Influence of cutting conditions and radius of the rounding of tool made of composite 10N on surface layer state during turning of hardened steels
Influence of the type of machining and tool material on the structural state of the surface layer of steel during machining. Advantages of turning with composite 10 incisors compared to grinding. The occurrence of tensile stresses during metal processing.
Подобные документы
Search for ways to reduce emissions of pollutants. Biomass as a composite material. Laboratory installation for glucose fermentation to ethanol. Study the concentration of xylose as a function of time. Process flow diagram of the synthesis of bioethanol.
статья, добавлен 23.06.2018The developing of the numerical model of viscoelastic material using finite element method. The comparison of the obtained results with use of FEM software with experimental data. The calculation of the stress and strain state of the asphalt specimen.
статья, добавлен 29.09.2016Transit of natural gas along the territory of Ukraine to the countries of the Western and Central Europe. Main resons of the loss of pipeline efficiency. Necessity for studying of the operation modes of the gas transport system during underloading.
статья, добавлен 01.12.2017Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016Intensive deformation of the elastic system of the machine - specific features of the cutting process. Circumcision of the gear with a disk the cutter in the continuous circular movement of the pinion - essence of the radial-circular cutting mode.
статья, добавлен 14.09.2016The need to design new drilling equipment. The analyzed existing options for solving the problem solve it to some extent. To eliminate them, it is proposed to use elastic elements (ring springs) in the construction of double-shoulder tool joints.
статья, добавлен 02.03.2021The model of the disperse material behavior under vibration in the hole of the dispenser based on the Navier-Stokes equations. The influence of the power factor on the movement of the product and the parameters of the hole on the vibrating dosing process.
статья, добавлен 14.09.2016Analyzed the impact of long-term operation of gas pipelines, as well as natural stress concentrators on the physico-mechanical properties of welded joints of steel 17G1S. Regularities of the destruction of the material of welded joints of gas pipelines.
статья, добавлен 30.01.2016Analysis of the overall stiffness range of most plastics in combination with common efforts to use the thinnest wall thickness possible. Dependence of plastics processing processes on tool quality and process parameters. Basic design considerations.
статья, добавлен 10.03.2019Nonaxisymmetric boundary value problem of elasticity theory for multiconnected body with cylindrical boundaries. Boundary conditions by the generalized Fourier method. The numerical analysis of stresses in the areas of their greatest concentration.
статья, добавлен 30.10.2016Directions of development of production technology of high-precision parts. Research in the field of management precision and quality parameters of the treated surface. Improvement of the technological process, equipment, instruments and devices.
статья, добавлен 06.12.2016Comparison of the results of processing arrays light absorption alternate method of incorporating calibration surface with other methods. Determination of Ni2 +, Co3 +, Fe2 +, Cu2 + from 1-(2-pyridylazo)-2-naphthol in aqueous-micellar environment.
статья, добавлен 23.02.2016Character of force of friction is investigated and set in nominally-immobile connections on the stage of nominal adhesion and to passing to skidding. The capacity of connections are given by the method of coating on the basis of fusible to the alloy.
статья, добавлен 27.07.20213D printing (Additive Manufacturing Process, AM) is any of various processes used to make a three-dimensional object without the use of dies, molds or machining. The most basic, differentiating principle behind 3D printing. General principle modeling.
статья, добавлен 20.02.2019The regularities of macromolecules behavior in the flow with longitudinal velocity gradient and manifested in this case effects of elastic deformations have importance in understanding the mechanism of anomalously high cutting power of water-polymer jet.
статья, добавлен 28.02.2016The analysis of the cement production process in Ghana, which is limited to grinding clinker into cement and its packaging and distribution. The equipment of grinding chains, the best configuration. Control methods used for cement grinding chains.
статья, добавлен 30.05.2018Analysis of the selective adsorbent. Influence of modifying pentasyl group synthetic zeolites (Silicalite-1 and Silicalite-2) with metal cations capable to specific interactions on the separation ability of the chromatographic column has been studied.
статья, добавлен 02.04.2014Thermosetting plastics, their irreversible chemical reaction (polymerization), including the effects of temperature and time. Bringing the resin composition to a liquid state, forcing the liquid to flow into the cavity of the desired configuration.
статья, добавлен 10.03.2019Study of field distribution in structures such as a gold lattice, a graphene layer, and a silicon substrate. Conditions of maximum electromagnetic field distribution by these structures for the purpose of using them in photonics and electronics devices.
статья, добавлен 24.02.2024Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
статья, добавлен 21.12.2016The main production methods jet fuels rocket engines. Prospects for the use of various raw materials to produce jet fuels in the context of limited energy resources. The impact of processing production and use of aviation fuels on the environment.
статья, добавлен 23.02.2016Controlling the rudder, counting the distance traveled, turning off the engine and resetting the wings - the simplest autopilot functions. Radio control - the technology, that allows drones to follow difficult routes, perform maneuvers in the air.
статья, добавлен 27.02.2021The role of coke gas cleaning in ensuring optimal operational productivity and compliance with environmental requirements in coke production. The influence of configurations and optimization of nozzle placement strategies on the quality of coke gas.
статья, добавлен 17.06.2024Application and classification of construction materials. Definition of key indicators affecting the choice of material. Alloys based on copper and aluminum. Properties, applications and benefits of innovative materials, thermosetting plastics, ceramics.
статья, добавлен 10.03.2019