Awareness and Attitude of Latvian Construction Companies Towards Sustainability and Waste Recycling
Construction and Demolition Waste (CDW). Accepted that reliable strategies and innovative technologies need to be developed to increase the share of CDW-derived materials in new residential constructions while simultaneously minimizing future CDW.
Подобные документы
Polytetrafluoroethylene as one of the promising polymers for tribotechnical purposes. The use of polysulfonamide fiber to increase the wear resistance of polytetrafluoroethylene under conditions of friction without lubrication in reciprocating motion.
статья, добавлен 11.08.2021Discussing an innovative technology for fault detection of the pipelines transportation. Study and characteristic repeated correlation of the above structures with kinematic diagram of failure, which make for adequate predicting the remaining life.
статья, добавлен 02.11.2018Results of research for increase in an output of target paraffins during of deparaffinisation mineral oil are resulted by a spirit-water solution of a carbamide. The variant removal of paraffins which output normal alkanes from the potential maintenance.
статья, добавлен 10.08.2018The study of the Microbiology of the procedure of biological fermentation, physico-chemical characteristics of activated sludge of the Bortnichy station of aeration. Offer possible ways to increase the speed of the procedure of biological fermentation.
статья, добавлен 27.11.2016In scientific work, for the first time in the country, the technology of extracting organ bentonite composition used in hydrocarbon-based drilling fluid from local raw materials - bentonite is being investigated. The processes of sieving and cleaning.
статья, добавлен 12.12.2024Features the design of tooling for casting under pressure of zinc alloys. The problem that arise when designing a press-forms of analysis. Experiments to study thermal stability of materials, parts, equipment subject to cyclic thermo-mechanical treatment.
статья, добавлен 17.12.2016Reduce costs and increase durability of threaded connections. The relationship between the thermal treatment and the strength of the threaded connection. Compare the minimum tightening hermetic threaded connections three types of anaerobic adhesives.
статья, добавлен 28.09.2016The investigation is focused on the evaluation of residual stresses resulting from cold deformation and welding in candidate target structural materials such as martensitic Alloys EP-823 and HT-9, and also an austenitic Type 304L stainless steel.
магистерская работа, добавлен 14.02.2013Nanocomposites comprising ray in a polymer. The reflection mechanical properties material. Increasing the polymer properties by forming the interphase. Obtaining curves of stress-strain states of macroscopic samples irradiated polymer materials.
статья, добавлен 30.07.2016Development of a diagram and installation of a prototype of a two-flow heat pipe with the ability to regulate the parameters of the working environment. Using of the method of pulsed supply of liquid coolant to increase the heat transfer of a heat pipe.
статья, добавлен 14.12.2024Super ultrahard nanostructured and nanocomposite thin films. Preparation and industrial applications of hard and superhard nano-structured coatings on tools for machining (drilling, milling, turning), forming, stamping, injection moulding and the like.
статья, добавлен 30.07.2016Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.
статья, добавлен 30.07.2016The relation between the particles velocity and the deposition efficiency of material powders. A different approaches for calculating the critical deposition velocity. Computational fluid dynamics model. Critical particle velocity determination.
статья, добавлен 29.11.2016The comparative analysis of the microstructure, phase and chemical composition of the experimental alloys of the Fe-W type with the standardized grade ferrotungsten. The feasibility of using Fe-W for the manufacture high tungsten materials based on iron.
статья, добавлен 30.01.2016- 90. Polyphenol composition and technological characteristics of the coloured whey from various origin
The purpose of this scientific work was to determine the polyphenolic composition and technological characteristics of colored whey of various origins, obtained by coagulation of milk proteins with traditional berry raw materials and wild herbs.
статья, добавлен 10.06.2022 The main advantages and disadvantages of well-known spiral drills with a multi-stage blade. It is described that the bridge, together with the steps adjacent to the grooves, is a small centering drill, performs centering and drilling during the process.
статья, добавлен 10.02.2021Іn this paper we present the microcontroller system for the diagnostics and evaluation of the Stirling engine performance. For this purpose the analysis model for the prototype engine has been developed to present the engine’s improved benchmarking result
статья, добавлен 29.07.2016Description of main activities CAE Partner GmbH аn Enterprise of the MSC Group, foundation of the company and development of its in Europe. Software-products, services and the scope of production activities, which use technology developed by the company.
презентация, добавлен 21.02.2014Review of works on the creation and study of environmentally friendly nanostructured polymer composites. Technology of production and application of nanocellulose. Development of new environmentally friendly hydrophobic polymer composites, their scope.
статья, добавлен 29.07.2017Analysis of the scientific foundations of the development and implementation of raw material and product traceability systems in bakery production. Outline and scientific justification of measures for organizational improvement of product traceability.
статья, добавлен 04.09.2023Створення компанією Outlast Technologies матеріалу, що представляє собою капсули з парафіном у вигляді мікрокульок. Використання тканин і одягу, друкованих на 3D-принтері. Винахід гелю, що накопичує холод та матеріалу, що самостійно усуває пошкодження.
статья, добавлен 01.05.2015Study of the main tasks of industrial enterprises. A number of key factors affecting production. Ways to ensure production of high-quality products necessary for society, ways to improve production indicators based on increasing production efficiency.
статья, добавлен 26.02.2023Various experts are unanimous in the fact that technological trends in 2023 that have the potential to change the world, affect many areas of life, such as medicine, science, education and business, including in Ukraine, will be artificial intelligence.
статья, добавлен 06.11.2023Proposes a method to increase information content in studying frequency properties of automatic control systems typical dynamic links based on representation of the link transfer functions in the form of graphs. Examples of separate links are provided.
статья, добавлен 25.01.2022Determination of the design principles of shaping in the design of fur garments that provide innovative character of the design activities and high level of artistic and stylistic properties of the projected objects. Principles of composition for design.
статья, добавлен 31.05.2022