Estimation of noise equivalent power and design analysis of an andreev reflection hot-electron microbolometer for submillimeter radioastronomy
Andreev reflection microbolometer with a SIN-junction as the microthermometer. Replacement of the microthermometer based on SIN-junction with a microthermometer based on superconducting transition-edge sensor. Microbolometer sensitivity evaluation.
Подобные документы
Method of forming the sensitive elements of sensors magnetic field as a spinvalve type multilayer structures based on Co and Cu. The study their magnetoresistive properties. Calculation of the magnetic sensitivity of the samples with a fixed thickness.
статья, добавлен 30.07.2016Development of superconducting single photon detector, performance improvement. The characteristic of SSPD, built into the optical resonator and providing its illumination from the front. Expansion of the wavelength range due to ZBLAN fluoride fibers.
статья, добавлен 03.11.2018A method of in-situ calibrating 3D magnetic sensors based on Hall devices that have linear field characteristics and are non-orthogonal, with known position of each Hall device in relation to the 3D sensor’s substrate. The method’s efficiency is proved.
статья, добавлен 20.01.2017Study of the main problems with heating and ways to resolve them. Review of computer design, methods and techniques used in it, performance analysis. Analysis of possible universal approaches to the automated design of a heating system using a heat pump.
статья, добавлен 14.09.2016The modern methods of evaluation time for study electronic devices for low-level noise. Qualitative determination of reliability characteristics. Performance evaluation of monitoring tools of electronic products by the level of low-frequency noise.
статья, добавлен 21.06.2016The potential of using smartphone sensor data (accelerometer and compass) in order to track the location of the person holding the device using dead reckoning algorithms. Two approaches - assess their performance in different real life inspired scenarios.
статья, добавлен 23.06.2016The method for assessing a channel capacity and productivity of fiber-optic communication line (FOCL) based on the DWDM technology is proposed. The interrelation between noise-immunity factors and information characteristics of FOCL is highlighted.
статья, добавлен 07.12.2016- 8. Research on noise reduction technology of blade-icing signal based on acoustic emission technology
Using wavelet analysis with five-level decomposition to suppress noise in the signal of icing of wind turbine blades using acoustic emission. Extraction of information about the presence of icing using the signal energy at the second decomposition level.
статья, добавлен 30.08.2021 The design of control system compensation inactive components for powerful sounding pulses generator using fuzzy logic based decision structure and implementation using the 68HC12 microcontroller. Description software design in program Fuzzy Tech.
статья, добавлен 30.10.2016Development of a method of transmission based on systems with decision feedback and the timer signal designs with the fix part of the error interval of the "good" state equation as. The definition of the boundary conditions of its use and effectiveness.
статья, добавлен 26.03.2016The higher frequency bands in satellite telecommunication systems and in astronomy. Design of the Orthomode Transducer. The Optimized Right-Angle Coaxial Junction. Problem of development of multiband feeds for reflector an-tennas in wide frequency ranges.
статья, добавлен 27.07.2016- 12. Plane wave diffraction by two-dimensional gratings of inductive and capacitive coupling elements
Frequency selective structures in the form of two-dimensional gratings with non-resonant elements are investigated. Expressions the main for the reflection and transmission coefficients for the gratings consisting of thin metal rectangles are obtained.
статья, добавлен 04.11.2018 The design of cleanroom management systems. Development of a system that includes a sensor subsystem to monitor all parameters of a cleanroom. Creating and maintaining a set of requirements for cleanliness, temperature, pressure, humidity in the process.
статья, добавлен 14.09.2016Analysis of optimal control. Implementation of a digital autopilot capable of providing the position of aircraft step. Optimization of the determination of the parameters of the digital PI controller, necessary for stabilizing the position of the pitch.
статья, добавлен 22.12.2016The channel utilization factor is a typical quality of service functional model of a telecommunication network. This paper introduces an approximation of the QoS functional model based on regression analysis and performed via differentiable functions.
статья, добавлен 07.12.2016Familiarization with the scheme of passive and active transducer with mode of preset voltage. Characterization electric models of capacitive sensors at alternating current. Analysis of electrophysical parameters monitoring of nonelectric products.
статья, добавлен 30.01.2016- 17. Study of transmission lines effect on the system operationon of continuous automatic cab signalling
Investigation of the influence of the electromagnetic field of high-voltage power transmission lines on railway chains and continuous automatic cockpit signaling. Development of methods for increasing the noise immunity of the automatic control system.
статья, добавлен 29.09.2016 Development and practical approbation of the methodology for designing hybrid neural networks. Analysis of the effectiveness and conditions of use of this technique. Research and evaluation of the possibility of using input signals of different types.
статья, добавлен 14.09.2016The new morphological filter (NMF) algorithm for noise reduction in satellite TV picture. Concept of the NMF filter. Flow chart of the filtering process. Fine details preservation. Edges preservation evaluation. The hardware implementation of the NMF.
статья, добавлен 07.11.2018A broadband coherent orthomode converter based on a coaxial four-ribbed waveguide for a frequency band of 3.4-5.4 GHz was developed. Each element of the design was separately optimized with CST Microwave Studio. Final modeling of characteristics.
статья, добавлен 29.09.2016Research and characterization of features of the method of information transfer using perfect binary arrays, which is based on their structural and correlation properties. Transmission of discrete digital messages by means of cyclic wideband signals.
статья, добавлен 30.07.2016Familiarization with the concept of field-effect transistors. Laying out circuit boards and mounting RF devices. Classes of operation, forms of modulation, biasing, and operating in a pulse mode. The basic factors affecting low power amplifier design.
учебное пособие, добавлен 25.11.2013Presents new and improved method of marking speech signals. The method is based on the use condition Gelder for the speech signal spectrum. Features of the method are its accuracy during decoding of the watermark and independence from the source data.
статья, добавлен 20.01.2017Diagram of the energy spectrum and impurity states for doped PbTe-based alloys. Temperature dependence of the relative resistance for PbTe(In) films. Photoelectric instabilities in a film induced by a combined effect of illumination and slight heating.
статья, добавлен 28.06.2013Especially the use of measuring instruments for the diagnosis of energy system models that represent the stationary states in the second and third stages of the transition process. Usage of PMU for diagnostics of power system's mathematical model.
статья, добавлен 23.06.2013