Analysis of electron-optical studies of experimental alloys of Fe-W and ferrotungsten
The comparative analysis of the microstructure, phase and chemical composition of the experimental alloys of the Fe-W type with the standardized grade ferrotungsten. The feasibility of using Fe-W for the manufacture high tungsten materials based on iron.
Подобные документы
Square Lead-Rubber Bearings with four lead plugs to round Lead-Rubber Bearings with one lead plugs and shorten the analysis time. Comparison of load-deformation relationship. Comparison of the change in the outer edge temperature of the laminated rubber.
статья, добавлен 10.10.2021Types of the combined mechanisms of simultaneous turning and folding blades, which can be stabilized the frequency of rotation of horizontal-axis wind turbines. Analysis of the dependence of the adjusting movement of the slide from rotation angles.
статья, добавлен 27.10.2016The analysis of the cement production process in Ghana, which is limited to grinding clinker into cement and its packaging and distribution. The equipment of grinding chains, the best configuration. Control methods used for cement grinding chains.
статья, добавлен 30.05.2018Experimental improvement of the stability of the bolt connection of the technological and power modules of the new design of the modular machine-tractor unit. The new construction of the pivot connection of the technological module with the power module.
статья, добавлен 10.08.2022Technological parameters (thermal loss, cooking time, etc.) grilling the second meat dishes. Use marinades based on vegetable oil and vinegar as the most common. The composition of the marinade with yogurt and kiwi. The energy value of ready meals.
статья, добавлен 25.12.2016Optical properties of nanocomposites are important and useful in their consumer satisfaction capacities. In this research, coloration properties of dyed PA6/Nano TiO2 nanocomposite is studied using a combined Mie and Kubelka-Munk light scattering theory.
статья, добавлен 30.07.2016A resource-saving technology complex processing of highly mineralized mine waters of mining enterprises of the Kryvyi Rih iron ore basin has been developed. Of all the known methods of water desalination, the only method in this case is reverse osmosis.
статья, добавлен 26.12.2023The study of the Microbiology of the procedure of biological fermentation, physico-chemical characteristics of activated sludge of the Bortnichy station of aeration. Offer possible ways to increase the speed of the procedure of biological fermentation.
статья, добавлен 27.11.2016Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.
статья, добавлен 02.06.2014The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022Study of the main tasks of industrial enterprises. A number of key factors affecting production. Ways to ensure production of high-quality products necessary for society, ways to improve production indicators based on increasing production efficiency.
статья, добавлен 26.02.2023Justification of the status of the time-projection camera as the main track detector and charged particle identification detector in the new multifunctional detector of the Collider-type heavy ion particle accelerator complex based on the Nuclotron.
статья, добавлен 20.05.2020The use of metallic pigments with features of the geometry of the surface of printing materials. Functionality of the "Materials Editor" program and a group of parameters of geometric surface structures. Assessment of surface structures in the 3D system.
статья, добавлен 12.06.2023The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016The elemental composition of the developed gerodietetic dry soluble product for enteral nutrition. The satisfaction level of older age group representatives average needs in mineral elements basing on the developed product in ready for usage liquid form.
статья, добавлен 14.02.2022Grinding machine and its use for finishing workpieces, which must demonstrate high surface quality and high accuracy of shapes and sizes. Roughing operations in which grinding removes large volumes of metal fairly quickly. The components of machine.
статья, добавлен 10.03.2019Описание инновационной технологии высокоскоростного резания High Speed Cutting. Область применения HSC. Режимы резания для традиционной и высокоскоростной обработки. Сплавы и параметры режущих инструментов. Тепловая нагрузка, способы охлаждения.
статья, добавлен 30.01.2018Gathering of materials about a petroleum industry in a museum creates favorable conditions for their protection. The assemblage of materials is stored In a museum about the factory "Brothers Nobel". The oil extracted by brothers Nobel in 1894-1903.
статья, добавлен 03.03.2018Characteristics of an automated traffic management system based on the use of neural networks. Description of the mathematical model of the intersection. The strategy of motion control using a neurocontroller, based on the multilayer perceptron.
статья, добавлен 22.12.2016Extraction of lithium using highly selective inorganic ion exchangers. Composite matrix-isolated flocculants-coagulants. Matrix isolation method is one of the directions of nanotechnology. The technology of application functional nanocomposite materials.
статья, добавлен 31.10.2017Directions of development of production technology of high-precision parts. Research in the field of management precision and quality parameters of the treated surface. Improvement of the technological process, equipment, instruments and devices.
статья, добавлен 06.12.2016Rheology of high-viscosity marine fuel, temperature conditions of fuel preparation in ship power plant. The relationship between objects, environment and fuel quality of the fuel spray. Influence of variable electric fields for high-viscosity marine fuel.
статья, добавлен 28.09.2016The relationship between the research of technology and sound. The history of the creation of the first electronic music synthesizer. Standardization of the keyboard, the role of users of technology. Sound creation technologies, performance practices.
статья, добавлен 21.11.2021Characteristics of jet fuels: general information and properties. Fractional composition: initial boiling point and 10% fuel distillation temperature, 50% fuel distillation temperature and temperature of 90 % fuel distillation (t90) and dry point.
контрольная работа, добавлен 06.12.2014