Development of analysis method for physical-chemical phenomena of orien process in electric arc furnaces in energy-metallurgical complex
The base of constructing computer model of the analysis of complex physical-chemical phenomena in the process ORIEN in continuous arc furnace is as the main aggregate of energy-metallurgical complex. A mathematical model of physical-chemical processes.
Подобные документы
Research of influence of the electric discharge machining on change the properties of water. The formation of free radicals and hydrogen peroxide under the influence of cavitation is established, which leads to an increase in the whiteness of the wool.
статья, добавлен 21.12.2016Familiarity with the basic method of identification of defects of the drive with induction motor using wavelet transform for the test signals. Analysis of a neural network model converted to the next subsequent stages on the basis of the algorithm.
статья, добавлен 28.08.2016Development of an algorithm for predicting and monitoring the resource of mechanical systems. A method for multi-criteria evaluation of the complex safety characteristic of a road vehicle. Synthesis of active traffic management experiences in Europe.
статья, добавлен 26.09.2021Исследование основ построения компьютерной модели для анализа сложных физико-химических явлений процесса ORIEN, происходящего в электродуговой сталеплавильной печи непрерывного действия, являющейся основным агрегатом энергометаллургического комплекса.
статья, добавлен 02.11.2018Obtaining complex fertilizers by oxidation of Angren brown coal with a mixture of nitric and sulfuric acids and decomposition of oxidation products with a mineralized mass and slime phosphorite of the Central Kyzyl Kum. Fertilizers' commercial properties.
статья, добавлен 27.01.2021Assessing the development of the global economy and aerospace industry. Finding ways to reduce environmental pollution, energy consumption and flight costs. Increasing the thrust-to-weight ratio, safety and reliability of modern aircraft engines.
статья, добавлен 20.07.2024Results Global Capstone Design Workshop in order to find eco-friendly, energy-saving methods in our daily lives and to develop and improve them. In particular, selecting topics based on practical methods for Global Capstone Design will be the main focus.
статья, добавлен 20.09.2021Estimating the number of conduction modes can, their evaluation. Analysis of the model for the mean free path for backscattering. Calculation of near equilibrium thermoelectric transfer coefficients. Setting the differences in voltage and temperature.
статья, добавлен 30.07.2016The essence of a comprehensive study of the operational characteristics and reliability of roller bearings. Analysis of a mathematical model to express rolling pad durability as a function of a random argument based on the conductivity distribution law.
статья, добавлен 12.08.2022The main production methods jet fuels rocket engines. Prospects for the use of various raw materials to produce jet fuels in the context of limited energy resources. The impact of processing production and use of aviation fuels on the environment.
статья, добавлен 23.02.2016Analyze existing installations for fire testing of building constructions both in Ukraine and abroad. Design a model of fire furnace was. Determination of the fire resistance of different constructive systems. Implementation of models of fire furnаces.
статья, добавлен 24.02.2016Description and analysis of the characteristics of main problems to be solved in design of fixture. Examination and description of the main principles of work with the developed software to automate the modeling process and the design of the led lamp.
статья, добавлен 26.06.2016The analysis of the cement production process in Ghana, which is limited to grinding clinker into cement and its packaging and distribution. The equipment of grinding chains, the best configuration. Control methods used for cement grinding chains.
статья, добавлен 30.05.2018The manufacturing industry may be a key sector for the application of this technology, reduce the use of conventional energy sources, especially in the food industry located in the Andean region. Ecuadorian policies and regulations on renewable energy.
статья, добавлен 23.07.2021The article discusses one of the promising directions of development of the electric power industry, associated with the use of controlled AC power lines using FACTS devices, in particular, the advantages of static thyristor compensators are considered.
статья, добавлен 10.12.2024Analysis of the overall stiffness range of most plastics in combination with common efforts to use the thinnest wall thickness possible. Dependence of plastics processing processes on tool quality and process parameters. Basic design considerations.
статья, добавлен 10.03.2019Structure of engineering systems. A description of the statistical procedures recommended for use in reliability analysis "related" components. The choice of an appropriate probabilistic model for predicting the reliability of components of one's sibling.
статья, добавлен 14.09.2016A resource-saving technology complex processing of highly mineralized mine waters of mining enterprises of the Kryvyi Rih iron ore basin has been developed. Of all the known methods of water desalination, the only method in this case is reverse osmosis.
статья, добавлен 26.12.2023Improving the method of dynamic analysis of mechanical systems dynamic factors dynamic model which can be represented by three-mass system of row with the first driving mass with prestressing elastic drive connections. Finding the dynamic coefficients.
статья, добавлен 30.07.2016Development of improved methods of calculation to quantify the anodic dissolution process began. Determining factors of electrochemical dissolution of the surface layers of steel, obtained at different process conditions electroerosion machining.
статья, добавлен 30.07.2016- 71. Strength characteristics of a composite laminate with a center hole under biaxial tensile loading
The developing of a useful model dealing directly with biaxial loading of composite plates with stress concentrations, which can be called progressive damage model. Progressive damage model was utilized to analyze the damage evolution of specimen.
статья, добавлен 18.01.2021 The service designed to facilitate the process of SCs, with demonstrating its elements in particular, database and knowledge base, arrangement of information for various users. In the authors’ opinion, such services will become a step towards no sphere.
статья, добавлен 13.10.2022Analysis of the existing methods of the automatic regulation of the process of the drying of timber. Algorithm of the regulator of kiln drier. The need of regulating the drying process taking into account the characteristics of wood and drying agent.
статья, добавлен 28.11.2016Deployment of two-arm robots in different plants. Designing of an educational workplace for assembly, equipped with a two-arm robot. Using of Schunk electric grippers to adjust the range of movement and clamping force. Design a robotic workplace.
статья, добавлен 28.08.2020- 75. The Impact Analysis of Breakthrough Technologies on the Development of Russian Oil and Gas Companies
Studying the process of developing and disseminating disruptive technologies. Additive manufacturing or 3D printing. Artificial intelligence and virtual reality. A glimpse into the future of science, technology and business - 35-year perspective.
дипломная работа, добавлен 11.09.2020