Approaches to optimize Uzbekistan’s investment in irrigation technologies
The traditional irrigation method, based on simple open canal systems, is extremely ineffective for managing critical and limited water resources. Conduct a qualitative assessment of irrigation water losses due to evaporation and system inefficiencies.
Подобные документы
The work of complex heat-recovery systems using water-hiting and air-heating heat-recovery exchangers was investigated. The combined use recovered heat to heat the return heat-network water, water of chemical water-purification system or combustion air.
статья, добавлен 22.04.2021The main objective is the operation of heating systems heat supply residential, public and industrial buildings and structures in order to provide municipal needs (heating, ventilation and hot water supply). Checking calculation of heat supply systems.
статья, добавлен 10.03.2019Development of the composition of water-epoxy coating NIPU. Study the compatibility of components in water-based coatings. The optimum ratio of the components of the composition to obtain the necessary physical and mechanical properties of the coating.
статья, добавлен 29.07.2017Evaluation of the technical system and its subsequent use for decision-making to ensure complex technical systems with appropriate quality of work. The characteristics and specificity of the model changes performance States based on the Markov chain.
статья, добавлен 29.01.2016Definitions and models of control in water supply and sanitation industry. Concession model of control sanitation industry in international practice. Condition of networks and evolution of model. Research limitations and future research directions.
дипломная работа, добавлен 13.11.2015Research of influence of the electric discharge machining on change the properties of water. The formation of free radicals and hydrogen peroxide under the influence of cavitation is established, which leads to an increase in the whiteness of the wool.
статья, добавлен 21.12.2016A resource-saving technology complex processing of highly mineralized mine waters of mining enterprises of the Kryvyi Rih iron ore basin has been developed. Of all the known methods of water desalination, the only method in this case is reverse osmosis.
статья, добавлен 26.12.2023Development of methods for heat engineering tests of hydrodynamic pumps. Processes which occur in activator with water thermal hydrodynamic pump. Water flow speeds in a system. Gas bubbles are the product of centrifugal force effecting on carrier flow.
статья, добавлен 01.08.2016Models which adequately combine technological parameters with indicators of treatment quality have been designed for the cavitation cleaning processes of sewage from organic admixtures. Water of industry and public water use it is considered as sewage.
статья, добавлен 14.09.2016Approaches to optimization and the development of the model given the parameters and constraints of the subject area to improve the efficiency of product quality. Modules of adaptation and realization of adaptation functions and testing system components.
статья, добавлен 30.07.2016Information about the general state of technologies for the utilization of secondary energy resources and environmental resources. The essence of phase transitions in food production technologies. The possibility of creating energy-material circuits.
статья, добавлен 10.06.2022А technology for manufacturing composite materials - flocculants-coagulants on aluminum-silicon and iron-silicon base. The evaluation of the effectiveness of the developed flocculants-coagulants for cleaning of natural water and industrial wastewater.
статья, добавлен 11.01.2018Motion systems as core technologies, as mechanical systems, like microelectronic manufacturing equipment, are required to achieve high speed and accuracy. The influence of the dynamics of a mechanical system on the quality of the position tracking syste
статья, добавлен 26.08.2020Investigation of multilayer coatings with different bilayer periods 8-100 nm. Using of very thin layers in multilayered system leads to increasing of specific density of interphase boundaries and it leads to increasing of critical loading of destruction.
статья, добавлен 30.07.2016Using and improvement of qualities of products of oil processing. The process of obtain a water-soluble colloidal sulfur with seating stability, good solubility in water, high biological activity. Selection of conditions to receiving polymeric products.
статья, добавлен 11.03.2019Proposes a method to increase information content in studying frequency properties of automatic control systems typical dynamic links based on representation of the link transfer functions in the form of graphs. Examples of separate links are provided.
статья, добавлен 25.01.2022The surfactants have been objects of studies all over the world. Development of approach to surfactants with controllable structure and properties based on the natural raw materials applicable for cosmetics production as dispersed systems stabilizers.
статья, добавлен 23.09.2016The relation between the particles velocity and the deposition efficiency of material powders. A different approaches for calculating the critical deposition velocity. Computational fluid dynamics model. Critical particle velocity determination.
статья, добавлен 29.11.2016Structure of three-cone rock bit with inserted hard-alloyed rock-destruction and protecting equipment, in which the chief components are marked. The minimally possible set of operators, which support qualitative performance of technological process.
статья, добавлен 14.09.2016Analysis of the development of the basic methods of engineering the contact surfaces of tribological systems. Characteristics of the problems and prospects of development of technologies of creating surfaces of discrete-oriented structure of the system.
статья, добавлен 18.02.2016To separate simultaneous removal of mechanical impurities and water - the main tasks of filters. Analysis of the graphical representation of the piping system for pumping fuel and necessary equipment for the storage and dispensing of fuel operations.
курсовая работа, добавлен 29.03.2018Comprehensive analysis of allelic protein variants suitable for use in bakery products made from Iraqi wheat varieties, as well as biological evaluation of these varieties using a genetic source using a general method of qualitative grain selection.
статья, добавлен 18.03.2021Analysis of ideas about conducting an early assessment of emerging medical technologies. Developing medical products and services with added value. Determining the commercial viability of medical products and services in the early stages of development.
статья, добавлен 12.04.2022Development and active application of automation methods and tools that ensure the creation of Zois with specified high quality indicators with real restrictions on the use of development resources. Diagram of the "Get Function Listing" use case.
статья, добавлен 17.03.2022Technology of iron-concrete products. Optimization of experiment in chemistry and chemical technology. Blocks from rocks for facing, architectural-construction, memorial and other products. Methods of determining water absorption and frost resistance.
статья, добавлен 29.07.2021