Research technique for subcritical crack extension in adhesive joints
Analysis of the main causes of destruction of adhesive joints. Structural and technological stress concentrators, because of which cracks develop during operation. General characteristics of the resistance of adhesive bonding to failure at all stages.
Подобные документы
Analyzed the impact of long-term operation of gas pipelines, as well as natural stress concentrators on the physico-mechanical properties of welded joints of steel 17G1S. Regularities of the destruction of the material of welded joints of gas pipelines.
статья, добавлен 30.01.2016Investigation of adhesive compositions based on polychloroprene for the adhesion of rubber soles to the tips of the skin. Determination of the adhesion strength of the adhesive film when stretched as the hardener content of the adhesive is increased.
статья, добавлен 21.12.2016The method of reducing costs and increasing the strength of threaded joints, which are currently used in every field of human activity. Experimental research on the relation between thermal treatment and strength of adhesively sealed joints was con
статья, добавлен 28.09.2016Model for calculation of nominal stresses in characteristic points of the surface fatigue crack to the tubular shaft in bending with rotation. Reasons for the decrease of the propagation velocity of cracks in the center and changing the geometry.
статья, добавлен 28.09.2016The main stages of the automatic assembly of cylinder connection. The structural elements of the flexible automated production. Prospect for the automation of machine building production. The main types of heat exchange in technological systems.
контрольная работа, добавлен 05.04.2016Reduce costs and increase durability of threaded connections. The relationship between the thermal treatment and the strength of the threaded connection. Compare the minimum tightening hermetic threaded connections three types of anaerobic adhesives.
статья, добавлен 28.09.2016Fast fatigue crack growth. The general content of nitrogen in the alloy system that limits fatigue life. Fragmenting the titanium sponge into small pieces and using various melting methods metals. Investigation of the Partially Melted Electrodes.
статья, добавлен 10.12.2018Discussing an innovative technology for fault detection of the pipelines transportation. Study and characteristic repeated correlation of the above structures with kinematic diagram of failure, which make for adequate predicting the remaining life.
статья, добавлен 02.11.2018- 9. Structural and electro-physical properties of heterogenous film materials based on refractory metals
Structural phase composition analysis of heterogenous film materials based on refractory metals is presented. A thermal activity nature of their conductivity was determined. Of investigation were estimated thermal resistance coefficient and energy.
статья, добавлен 30.07.2016 Consideration the processes taking place in the metal pipe during prolonged use. Studing the complex physical and mechanical properties to assess the resistance to the destruction of the metal in the environment closest to the operating conditions.
статья, добавлен 30.01.2016Transit of natural gas along the territory of Ukraine to the countries of the Western and Central Europe. Main resons of the loss of pipeline efficiency. Necessity for studying of the operation modes of the gas transport system during underloading.
статья, добавлен 01.12.2017Structure of three-cone rock bit with inserted hard-alloyed rock-destruction and protecting equipment, in which the chief components are marked. The minimally possible set of operators, which support qualitative performance of technological process.
статья, добавлен 14.09.2016- 13. Polyphenol composition and technological characteristics of the coloured whey from various origin
The purpose of this scientific work was to determine the polyphenolic composition and technological characteristics of colored whey of various origins, obtained by coagulation of milk proteins with traditional berry raw materials and wild herbs.
статья, добавлен 10.06.2022 Strength is assumed - index for materials which can take standard, calculated values. Significant dependence between bending resistance, absolute size of structural elements. The structure of the wood fibers - factor which determine timber quality.
статья, добавлен 25.12.2016The need to design new drilling equipment. The analyzed existing options for solving the problem solve it to some extent. To eliminate them, it is proposed to use elastic elements (ring springs) in the construction of double-shoulder tool joints.
статья, добавлен 02.03.2021Theoretical studies allow developing a theoretical substantiated method for calculating the stability of spray vortex countercurrent mass transfer device. Review and characterization of the effect on the drop centrifugal force and resistance forces.
статья, добавлен 14.07.2016Familiarization with layout of placement of guard signaling complex systems. Research technology of modeling discrete continuous stochastic systems. Characteristics of the main methods ensuring probability of successful fulfilment of seismic sensor.
статья, добавлен 30.01.2016Description and analysis of the characteristics of main problems to be solved in design of fixture. Examination and description of the main principles of work with the developed software to automate the modeling process and the design of the led lamp.
статья, добавлен 26.06.2016The investigation is focused on the evaluation of residual stresses resulting from cold deformation and welding in candidate target structural materials such as martensitic Alloys EP-823 and HT-9, and also an austenitic Type 304L stainless steel.
магистерская работа, добавлен 14.02.2013Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016Results Global Capstone Design Workshop in order to find eco-friendly, energy-saving methods in our daily lives and to develop and improve them. In particular, selecting topics based on practical methods for Global Capstone Design will be the main focus.
статья, добавлен 20.09.2021Creep and fatigue in polymer matrix composites. Stages, characteristics and deformation of creep. Mechanisms of creep. General creep equation. Dislocation, nabarro-herring, coble creep. Creep of polymers, of concrete. The molecular weight of the polymer.
курсовая работа, добавлен 02.02.2015The methodical approach that is aimed at the efficient use of existing fixed assets and technological innovations introduction. Technical and technological components of the technological machine-building enterprise "Turbomash Ltd" development.
статья, добавлен 26.08.2016Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016- 25. Principles of calculation of piezoelectric elements with surfaces partial covering by electrodes
Description of stress-strain state and transfer characteristics of piezoelectric elements with partial surfaces electrogalvanism. The power method of the analysis of the physical condition of the piezoelectric elements in the mode of forced oscillations.
статья, добавлен 30.08.2016