The use of combined heating systems
Combined heating - a modern way of organizing the heat supply of the house. Use of independent sources of thermal energy. The advantages of using solar collectors. The principle of operation of the stove, fireplace insert. Types of combination boilers.
Подобные документы
There exists a wide range and a considerable potential of alternative gas fuel types. Uncertainty, flexibility of nonconventional fuels’ composition seriously limits the possible exploitation of these energy sources. Equations of chemical thermodynamics.
статья, добавлен 30.07.2016System for billet continuous caster’s mould heat engineering parameters monitoring. Formation of the internal heat transfer surfaces. Calculation the indicators: average heat flux density, overall heat exchange coefficient. Effective gas gap thickness.
статья, добавлен 30.01.2016Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).
статья, добавлен 07.09.2022This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022The essence of ventilation systems. Operation of special ventilation shafts, requirements for the location of the ventilation shafts. The design of the ventilation system, its role in the design of complex transport systems, road and rail tunnels.
контрольная работа, добавлен 19.02.2019Problems of hardware configuration in systems for stabilization of information and measuring devices operated at vehicles of wide class in difficult conditions of disturbances action. Analysis of modern devices and units used in stabilization systems.
статья, добавлен 14.09.2016Assessing the development of the global economy and aerospace industry. Finding ways to reduce environmental pollution, energy consumption and flight costs. Increasing the thrust-to-weight ratio, safety and reliability of modern aircraft engines.
статья, добавлен 20.07.2024Consideration of the problems of energy conservation and management of production costs at metallurgical enterprises. The necessity of carrying out an energy-resource-saving policy of metal producers has been substantiated; directions of energy saving.
статья, добавлен 30.09.2021Analysis of the use of aluminum alloys in the transport sector. Increased speed, safety, energy savings and reduced transport emissions thanks to aluminum. Ensuring a smooth ride and improved heat dissipation from the braking system using aluminum discs.
статья, добавлен 19.03.2024The study investigates the kinematics of robots with the aim of expedient use of certain engineering solutions solving certain problems related to the accuracy of robot movement. The object of study is various types of robots and their kinematic systems.
статья, добавлен 20.07.2024- 37. Complex of activation tools for energy saving measures in housing and utilities sector of the city
Regulatory basis that promotes the development of renewable energy in Ukraine. The features of energy saving measures as a complex final consumption product. A complex of activation instruments being adjusted to the characteristics of individual objects.
статья, добавлен 24.02.2016 Technological parameters (thermal loss, cooking time, etc.) grilling the second meat dishes. Use marinades based on vegetable oil and vinegar as the most common. The composition of the marinade with yogurt and kiwi. The energy value of ready meals.
статья, добавлен 25.12.2016Determination of material properties of polymeric resins. Processing and finishing operations commonly used in the manufacture of plastic products. Analysis of relative differences in the coefficient of thermal expansion and modulus of elasticity.
статья, добавлен 10.03.2019The article discusses one of the promising directions of development of the electric power industry, associated with the use of controlled AC power lines using FACTS devices, in particular, the advantages of static thyristor compensators are considered.
статья, добавлен 10.12.2024Innovative approaches that would improve the conceptual solutions of service robots and their operation in the application space. Involvement of robotics with different conceptual solutions for their mobility. Application of the wheel chassis principle.
статья, добавлен 28.08.2020Special supervisory control system responsible for the informative data acquisition about the current enterprise production and its control. The main SCADA. The general structure of SCADA. The Three main structure components modern SCADA-systems.
статья, добавлен 30.04.2019Huge gaps in structure and performance between different types of engines. The types and performance of modern advanced aero-engines, their practical applications in various aviation fields, and the development direction of future aircraft engines.
статья, добавлен 04.09.2024Reduce costs and increase durability of threaded connections. The relationship between the thermal treatment and the strength of the threaded connection. Compare the minimum tightening hermetic threaded connections three types of anaerobic adhesives.
статья, добавлен 28.09.2016Modeling and principle of operation positioner power consumption in the direct mode of automated management. Evaluation of the use of the corrected function decline in electricity consumption in the automated control system of technological process.
статья, добавлен 28.02.2016An unfavorable combination of various factors leads to the occurrence of landslides, as catastrophic manifestations of processes in rock massifs. As a result, there is a threat to human life, damage and destruction of residential and industrial buildings.
статья, добавлен 16.06.2024Evaluation of the technical system and its subsequent use for decision-making to ensure complex technical systems with appropriate quality of work. The characteristics and specificity of the model changes performance States based on the Markov chain.
статья, добавлен 29.01.2016The results of expedition research of some solar salt works of the South of Ukraine (Kherson region, AR Crimea) and lake Baskunchak (Astrachan region, Russia). Discussing the approaches to modeling natural environment in D. salina laboratory culture.
статья, добавлен 27.07.2016The main production methods jet fuels rocket engines. Prospects for the use of various raw materials to produce jet fuels in the context of limited energy resources. The impact of processing production and use of aviation fuels on the environment.
статья, добавлен 23.02.20163D printing (Additive Manufacturing Process, AM) is any of various processes used to make a three-dimensional object without the use of dies, molds or machining. The most basic, differentiating principle behind 3D printing. General principle modeling.
статья, добавлен 20.02.2019