Principles of calculation of piezoelectric elements with surfaces partial covering by electrodes
Description of stress-strain state and transfer characteristics of piezoelectric elements with partial surfaces electrogalvanism. The power method of the analysis of the physical condition of the piezoelectric elements in the mode of forced oscillations.
Подобные документы
An analysis of demand in the semiconductor industry, covering all three phases of materials: gases, liquids and solids. The study of the peculiarities of application for solids which includes a semiconductor substrate, metal, dielectric, an organic film.
книга, добавлен 14.03.2014Consideration the processes taking place in the metal pipe during prolonged use. Studing the complex physical and mechanical properties to assess the resistance to the destruction of the metal in the environment closest to the operating conditions.
статья, добавлен 30.01.2016Peculiarities of application of mathematical apparatus for the calculation of point Baluba-Naidysh to develop the technology for scanning of the light openings of different configurations. Method of determining point equations for parabolic window.
статья, добавлен 07.12.2016Comparative analysis of the effect of chemical compounds on the process of forming an electric arc and the conditions for its combustion.Metal transfer in the interelectrode gap under experimental conditions. Specific power of electric arc discharge.
статья, добавлен 29.09.2016In this study, porous Ti-Nb-Zr biomaterial which is not included poison elements was successfully fabricated by powder metallurgy using space holder of NH4HCO3 and foaming agent of TiH2. Biocompatibility of porous Ti-Nb-Zr alloys is similar to Ti-6Al-4V.
статья, добавлен 30.07.2016Description the current state of the use of natural artificial sweeteners, especially glucose-fructose syrup in the food industry. Methods of determination of the consistency of experimental samples by the method of gravitational penetration is describe.
статья, добавлен 23.03.2018Proposes a method to increase information content in studying frequency properties of automatic control systems typical dynamic links based on representation of the link transfer functions in the form of graphs. Examples of separate links are provided.
статья, добавлен 25.01.2022Scientific justification for automated control method of optimal charge of pebble mill operating in series with a magnetic separator in the second stage of crushing in magnetic separating plants that process on iron ores with varying physical properties.
статья, добавлен 23.03.2016Analysis of the main causes of destruction of adhesive joints. Structural and technological stress concentrators, because of which cracks develop during operation. General characteristics of the resistance of adhesive bonding to failure at all stages.
статья, добавлен 30.04.2018Grinding of loose materials in order to increase the contact surface, improving rheological activity for the intensification of a number of chemical and physical. Select the most efficient and economically viable method of grinding a hard material.
статья, добавлен 14.03.2019The flexural and compressive strength of mortar by partial replacement of cement with Nano-ZnO particles has been studied. The results showed that the flexural and compressive strength of the cement mortars with ZnO were higher than pure cement mortar.
статья, добавлен 12.06.2018Nanocomposites comprising ray in a polymer. The reflection mechanical properties material. Increasing the polymer properties by forming the interphase. Obtaining curves of stress-strain states of macroscopic samples irradiated polymer materials.
статья, добавлен 30.07.2016The sustained propagation of combustion fronts in porous media is as a condition for the success of in situ combustion for oil recovery. The analysis of a method for modeling the propagation of combustion fronts in porous media. Problem of loss of a heat.
статья, добавлен 20.05.2013Comprehensive analysis of allelic protein variants suitable for use in bakery products made from Iraqi wheat varieties, as well as biological evaluation of these varieties using a genetic source using a general method of qualitative grain selection.
статья, добавлен 18.03.2021General characteristics of gas motor fuel. The current state of the market of gas motor fuel and infrastructure for use of CNG. Problems in the development of the NGV market and their solutions. Analysis of interest in the use of natural gaseous fuels.
статья, добавлен 10.03.2019Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022The types of mechanisms turning and folding blades used for power control and stabilization of frequency of rotation of the wind turbines. The dependence of the displacements of sliders and centrifugal weights on the angle of rotation of the blade.
статья, добавлен 14.09.2016Transit of natural gas along the territory of Ukraine to the countries of the Western and Central Europe. Main resons of the loss of pipeline efficiency. Necessity for studying of the operation modes of the gas transport system during underloading.
статья, добавлен 01.12.2017The system of rest is energy-saving, with power supply from alternative energy sources intended for complex recovery of an organism in house conditions. Determine the effectiveness of panel modules on the level of stress. Application panel "Ananta 2016".
статья, добавлен 19.12.2017Structure of engineering systems. A description of the statistical procedures recommended for use in reliability analysis "related" components. The choice of an appropriate probabilistic model for predicting the reliability of components of one's sibling.
статья, добавлен 14.09.2016Familiarity with the basic method of identification of defects of the drive with induction motor using wavelet transform for the test signals. Analysis of a neural network model converted to the next subsequent stages on the basis of the algorithm.
статья, добавлен 28.08.2016Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016Algorithm for determination of transfer function models for transient processes from noisy data with continued fraction approximations is proposed. Presented method allows to solve the stability problem of low-order continued fraction approximations.
статья, добавлен 26.06.2016Tissue Paper and its properties. Space and weight characteristics. Carrier and type of aircraft for transportation. Limitations by sizes, weight and loading on the floor. Calculation of number of bags that we can put into one box. Manipulation signs.
курсовая работа, добавлен 16.12.2013Consideration and characteristics of the scheme double-point wheel-rail interaction. Familiarization with the erosive wearing. Definition of the dependence of the coefficient of adhesion on the temperature. Analysis of sand system of the locomotive.
статья, добавлен 26.09.2016