Detection of stresses induced by heat flux in a solid by using a photoelastic microscope
The advantages of the method of modulation polarimetry applied to the sample in the quartz glass plate to identify its internal thermal stresses caused by the spreading of the thermal wave. The solution to the problem of non-stationary thermoelasticity.
Подобные документы
Determination of thermal conditions of vacuum-arc plasma sources cathodes. Investigation of the thermal field of a stationary cathode surfaces, the cathodes different geometry and heat flux. A period of time for cathodes with different types of cooling.
статья, добавлен 30.07.2016Solution of the problem of non-stationary anisotropic thermal conductivity in the software "AnisotropicHeatTransfer3D". Analysis of the distribution of the temperature field in an anisotropic solid at a given time by means of raster and vector graphics.
статья, добавлен 05.09.2024The essence of the method of a round flat constant power probe used to determine the thermal characteristics of solids. Formulas for calculating thermal conductivity and thermal diffusivity. Measuring equipment, analysis of experimental results.
статья, добавлен 30.05.2021Investigation of reverse effects in non-residential buildings after thermal modernization. Study of actual and calculated indicators of heat consumption before and after thermal modernization. Development of a technique for determining reverse effects.
статья, добавлен 01.12.2017Nonlinear regimes of 1D parametric instabilities of long-wave plasma waves are considered for the cases when the average plasma field energy density is less or greater than the plasma thermal energy. The evolution of ion energy distribution is studied.
статья, добавлен 27.07.2016The efficiency of a thermal power cycle. Use of waste heat for process or central heating. Ways to increase the overall efficiency of the power plant. A combination of different thermodynamic cycles in a combined cycle. Once-through cooling systems.
статья, добавлен 20.02.2019The overall frame and principal steps of complex numerical modelling of thermal processes in power boiler furnaces on pulverised coal with tangential disposition of the burners. The methodology for creation of three-dimensional models of boiler furnaces.
статья, добавлен 02.02.2019Description of the method for solving the one-dimensional stationary Schrodinger equation. Fourier Transformation of the wave equation. The discrete energy levels. Analysis based on a quantum-well device. The functional dependence of the potential well.
статья, добавлен 30.07.2016A consideration of process for impulse heat treatment of a silicon surface. The studying the thermal conductivity of a silicon powder and a polycrystalline wafer molded from powdered stock. Defining and comparing compounders with monocrystalline silicon.
статья, добавлен 29.07.2014Analysis of thermal stability, features of structure, physical-mechanical descriptions of thin wearproof coverages on the basis of diborides of transitional metals, under act of high temperatures. Studding the optimization model of cutting process.
статья, добавлен 30.07.2016Aimed at revealing of the draft mechanisms at the thermal power plants, which serve for continuous air supply to the boiler furnace. It is necessary for combustion process of fuel and removal of combustion products from the boiler into atmosphere.
статья, добавлен 25.11.2021Analysis of physical and numerical modeling of an electron emission and transport processes for different electron-optical energy conversion systems with nanostructured surface electron sources. Review of energy conversion processes with high efficiency.
статья, добавлен 30.07.2016Establishing the regularities of the thermal factor and radiation processing influence on the structure of ion-plasma coatings received by magnetron sputtering of quasi-binary WC-TiC system. Creation and use in practice ion-plasma multilayer coatings.
статья, добавлен 30.07.2016Description of examined toolmakers microscope. Printed circuits boards’inspection via using of microscope. Calibration of optical toolmakers microscope, calibration ruler and MultiScale Micrometer for Microscope. Basic parts of Toolmakers microscope.
статья, добавлен 28.08.2020- 15. Near-field coherent effects at thermal microwave radiation receiving on coupled linear wire antennas
A theory of electromagnetic wave multiple scattering by ensemble of dielectric and conductive bodies, with describing the excited currents inside bodies of electric field tensor T-scattering operator. A system of equations for currents on surfaces.
статья, добавлен 04.11.2018 The review for different devices: Infrared sensor arrays for thermal imaging on active Si read-out chips, resonant cavity enhanced IR detectors, quantum well lasers on Si substrates and "wavelength transformers", structures operated in sub-threshold.
статья, добавлен 28.06.2013Analytical comparison of the accuracy of numerical solutions obtained by the FDTD method and the Godunov method in solving telegraph equations. The advantages of the design scheme based on the Godunov method in the analysis of dynamic modes in long lines.
статья, добавлен 02.02.2019The nonlinearly damped semilinear wave equation and a thermoelastic Mindlin-Timoshenko plate system with nonlinear viscous damping. The upper semi-continuity of the attractor with respect to the parameters related to the coupling terms and the shear.
статья, добавлен 30.10.2016Features of plastic forming (micro creep) of a wide class of fresh-quenched metallic glass (mg) at room temperature and under the action of tensile stresses. The increase in the volume fraction of crystallization centers in the amorphous matrix.
статья, добавлен 29.06.2016Calculation of the average neutron energy. The converter of thermal neutrons. The reactor core. Radiography and tomography tumor contour. Project progress MEDAPP. Irradiation of the cell cultures. Determination of biological efficacy of a new beam.
статья, добавлен 06.11.2013Induced transitions between a limit cycle and the state of the rest of the van der Pol has a threshold and disappears at rest. The threshold value is directly proportional to the product of the energy of oscillation and the coefficient of friction.
статья, добавлен 04.10.2014Development of model for prestellar clouds. Thermal and chemical evolution. Effects of cosmic microwave background radiation. Role of metals in dust phases: a minimum model for metallicity effects. Reduced chemical model for low-metallicity clouds.
статья, добавлен 13.11.2013The shear modulus of fluids and their dependence on the degree of purity of the piezoelectric surface. The essence acoustic resonance method using a piezoelectric quartz resonator. The main criteria for the status of the static coefficient of friction.
статья, добавлен 22.03.2016Classification of power plants: working on fossil fuel, nuclear, thermal and coal. Steam turbine installations and the use in them of the dynamic pressure created by the expansion of steam to rotate the turbine. Reciprocating internal combustion engines
статья, добавлен 20.02.2019Dielectric loss, which characterizes the conversion of electrical energy into thermal energy as electrical properties of dielectrics. Loss mechanisms and their contribution to the conductivity of the dielectric materials of ultra-high frequencies.
статья, добавлен 26.06.2016