery technology is more effective than polymer flooding. Surface-active interaction and compatibility of the polymer. Distinctions, drawbacks of the method.
статья, добавлен 06.05.2018Research foaming effect, which can be the addition of zeolite in the asphalt mixture that causes the of the asphalt, better adhesion and ability lehkoukladalnist mixture. Characteristics of adsorbed water allocation as a function of time and temperature.
статья, добавлен 24.02.2016The conductive nanocomposite films on the basis of reactionary copolymers received. The threshold of their percolation is determined. It was shown that its value depends on the size of specific surface of nanotubes and conditions of composite obtaining.
статья, добавлен 23.09.2016The model of spatially distributed curing process of epoxy matrix polymeric composite. The model using the projections of Pareto points set on the 8-dimensional space of design variables. Сontrol synthesis for the closed mould curing of composite spar.
статья, добавлен 30.05.2017