The influence mechanism of ferrite grain size on strength stress at the fatigue of low-carbon steel
The study of the properties of low carbon steel. Methods of cold plastic deformation. The rationale for the recommended annealing temperature. Is the microstructure of low-carbon metal. The study of the conditions of plastic deformation of ferrite.
Подобные документы
Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".
статья, добавлен 06.05.2018Substantiation of expediency of enzymatic processing of canola meal for increasing its nutritional value. The role of enzymatic hydrolysis in reducing the amount of cellulose and hemicelluloses, increasing the amount of free phosphorus in rapeseed rape.
статья, добавлен 30.04.2018Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016Transit of natural gas along the territory of Ukraine to the countries of the Western and Central Europe. Main resons of the loss of pipeline efficiency. Necessity for studying of the operation modes of the gas transport system during underloading.
статья, добавлен 01.12.2017- 105. Strength characteristics of a composite laminate with a center hole under biaxial tensile loading
The developing of a useful model dealing directly with biaxial loading of composite plates with stress concentrations, which can be called progressive damage model. Progressive damage model was utilized to analyze the damage evolution of specimen.
статья, добавлен 18.01.2021 A modern house built using materials that "smell of the past, but strive for the future." The use of mechanical ventilation with dehumidification, radiant floor, photovoltaic panels with energy storage and heat pump. Creating a comfortable temperature.
статья, добавлен 04.10.2021Study of field distribution in structures such as a gold lattice, a graphene layer, and a silicon substrate. Conditions of maximum electromagnetic field distribution by these structures for the purpose of using them in photonics and electronics devices.
статья, добавлен 24.02.2024The main factors of physical phenomena that accompany the process of power explosive effect for the development of new processes of metal processing. Industrial testing of facing technology by explosion of artificial surfaces of complex configuration.
статья, добавлен 19.02.2019Reduce costs and increase durability of threaded connections. The relationship between the thermal treatment and the strength of the threaded connection. Compare the minimum tightening hermetic threaded connections three types of anaerobic adhesives.
статья, добавлен 28.09.2016Grinding machine and its use for finishing workpieces, which must demonstrate high surface quality and high accuracy of shapes and sizes. Roughing operations in which grinding removes large volumes of metal fairly quickly. The components of machine.
статья, добавлен 10.03.2019Consideration of the problems of energy conservation and management of production costs at metallurgical enterprises. The necessity of carrying out an energy-resource-saving policy of metal producers has been substantiated; directions of energy saving.
статья, добавлен 30.09.2021Obtaining prototypes of hemp oil by cold pressing. Determination of mass fraction of moisture оil content measurement. Indicators of seeds' quality during long storage. Yield and quality indicators of by-products obtained in the production of hemp oil.
статья, добавлен 24.06.2022Investigation of adhesive compositions based on polychloroprene for the adhesion of rubber soles to the tips of the skin. Determination of the adhesion strength of the adhesive film when stretched as the hardener content of the adhesive is increased.
статья, добавлен 21.12.2016- 114. Structural and electro-physical properties of heterogenous film materials based on refractory metals
Structural phase composition analysis of heterogenous film materials based on refractory metals is presented. A thermal activity nature of their conductivity was determined. Of investigation were estimated thermal resistance coefficient and energy.
статья, добавлен 30.07.2016 The system of rest is energy-saving, with power supply from alternative energy sources intended for complex recovery of an organism in house conditions. Determine the effectiveness of panel modules on the level of stress. Application panel "Ananta 2016".
статья, добавлен 19.12.2017Comparison of two non-conventional processes which are laser and photochemical machining. The formation of complex shapes in metal sheets. Chemical etching of the material for the manufacture of the desired finished product by a controlled corrosion.
статья, добавлен 03.12.2015The methods of defrosting frozen berries affect sensory characteristics and the indicator of cell juice loss of the resulting product. This method preserved the tissue strength of the berry surface completely, resulting in null loss of cell juice.
статья, добавлен 14.02.2025Optical properties of nanocomposites are important and useful in their consumer satisfaction capacities. In this research, coloration properties of dyed PA6/Nano TiO2 nanocomposite is studied using a combined Mie and Kubelka-Munk light scattering theory.
статья, добавлен 30.07.2016Damage assessment of components of automobile and aircraft internal combustion engines, made of gamma titanium aluminides. Recommendations to prevent the negative influence of high temperatures in multilayer thin films on gamma titanium aluminides.
статья, добавлен 14.07.2016Research foaming effect, which can be the addition of zeolite in the asphalt mixture that causes the of the asphalt, better adhesion and ability lehkoukladalnist mixture. Characteristics of adsorbed water allocation as a function of time and temperature.
статья, добавлен 24.02.2016Tissue Paper and its properties. Space and weight characteristics. Carrier and type of aircraft for transportation. Limitations by sizes, weight and loading on the floor. Calculation of number of bags that we can put into one box. Manipulation signs.
курсовая работа, добавлен 16.12.2013Searching for cheap and effective corrosion protection methods. Research on the possibility of using "green inhibitors" as anti-corrosion measures. Characterization of the properties of the complex of inhibitors, alkaloids and tannins included in plants.
статья, добавлен 04.07.2022Studies on the preparation of pasty high-filled compositions and evaluation of their rheological properties using a rotational visco-meter "Reotest-2" on the cone-plane system. Evaluation of sedimentation resistance of compositions and their flow.
статья, добавлен 30.10.2016The purpose of research was isolation and identification of Enterococcus species from raw milk and traditional dairy products and their biochemical properties were examined. Some biochemical and technological properties of the strains were determined.
статья, добавлен 28.05.2022Polytetrafluoroethylene as one of the promising polymers for tribotechnical purposes. The use of polysulfonamide fiber to increase the wear resistance of polytetrafluoroethylene under conditions of friction without lubrication in reciprocating motion.
статья, добавлен 11.08.2021