Polymer nanocomposite films with embedded carbon nanotubes
The conductive nanocomposite films on the basis of reactionary copolymers received. The threshold of their percolation is determined. It was shown that its value depends on the size of specific surface of nanotubes and conditions of composite obtaining.
Подобные документы
The model of spatially distributed curing process of epoxy matrix polymeric composite. The model using the projections of Pareto points set on the 8-dimensional space of design variables. Сontrol synthesis for the closed mould curing of composite spar.
статья, добавлен 30.05.2017Creep and fatigue in polymer matrix composites. Stages, characteristics and deformation of creep. Mechanisms of creep. General creep equation. Dislocation, nabarro-herring, coble creep. Creep of polymers, of concrete. The molecular weight of the polymer.
курсовая работа, добавлен 02.02.2015The use of metallic pigments with features of the geometry of the surface of printing materials. Functionality of the "Materials Editor" program and a group of parameters of geometric surface structures. Assessment of surface structures in the 3D system.
статья, добавлен 12.06.2023The types of dosimeters: silicon-diode detectors, diamond detectors, liquid ion chambers and radiographic films. The spatial resolution as a key feature for next-generation dosimeters. Results using one layer of DOSIORT. Isodose curves in the test.
статья, добавлен 12.10.2013Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021Development of improved methods of calculation to quantify the anodic dissolution process began. Determining factors of electrochemical dissolution of the surface layers of steel, obtained at different process conditions electroerosion machining.
статья, добавлен 30.07.2016Aniline and its polymerization on cotton fabric to produce conductive cotton by chemical polymerization. Polyaniline is one of the electrically conductive polymers. Polymerization using several concentrations of aniline (ANI) and hydrochloric acid.
статья, добавлен 15.01.2021Comparative analysis of the effect of chemical compounds on the process of forming an electric arc and the conditions for its combustion.Metal transfer in the interelectrode gap under experimental conditions. Specific power of electric arc discharge.
статья, добавлен 29.09.2016- 34. Strength characteristics of a composite laminate with a center hole under biaxial tensile loading
The developing of a useful model dealing directly with biaxial loading of composite plates with stress concentrations, which can be called progressive damage model. Progressive damage model was utilized to analyze the damage evolution of specimen.
статья, добавлен 18.01.2021 The regularities of macromolecules behavior in the flow with longitudinal velocity gradient and manifested in this case effects of elastic deformations have importance in understanding the mechanism of anomalously high cutting power of water-polymer jet.
статья, добавлен 28.02.2016Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016Research of mathematical model of the process intrusion forming polymer products. Establishing a dependency on the angle of melt costs lifting screw injection unit in the material cylinder based on the geometric parameters of extrusion head and mold.
статья, добавлен 18.02.2016Aluminum can be considered green when its production and alloys processing are low-carbon (as well as associated with the reduced amount of other greenhouse gases, hazardous chemicals and environmental pollutants), include recycling of scrape and waste.
статья, добавлен 19.09.2024Defining of dimensional relationships where the aspect ratio. The building process for 3D microdevices. The features of creation surface energy high enough to maintain adhesion of the electroplated material until completion of the plating process.
реферат, добавлен 16.04.2017Analysis of design features and parameters of automobile and aircraft engines is carried out. It is shown that car engines, despite the high technical level achieved at the beginning of the 21st century, do not technically meet aviation requirements.
статья, добавлен 19.06.2022Demand for vehicles with a zero carbon footprint. Understanding the predictors of human behavior regarding the potential adoption or rejection of a technology. A comprehensive consideration of the possibilities of switching to low-emission vehicles.
статья, добавлен 20.07.2024Establishing conditions for quality surface finish in grinding abrasive wheel. Determine the optimal mode grinding, allowing you to get the highest performance and lowest cost processing, providing the necessary tech-tech requirements for machine parts.
статья, добавлен 14.09.2016А technology for manufacturing composite materials - flocculants-coagulants on aluminum-silicon and iron-silicon base. The evaluation of the effectiveness of the developed flocculants-coagulants for cleaning of natural water and industrial wastewater.
статья, добавлен 11.01.2018The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022The use of the boundary values of parameters of mould displacement of the earth's surface and refining the workings of the design scheme to predict the trajectory of sedimentation. Determination of empirical coefficients of mathematical equations.
статья, добавлен 30.07.2016Methods of the equation of the cutting edge in the absolute coordinate system. A helix - a trace of movement of the cutting tool along the workpiece. Characteristics of the mathematical model of the formation of the microrelief surface when grinding.
статья, добавлен 06.05.2018The antibacterial effect of chitooligosaccharides, evaluated against various microorganisms. The oligosaccharides from chitosan and fractionated with ultrafiltration membrane and enzymatic bioreactor. The molecular weight of chitooligosaccharides.
реферат, добавлен 07.09.2011During the development of natural resources of people actively in contact with unfavorable environmental conditions. It concerns the use of floating means. To reduce the adverse effects of environment requires the design of products for special purposes.
статья, добавлен 25.11.2016Properties and structure of hydrocarbons. Types and communication aromatics. The nature of the relationship between the carbon atoms. The methods of extraction and processing of oil. The use of the rectification columns for fractionating of raw materials.
презентация, добавлен 30.06.2014Analysis of TEC1-12705 and TEC1-12706 semiconductor refrigeration chip types with different hot heat dissipation conditions. Heat pipe heat dissipation test device for radiators. Effect of hot end heat dissipation conditions on cold end temperature.
статья, добавлен 10.10.2024