Influence of chemical compounds on the forming of welding arc
Comparative analysis of the effect of chemical compounds on the process of forming an electric arc and the conditions for its combustion.Metal transfer in the interelectrode gap under experimental conditions. Specific power of electric arc discharge.
Подобные документы
The study of the Microbiology of the procedure of biological fermentation, physico-chemical characteristics of activated sludge of the Bortnichy station of aeration. Offer possible ways to increase the speed of the procedure of biological fermentation.
статья, добавлен 27.11.2016Using and improvement of qualities of products of oil processing. The process of obtain a water-soluble colloidal sulfur with seating stability, good solubility in water, high biological activity. Selection of conditions to receiving polymeric products.
статья, добавлен 11.03.2019Rational modes of printing volumetric samples with a working thickness of the 316L powder layer of 40 μm to achieve a density of volumetric samples/ Determination of the density of metal samples by the metallographic method on an optical microscope.
статья, добавлен 19.03.2024Построение системы автоматического управления с применением распределенных регуляторов и согласованного адаптивного управления дробильно-измельчительным комплексом горно-обогатительного комбината на базе промышленных контроллеров Schneider Electric.
статья, добавлен 30.07.2016- 30. The influence mechanism of ferrite grain size on strength stress at the fatigue of low-carbon steel
The study of the properties of low carbon steel. Methods of cold plastic deformation. The rationale for the recommended annealing temperature. Is the microstructure of low-carbon metal. The study of the conditions of plastic deformation of ferrite.
статья, добавлен 29.01.2016 Technology of iron-concrete products. Optimization of experiment in chemistry and chemical technology. Blocks from rocks for facing, architectural-construction, memorial and other products. Methods of determining water absorption and frost resistance.
статья, добавлен 29.07.2021Experimental researches of improvement of technology of preparation of preparation Torasemide 5 mg / ml a solution for injections, a choice of a filtering material. Aseptic production conditions using sterile filtration and thermal sterilization.
статья, добавлен 01.12.2017Appointment, device and action of the turning machine. Types of lathes, depending on the application. Metal processing on machine tools, turning operations. The use of water energy to drive. The principle of operation of the hydroelectric station.
статья, добавлен 11.03.2019Use of selective solvents in oil refining industry. Methods of cleaning oil raw materials. Technology of fractionation of extracts of phenol distillates, their chemical properties. Modeling the column of industrial extraction of petroleum products.
статья, добавлен 10.08.2018The work of complex heat-recovery systems using water-hiting and air-heating heat-recovery exchangers was investigated. The combined use recovered heat to heat the return heat-network water, water of chemical water-purification system or combustion air.
статья, добавлен 22.04.2021- 36. Development of wide bandgap one-dimensional MOF/TIO2 photonic crystal and its gas-sensing properties
Metal-organic framework materials a type of coordination polymer that have seen breakthroughs in material science over the past decade. Because of their high specific surface area and porosity, they are used for gas adsorption, storage, and separation.
статья, добавлен 10.10.2024 Theoretical studies allow developing a theoretical substantiated method for calculating the stability of spray vortex countercurrent mass transfer device. Review and characterization of the effect on the drop centrifugal force and resistance forces.
статья, добавлен 14.07.2016- 38. Chemical modification of aminopolysaccharide from shrimp shell by direct connection with polyaniline
Modification of aminopolysaccharide by deacetylation of chitin from the shrimp shell using the enzyme as a biocatalyst and microwave energy. The influence of temperature and reaction time, the ratio of aminopolysaccharide to aniline on its properties.
статья, добавлен 10.08.2020 The model of the disperse material behavior under vibration in the hole of the dispenser based on the Navier-Stokes equations. The influence of the power factor on the movement of the product and the parameters of the hole on the vibrating dosing process.
статья, добавлен 14.09.2016Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016The analysis of fire-resistant intumescent coatings, which are currently used in Ukraine and abroad, as well as prospects for the development of new intumescent coatings with improved properties, is carried out. Methods of fireproofing metal structures.
статья, добавлен 13.11.2023Research of mathematical model of the process intrusion forming polymer products. Establishing a dependency on the angle of melt costs lifting screw injection unit in the material cylinder based on the geometric parameters of extrusion head and mold.
статья, добавлен 18.02.2016The study of structural changes during hot deformation metal during controlled rolling. The influence of preheating temperature and deformation degree on the size and shape of austenite grains. The definition of the polygonal structure of the austenite.
статья, добавлен 30.01.2017Research microstructure Rodent dental alloy based on Ni-Cr-Mo after casting in a vacuum furnace. Chemical analysis of crystallographic orientation and topography. Bold molybdenum carbides, eutectic-P and particles of aluminum oxide within dendrites.
статья, добавлен 23.02.2016The conductive nanocomposite films on the basis of reactionary copolymers received. The threshold of their percolation is determined. It was shown that its value depends on the size of specific surface of nanotubes and conditions of composite obtaining.
статья, добавлен 23.09.2016During the development of natural resources of people actively in contact with unfavorable environmental conditions. It concerns the use of floating means. To reduce the adverse effects of environment requires the design of products for special purposes.
статья, добавлен 25.11.2016- 47. Principles of calculation of piezoelectric elements with surfaces partial covering by electrodes
Description of stress-strain state and transfer characteristics of piezoelectric elements with partial surfaces electrogalvanism. The power method of the analysis of the physical condition of the piezoelectric elements in the mode of forced oscillations.
статья, добавлен 30.08.2016 Development of improved methods of calculation to quantify the anodic dissolution process began. Determining factors of electrochemical dissolution of the surface layers of steel, obtained at different process conditions electroerosion machining.
статья, добавлен 30.07.2016Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016Polytetrafluoroethylene as one of the promising polymers for tribotechnical purposes. The use of polysulfonamide fiber to increase the wear resistance of polytetrafluoroethylene under conditions of friction without lubrication in reciprocating motion.
статья, добавлен 11.08.2021