The investigation of fire extinguishing ability of the powder materials by extended extinguishing and suppression of explosions of gas-airmixtures
Determination explosion ability of fine-dispersion substances as slaked lime, standard fire extinguishing powder containing ammophos, sludge from the chemical unit of the cold rolling plant of the steel sheet containing iron oxide, dolomite dust.
Подобные документы
The features of production of Fe:MgAl2O4 nanopowders by evaporation of targets made from a oxide mixture by repetitively pulsed laser radiation. Differences in the phase compositions of the solid powder substances. A rate of the cooling the ytterbium.
статья, добавлен 18.09.2018It has been shown that well crystallized cobalt- and iron-containing spinel ferrites are formed at neutral pH value of aqueous medium. The contact of steel surface with alkaline medium results in formation of weakly crystallized iron oxyhydroxides.
статья, добавлен 04.04.2014The kinetic of origin and transformation of the Fe(II)–Fe(III) LDH structures on the steel electrodes surface contacting with FeSO4 and Fe2(SO4)3 dispersion medium of the air oxygen into the system was studied. X-ray diffraction method of investigation.
автореферат, добавлен 02.04.2014Justification of the qualitative composition of excipients for encapsulation in the production of "Apised" capsules – a new original medicine, created on the basis of: powder of natural honey and medicinal plant raw materials (hop cones, lavender).
статья, добавлен 29.10.2016The use of ethylene oxide (EO) as a chemical intermediate. A suggested process flow diagram Ethylene Oxide Process. Process Details: feed, effluent, recycle streams, deliverables and grading. Economic analysis the equivalent annual operating cost.
статья, добавлен 26.11.2014- 6. Preparation and characterization of iron complexes based on polysaccharides from agaricus bisporus
The possibility of obtaining soluble iron complexes based on polysaccharides, Agaricus bisporus, maximum yields of samples. Nanoscale polycyclic complexes of ferric hydroxide and mushroom polysaccharides. The ability to use concentrated solutions.
статья, добавлен 27.07.2016 Consideration of the results of x-ray diffraction of the considered chemical compounds. Structural properties of the films of magnesium oxide. Substantiation of optimum parameters of temperature of synthesis of organic and many inorganic compounds.
статья, добавлен 30.07.2016Consideration in this study, multi-chamber detonation sprayer was applied for deposition of NiCoCrAlY powder coatings on nickel base superalloy JS6U. The coating microstructures and phase compositions were characterized using SEM, OM and XRD techniques.
статья, добавлен 30.07.2016The use of block copolymers on the basis of oxides of ethylene and propylene as demulsifiers of oil emulsions. Determination of the dependence of their physico-chemical properties from the content oxyethylene and oxypropylene groups in the molecule.
статья, добавлен 23.02.2016Obtaining JBW zeolite from hydrogels under hydrothermal conditions by alkaline reaction using NaOH as an activating agent. Orthorhombic space group Pmc21 with unit cell parameters, X-ray powder diffraction. Comprehensive study of the synthetic zeotype.
статья, добавлен 18.01.2021Chemical hazards and toxic substances pose a wide range of health hazards (such as irritation, sensitization, and carcinogenicity) and physical hazards (such as flammability, corrosion, and explosibility). Explosives. Gases. Flammable liquids, solids.
презентация, добавлен 18.09.2016The use of scanning electron microscopy to study the reactivity of iron in yellow color with different iron concentrations. Substantiation of the possibility of applying the archeometric approach in studies of the chemical corrosion of ancient documents.
статья, добавлен 21.12.2016Chemical identification of polymer additives and its significance for links in the plastics supply chain. The effect of additives on the properties of materials and on the cost of production of polymers. Quantitative determination of polymer additives.
статья, добавлен 10.03.2019Sulfur - substance that be in the most kinds of steel. Research of influence of ladle furnace reductants in the desulfurization process. Control ultra-low sulfur steel. The chemical degassing in the ladle furnace-vacuum. Maintaining a low sulfur content.
статья, добавлен 30.01.2016Analysis of the method of synthesis of new materials with carboxylic acid groups, based on the template method, was developed. The efficiency of this methodology was demonstrated by powder x-ray diffraction, infrared spectroscopy and thermal analysis.
статья, добавлен 02.04.2014The study of physico-chemical properties of modified forms of natural biopolymers – carboxymethyl cellulose and xanthan gums, their ability to film formation water-soluble polymeric compositions and the influence on growth and productivity of crops.
статья, добавлен 23.02.2016The problem of identification of paints according to the commodity nomenclature of foreign economic activity. Chemical composition are received, structures, and other organoleptic, physical and chemical parameters of production of paints and varnishes.
статья, добавлен 10.03.2018Isomeric aminobenzoic acid – an important chemical product of organic synthesis used in the production of synthetic dyes, medicinal and aromatic substances, wines, pesticides. Investigation the reaction of the oxidization of 2- and 3-aminotoluenes.
статья, добавлен 22.03.2016Homogeneous precipitation synthesis of nanocomposites - activated carbon – zirconium(IV) oxide. Characterization of samples by x-ray diffraction analysis and electron microscopy. Sorption properties and the degree of extraction of phosphate ions.
статья, добавлен 23.02.2016The cycle of sanitary and chemical investigations of various artificial leathers and the polymer composition. The possibility of conducting direct stabilization of artificial leathers. The hygienic evaluation of polymers and polymer-containing materials.
статья, добавлен 29.01.2016Chemical compositions of Portland cement. Possibility of using waste glass in building technology. A structure alkaline compounds. Study of fine-grinded glass. Influence additives on the induction and post-induction periods of Portland cement hardening.
статья, добавлен 23.02.2016A controlling the morphology of zinc hydroxide and zinc oxide at room temperature without using any template or surface ligand. Identify the precipitated materials. Dependence of ZnO morphology on Zn2+ concentration. Scanning electron microscopy of zinc.
статья, добавлен 30.07.2016The efficiency of using softened water in the removal of dissolved oxygen and iron ions has been determined. The dependence of the efficiency in the processes of the deoxygenation and iron removal of water on the filtering speed through the redox filter.
статья, добавлен 26.02.2021Proving that MBT fine fraction is fit-to-use as functional material for methane degradation layer. Confirmation of the methane degradation efficiency in fine MBT fraction is important from the ecological point of view. The use of a fine fraction.
статья, добавлен 11.07.2022- 25. Growth of zinc oxide porous films via electrochemical anodization using glycerol based electrolyte
Formation of the porous structure of zinc oxide. Morphological properties of anodized films. Methods of diffraction of X-rays and scanning electron microscopy. Analysis of electrochemical anodizing of zinc oxide in electrolyte based on glycerol.
статья, добавлен 30.08.2016