The improvement of tribological parameters of nano structural multilayer coatings for unipolar modular joint applications
The study of methods of improving mechanical properties of coatings of implants by reducing the value of young's modulus and coefficient of friction in the fluids of the body to improve the tribological parameters of the implants with ceramic coatings.
Подобные документы
Environmental biotechnology study the use of living organisms for a wide range of applications in hazardous waste treatment and pollution control. The use of biotechnology in the dairy industry. Methods for producing whey. Security staff activity.
курсовая работа, добавлен 13.04.2015Aniline and its polymerization on cotton fabric to produce conductive cotton by chemical polymerization. Polyaniline is one of the electrically conductive polymers. Polymerization using several concentrations of aniline (ANI) and hydrochloric acid.
статья, добавлен 15.01.2021Comparison of the results of processing arrays light absorption alternate method of incorporating calibration surface with other methods. Determination of Ni2 +, Co3 +, Fe2 +, Cu2 + from 1-(2-pyridylazo)-2-naphthol in aqueous-micellar environment.
статья, добавлен 23.02.2016Investigation of physical and mechanical properties of the cement using of barium-containing clinker and gypsum stone. Effect of additives of barium-containing sulfateferrite clinker gypsum stone. Longer hardening and limits and compressive strength.
статья, добавлен 23.02.2016The present study is a mathematical modeling aimed at the dynamic force analysis of printed circuit boards in order to eliminate dynamic stresses to an acceptable level and ensure the strength and reliability of the printed circuit board design.
статья, добавлен 02.06.2022Study of the main tasks of industrial enterprises. A number of key factors affecting production. Ways to ensure production of high-quality products necessary for society, ways to improve production indicators based on increasing production efficiency.
статья, добавлен 26.02.2023Motion systems as core technologies, as mechanical systems, like microelectronic manufacturing equipment, are required to achieve high speed and accuracy. The influence of the dynamics of a mechanical system on the quality of the position tracking syste
статья, добавлен 26.08.2020Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.
презентация, добавлен 20.10.2014Use of selective solvents in oil refining industry. Methods of cleaning oil raw materials. Technology of fractionation of extracts of phenol distillates, their chemical properties. Modeling the column of industrial extraction of petroleum products.
статья, добавлен 10.08.2018Damage assessment of components of automobile and aircraft internal combustion engines, made of gamma titanium aluminides. Recommendations to prevent the negative influence of high temperatures in multilayer thin films on gamma titanium aluminides.
статья, добавлен 14.07.2016Analysis of a mathematical model to determine the transient modes of rotary kilns, drying drums and mills taking into account electromagnetic processes in the induction motor. Mechanical vibrations of the elements of the drive mechanism, long metal body.
статья, добавлен 14.09.2016Consideration and characteristics of the scheme double-point wheel-rail interaction. Familiarization with the erosive wearing. Definition of the dependence of the coefficient of adhesion on the temperature. Analysis of sand system of the locomotive.
статья, добавлен 26.09.2016Defining and analysis the essence of robot is an automatic device, which has a manipulator – mechanical analogue of human hand, and manipulator control system. Consideration and characteristic of the structural features model of domestic robot–helper.
статья, добавлен 29.01.2016Analysis of the overall stiffness range of most plastics in combination with common efforts to use the thinnest wall thickness possible. Dependence of plastics processing processes on tool quality and process parameters. Basic design considerations.
статья, добавлен 10.03.2019The mass variable is considered the first and most important basis for motion events. Mass is what the body contains of matter, and mass exists in three states in the universe, and it is unique. From a mechanical point of view it is considered a variable.
статья, добавлен 12.05.2024The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).
статья, добавлен 07.09.2022This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022The main stages of the automatic assembly of cylinder connection. The structural elements of the flexible automated production. Prospect for the automation of machine building production. The main types of heat exchange in technological systems.
контрольная работа, добавлен 05.04.2016The need to design new drilling equipment. The analyzed existing options for solving the problem solve it to some extent. To eliminate them, it is proposed to use elastic elements (ring springs) in the construction of double-shoulder tool joints.
статья, добавлен 02.03.2021Models which adequately combine technological parameters with indicators of treatment quality have been designed for the cavitation cleaning processes of sewage from organic admixtures. Water of industry and public water use it is considered as sewage.
статья, добавлен 14.09.2016Dynamic designer as a way to save time and cost of getting new products to market, and improving old ones without a huge investment in equipment. Using parametric solid models for to develop the form of the parts. Mechanical desktop to build prototypes.
презентация, добавлен 21.02.2014Research of mathematical model of the process intrusion forming polymer products. Establishing a dependency on the angle of melt costs lifting screw injection unit in the material cylinder based on the geometric parameters of extrusion head and mold.
статья, добавлен 18.02.2016Development of an algorithm for predicting and monitoring the resource of mechanical systems. A method for multi-criteria evaluation of the complex safety characteristic of a road vehicle. Synthesis of active traffic management experiences in Europe.
статья, добавлен 26.09.2021Determination of the rolling parameters that allow obtaining a bimetallic ribbed bar. Familiarization with the shape and dimensions of the round ribbed finished pass and of the bimetallic flat oval band obtained in numerical modelling - cross-section.
доклад, добавлен 24.12.2014Technological parameters (thermal loss, cooking time, etc.) grilling the second meat dishes. Use marinades based on vegetable oil and vinegar as the most common. The composition of the marinade with yogurt and kiwi. The energy value of ready meals.
статья, добавлен 25.12.2016