Structural features amorphous-like coatings AlN-TiB2(TiSi2) after annealing (900, 1300 degrees) and their impact on physical and mechanical properties changes
The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
Подобные документы
Scientific justification for automated control method of optimal charge of pebble mill operating in series with a magnetic separator in the second stage of crushing in magnetic separating plants that process on iron ores with varying physical properties.
статья, добавлен 23.03.2016Features of the application of methods for monitoring the state of the wooden structure in the production flow. Ways to optimize the prediction of wood properties using various NDE methods. The combination of methods for effective quality control of wood.
статья, добавлен 29.11.2018The main criteria for the quality of a pile coating, obtained by electro-floating. Experimental data obtained on a sample of nylon pile used in applying pile coatings by electro-floating method, which prove the efficiency of the proposed method.
статья, добавлен 30.08.2020Impact indicators coal shiites in the properties of the resulting coke. Coking process with the help of passive experiment. Effect of changes in the number of components of the coal charge on the quality of the coke at various technologies of sintering.
статья, добавлен 29.07.2016A modern house built using materials that "smell of the past, but strive for the future." The use of mechanical ventilation with dehumidification, radiant floor, photovoltaic panels with energy storage and heat pump. Creating a comfortable temperature.
статья, добавлен 04.10.2021The purpose of research was isolation and identification of Enterococcus species from raw milk and traditional dairy products and their biochemical properties were examined. Some biochemical and technological properties of the strains were determined.
статья, добавлен 28.05.2022Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016Features of defining the basic principles of the formation of the "unisex" style direction as a design practice in clothing design. Analysis of ways to identify the design and artistic compositional properties of the development of a costume collection.
статья, добавлен 25.04.2022Characteristics of jet fuels: general information and properties. Fractional composition: initial boiling point and 10% fuel distillation temperature, 50% fuel distillation temperature and temperature of 90 % fuel distillation (t90) and dry point.
контрольная работа, добавлен 06.12.2014Comparison of thermal insulation properties of Sakhabult products with products of other manufacturers. Manufacturing of a dummy for monitoring the temperature difference inside sleeping bags and outerwear from natural fur of fur animals, deer and horses.
статья, добавлен 01.04.2021Integrating lignin with synthetic plastics - an innovative approach in the development of sustainable polymers. Nanofibers with antimicrobial properties - one of the innovative materials that can be effectively used in the current pandemic situation.
статья, добавлен 13.04.2022The surfactants have been objects of studies all over the world. Development of approach to surfactants with controllable structure and properties based on the natural raw materials applicable for cosmetics production as dispersed systems stabilizers.
статья, добавлен 23.09.2016Characteristics of distillation devices used in the production of alcohol in the XIX-XX centuries. Provisions of mechanical, microbiological, physicochemical, physiological theory of fermentation. The role of L. Pasteur in the study of alcohol production.
статья, добавлен 30.01.2022- 64. The influence of modified methyl cellulose on the main properties of expanding cementing slurries
The effect of modified methylcellulose on the main properties of expanding cementing slurries. When cementing low-temperature wells, expanding cementing slurries based on a mixture of Portland cement (70-75% PCT-I) and gypsum alumina cement (30-25% GAC).
статья, добавлен 04.09.2024 The investigation is focused on the evaluation of residual stresses resulting from cold deformation and welding in candidate target structural materials such as martensitic Alloys EP-823 and HT-9, and also an austenitic Type 304L stainless steel.
магистерская работа, добавлен 14.02.2013Searching for cheap and effective corrosion protection methods. Research on the possibility of using "green inhibitors" as anti-corrosion measures. Characterization of the properties of the complex of inhibitors, alkaloids and tannins included in plants.
статья, добавлен 04.07.2022Determination of the design principles of shaping in the design of fur garments that provide innovative character of the design activities and high level of artistic and stylistic properties of the projected objects. Principles of composition for design.
статья, добавлен 31.05.2022The main production methods jet fuels rocket engines. Prospects for the use of various raw materials to produce jet fuels in the context of limited energy resources. The impact of processing production and use of aviation fuels on the environment.
статья, добавлен 23.02.2016In this study, porous Ti-Nb-Zr biomaterial which is not included poison elements was successfully fabricated by powder metallurgy using space holder of NH4HCO3 and foaming agent of TiH2. Biocompatibility of porous Ti-Nb-Zr alloys is similar to Ti-6Al-4V.
статья, добавлен 30.07.2016The comparative analysis of the microstructure, phase and chemical composition of the experimental alloys of the Fe-W type with the standardized grade ferrotungsten. The feasibility of using Fe-W for the manufacture high tungsten materials based on iron.
статья, добавлен 30.01.2016- 71. Polyphenol composition and technological characteristics of the coloured whey from various origin
The purpose of this scientific work was to determine the polyphenolic composition and technological characteristics of colored whey of various origins, obtained by coagulation of milk proteins with traditional berry raw materials and wild herbs.
статья, добавлен 10.06.2022 Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.
статья, добавлен 30.07.2016The conductive nanocomposite films based on functional reactive copolymers and bifunctional alcohols. Creation multiwall carbon nanotubes. Dependence properties of the nanocomposites from the specific composite composition and obtaining conditions.
статья, добавлен 30.07.2016The study of structural changes during hot deformation metal during controlled rolling. The influence of preheating temperature and deformation degree on the size and shape of austenite grains. The definition of the polygonal structure of the austenite.
статья, добавлен 30.01.2017Improving matching techniques constructional and technological parameters of the installation with the modes of its work taking into account the features of the resonator. The changes in the dielectric parameters of raw material during the heat treatment.
автореферат, добавлен 30.04.2018