The influence of the main parameters of the SLM process on the density of volume parts
Rational modes of printing volumetric samples with a working thickness of the 316L powder layer of 40 μm to achieve a density of volumetric samples/ Determination of the density of metal samples by the metallographic method on an optical microscope.
Подобные документы
Study of field distribution in structures such as a gold lattice, a graphene layer, and a silicon substrate. Conditions of maximum electromagnetic field distribution by these structures for the purpose of using them in photonics and electronics devices.
статья, добавлен 24.02.2024Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
статья, добавлен 21.12.2016Analysis of the selective adsorbent. Influence of modifying pentasyl group synthetic zeolites (Silicalite-1 and Silicalite-2) with metal cations capable to specific interactions on the separation ability of the chromatographic column has been studied.
статья, добавлен 02.04.2014In this study, porous Ti-Nb-Zr biomaterial which is not included poison elements was successfully fabricated by powder metallurgy using space holder of NH4HCO3 and foaming agent of TiH2. Biocompatibility of porous Ti-Nb-Zr alloys is similar to Ti-6Al-4V.
статья, добавлен 30.07.2016Основные задачи развития общественного питания. Необходимость укрепления материально-технической базы. Технологические требования к конструкции теплового аппарата. Описание устройства и принципа действия пароконвектомата Rational, его преимущества.
курсовая работа, добавлен 26.04.2013Description and analysis of the characteristics of main problems to be solved in design of fixture. Examination and description of the main principles of work with the developed software to automate the modeling process and the design of the led lamp.
статья, добавлен 26.06.2016Motion systems as core technologies, as mechanical systems, like microelectronic manufacturing equipment, are required to achieve high speed and accuracy. The influence of the dynamics of a mechanical system on the quality of the position tracking syste
статья, добавлен 26.08.2020- 58. Development of wide bandgap one-dimensional MOF/TIO2 photonic crystal and its gas-sensing properties
Metal-organic framework materials a type of coordination polymer that have seen breakthroughs in material science over the past decade. Because of their high specific surface area and porosity, they are used for gas adsorption, storage, and separation.
статья, добавлен 10.10.2024 The comparison of natural modes for the first and second transverse oscillation modes obtained by numerical simulation and finite element package of analytical calculation of the core model. The analysis waveforms for different values of the defect.
статья, добавлен 29.06.2017Grinding machine and its use for finishing workpieces, which must demonstrate high surface quality and high accuracy of shapes and sizes. Roughing operations in which grinding removes large volumes of metal fairly quickly. The components of machine.
статья, добавлен 10.03.2019Consideration of the problems of energy conservation and management of production costs at metallurgical enterprises. The necessity of carrying out an energy-resource-saving policy of metal producers has been substantiated; directions of energy saving.
статья, добавлен 30.09.2021Integration of the R.I. 01 industrial robot into the working system of the BB-01 flexible line. Operational and design features of the R.I. 01 loading robot. The central spindle of the system. The horizontal frame holding the arm of the loading robot.
статья, добавлен 25.10.2010Using transmission electron microscopy methods the layer by layer analysis of the bulk hardened superior quality rails is carried out, phase state and defect substructure gradients are established. Character of changing of structure-phase states.
статья, добавлен 30.07.2016Характеристика программ, используемых в разработке системы предупреждения гидратообразования в скважине: Rational Soda, Rational Clear Quest. Определение атрибутов системы и анализ интеграции модели. Разработка документации для технологического процесса.
курсовая работа, добавлен 12.02.2010Determination of the rolling parameters that allow obtaining a bimetallic ribbed bar. Familiarization with the shape and dimensions of the round ribbed finished pass and of the bimetallic flat oval band obtained in numerical modelling - cross-section.
доклад, добавлен 24.12.2014A new concept of Artificial Neural Networks in estimating speed and controlling a separately excited DC motor. A three-layer feed forward neural network with sigmoid activation functions in the input and hidden layers and purelin in the output layer.
статья, добавлен 22.08.2017- 67. The influence of modified methyl cellulose on the main properties of expanding cementing slurries
The effect of modified methylcellulose on the main properties of expanding cementing slurries. When cementing low-temperature wells, expanding cementing slurries based on a mixture of Portland cement (70-75% PCT-I) and gypsum alumina cement (30-25% GAC).
статья, добавлен 04.09.2024 Learning algorithm of consistent actions to obtain quality coatings made by the complex technological method electrocontact strengthening of sprayed coatings. Analysis Ishikawa diagram which allows identify the causes of the impairment coatings obtained.
статья, добавлен 29.01.2016Dynamic designer as a way to save time and cost of getting new products to market, and improving old ones without a huge investment in equipment. Using parametric solid models for to develop the form of the parts. Mechanical desktop to build prototypes.
презентация, добавлен 21.02.2014- 70. The influence mechanism of ferrite grain size on strength stress at the fatigue of low-carbon steel
The study of the properties of low carbon steel. Methods of cold plastic deformation. The rationale for the recommended annealing temperature. Is the microstructure of low-carbon metal. The study of the conditions of plastic deformation of ferrite.
статья, добавлен 29.01.2016 General characteristics of the hydrostatic spindle for ultraprecision double-sided machining. Familiarity with the main features and problems of modern engineering development. Consideration of ways to ensure quality indicators of machining parts.
статья, добавлен 20.07.2020Establishing conditions for quality surface finish in grinding abrasive wheel. Determine the optimal mode grinding, allowing you to get the highest performance and lowest cost processing, providing the necessary tech-tech requirements for machine parts.
статья, добавлен 14.09.2016Comparison of two non-conventional processes which are laser and photochemical machining. The formation of complex shapes in metal sheets. Chemical etching of the material for the manufacture of the desired finished product by a controlled corrosion.
статья, добавлен 03.12.2015The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022Creating Levi Strauss jeans in a working quality clothing for farmers. Features tissue, characteristic for trousers. Popularity of jeans among young people. A patent to a production of "workers in overalls strapless with pockets for knife and money".
презентация, добавлен 14.03.2017