Comparison of finite element modeling and analytical approach results for oscillating rod structure with crack
The comparison of natural modes for the first and second transverse oscillation modes obtained by numerical simulation and finite element package of analytical calculation of the core model. The analysis waveforms for different values of the defect.
Подобные документы
Fast fatigue crack growth. The general content of nitrogen in the alloy system that limits fatigue life. Fragmenting the titanium sponge into small pieces and using various melting methods metals. Investigation of the Partially Melted Electrodes.
статья, добавлен 10.12.2018Consideration an alternative, in relation to the widely used "differential" one, "integrated" approach to solving the dynamics problems. Determining the natural frequencies of fluctuations case of the free surface liquid in containers of various shapes.
статья, добавлен 29.11.2016The base of constructing computer model of the analysis of complex physical-chemical phenomena in the process ORIEN in continuous arc furnace is as the main aggregate of energy-metallurgical complex. A mathematical model of physical-chemical processes.
статья, добавлен 02.11.2018Rational modes of printing volumetric samples with a working thickness of the 316L powder layer of 40 μm to achieve a density of volumetric samples/ Determination of the density of metal samples by the metallographic method on an optical microscope.
статья, добавлен 19.03.2024Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022The present study is a mathematical modeling aimed at the dynamic force analysis of printed circuit boards in order to eliminate dynamic stresses to an acceptable level and ensure the strength and reliability of the printed circuit board design.
статья, добавлен 02.06.2022The development of a new functional proposition, which uses the Poisson and Weibull distribution components, to simulate a functional U-shaped function. Estimating the effectiveness of the developed functional representation by numerical examples.
статья, добавлен 12.02.2019Establishment of rational technological modes of processing various types of meat raw materials by needle injection on a multi-needle brine injector. Improvement of technologies and types of specialized equipment for injecting meat raw materials.
статья, добавлен 20.07.2024Offered and analysed of the method of calculating the operating parameters of warping spools and mode of winding. A formula that is obtained allows to define relationship between the parameters of the threads wound on a warping spool and their pull.
статья, добавлен 29.11.2016Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016Two sensor designs of metallic cylindrical resonator Coriolis vibratory gyroscope are analyzed in this work. Resonant frequencies computer modeling results are resented and on their basis gyroscope sensor geometrical parameters choice is validated.
статья, добавлен 14.09.2016The model of spatially distributed curing process of epoxy matrix polymeric composite. The model using the projections of Pareto points set on the 8-dimensional space of design variables. Сontrol synthesis for the closed mould curing of composite spar.
статья, добавлен 30.05.2017Defining and analysis the essence of robot is an automatic device, which has a manipulator – mechanical analogue of human hand, and manipulator control system. Consideration and characteristic of the structural features model of domestic robot–helper.
статья, добавлен 29.01.2016The main criteria for the quality of a pile coating, obtained by electro-floating. Experimental data obtained on a sample of nylon pile used in applying pile coatings by electro-floating method, which prove the efficiency of the proposed method.
статья, добавлен 30.08.2020Estimation of energy release in mills of various types to understand the thermodynamic aspect of processes during mechanoactivation treatment. Modeling the motion of the balls of a mill and evaluating the generation of energy in the ball system.
статья, добавлен 07.08.2020Development of improved methods of calculation to quantify the anodic dissolution process began. Determining factors of electrochemical dissolution of the surface layers of steel, obtained at different process conditions electroerosion machining.
статья, добавлен 30.07.2016Study of structure and properties of aluminum alloys treated with nanodispersed modifiers. Consideration of the classical theory of modification of melts. Creation of fine-grained structure of castings. Analysis of existing aluminum alloy modifiers.
статья, добавлен 21.04.2020The use of the boundary values of parameters of mould displacement of the earth's surface and refining the workings of the design scheme to predict the trajectory of sedimentation. Determination of empirical coefficients of mathematical equations.
статья, добавлен 30.07.2016Various kinds of mathematical models of a snakelike robot motion depending on gait pattern. Simplified model of a snake. The motion sequence of three-mass system. The average velocity depending on number of masses. Determination of optimal masses number.
статья, добавлен 27.08.2020The relation between the particles velocity and the deposition efficiency of material powders. A different approaches for calculating the critical deposition velocity. Computational fluid dynamics model. Critical particle velocity determination.
статья, добавлен 29.11.2016The mixed approach that combines theoretical research, analysis of scientific research with analysis of practical examples, increasing visitor engagement through augmented reality, virtual reality technologies, also encompasses important design aspects.
статья, добавлен 24.06.2024Research of mathematical model of the process intrusion forming polymer products. Establishing a dependency on the angle of melt costs lifting screw injection unit in the material cylinder based on the geometric parameters of extrusion head and mold.
статья, добавлен 18.02.2016Creation and testing of a model of a diesel engine muffler. Plotting a pressure level diagram inside the device. Analysis of the distribution of the sound field. Assessment energy losses of exhaust gases. Estimation of the spectrum and octave bandwidth.
статья, добавлен 10.10.2024Nonaxisymmetric boundary value problem of elasticity theory for multiconnected body with cylindrical boundaries. Boundary conditions by the generalized Fourier method. The numerical analysis of stresses in the areas of their greatest concentration.
статья, добавлен 30.10.2016Familiarity with the basic method of identification of defects of the drive with induction motor using wavelet transform for the test signals. Analysis of a neural network model converted to the next subsequent stages on the basis of the algorithm.
статья, добавлен 28.08.2016