Influence of gas transport volumes reduction on gas pipeline stress state
Transit of natural gas along the territory of Ukraine to the countries of the Western and Central Europe. Main resons of the loss of pipeline efficiency. Necessity for studying of the operation modes of the gas transport system during underloading.
Подобные документы
Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022Combined heating - a modern way of organizing the heat supply of the house. Use of independent sources of thermal energy. The advantages of using solar collectors. The principle of operation of the stove, fireplace insert. Types of combination boilers.
доклад, добавлен 14.03.2019System for billet continuous caster’s mould heat engineering parameters monitoring. Formation of the internal heat transfer surfaces. Calculation the indicators: average heat flux density, overall heat exchange coefficient. Effective gas gap thickness.
статья, добавлен 30.01.2016The investigation is focused on the evaluation of residual stresses resulting from cold deformation and welding in candidate target structural materials such as martensitic Alloys EP-823 and HT-9, and also an austenitic Type 304L stainless steel.
магистерская работа, добавлен 14.02.2013Nanocomposites comprising ray in a polymer. The reflection mechanical properties material. Increasing the polymer properties by forming the interphase. Obtaining curves of stress-strain states of macroscopic samples irradiated polymer materials.
статья, добавлен 30.07.2016Innovative approaches that would improve the conceptual solutions of service robots and their operation in the application space. Involvement of robotics with different conceptual solutions for their mobility. Application of the wheel chassis principle.
статья, добавлен 28.08.2020Appointment, device and action of the turning machine. Types of lathes, depending on the application. Metal processing on machine tools, turning operations. The use of water energy to drive. The principle of operation of the hydroelectric station.
статья, добавлен 11.03.2019Introduction of new and innovative solutions for robotic devices. Application in production of the special individual decision on assembly operations. Execution of the assembly process with the introduction of two-handed robot in the assembly process.
статья, добавлен 28.08.2020The sustained propagation of combustion fronts in porous media is as a condition for the success of in situ combustion for oil recovery. The analysis of a method for modeling the propagation of combustion fronts in porous media. Problem of loss of a heat.
статья, добавлен 20.05.2013The model is based on a regional convolutional neural network architecture that can identify and classify different types of damage, including those caused by natural disasters, accidents, or deliberate warfare attacks, such as shelling and bombardment.
статья, добавлен 12.12.2024The model is based on a regional convolutional neural network architecture that can identify and classify different types of damage, including those caused by natural disasters, accidents, or deliberate warfare attacks, such as shelling and bombardment.
статья, добавлен 12.12.2024Defining features of the motion of moving the controls in vibroudarnogo qualifier. Analysis of the effectiveness and efficiency of processing of minerals. Creating an analytic function, which could describe the trajectory of the mass center of the rink.
статья, добавлен 24.02.2016Theoretical studies allow developing a theoretical substantiated method for calculating the stability of spray vortex countercurrent mass transfer device. Review and characterization of the effect on the drop centrifugal force and resistance forces.
статья, добавлен 14.07.2016The mode of longitudinal motion of attached underwater vehicles under the action of propulsors is considered. Analysis of experimental data of design variants of models and natural objects. The behaviour of the devices in the aqueous environment.
статья, добавлен 15.02.2021Class of application of heat pumps in industry. Review of the carbon dioxide heat pump in the transcritical cycle of operation according to the expander-ejector scheme. Development of methods for selecting control valves for a given heat pump circuit.
статья, добавлен 02.02.2019These developments are devoted to the use of sol-gel processes in various branches of science and technology. Based on inorganic ion-exchange materials, a technology was developed to extract lithium from natural brines, which are poor in lithium content.
статья, добавлен 31.10.2017During the development of natural resources of people actively in contact with unfavorable environmental conditions. It concerns the use of floating means. To reduce the adverse effects of environment requires the design of products for special purposes.
статья, добавлен 25.11.2016Consideration an alternative, in relation to the widely used "differential" one, "integrated" approach to solving the dynamics problems. Determining the natural frequencies of fluctuations case of the free surface liquid in containers of various shapes.
статья, добавлен 29.11.2016Types of Electric Vehicle in use Today. Alternative and Novel Energy Sources and Stores. Electric Machines and their Controllers. Motor Cooling, Efficiency and Mass. Design of Ancillary Systems. Battery powered cars and vans. Torque speed characteristics.
книга, добавлен 25.11.2013- 95. Strength characteristics of a composite laminate with a center hole under biaxial tensile loading
The developing of a useful model dealing directly with biaxial loading of composite plates with stress concentrations, which can be called progressive damage model. Progressive damage model was utilized to analyze the damage evolution of specimen.
статья, добавлен 18.01.2021 - 96. The Impact Analysis of Breakthrough Technologies on the Development of Russian Oil and Gas Companies
Studying the process of developing and disseminating disruptive technologies. Additive manufacturing or 3D printing. Artificial intelligence and virtual reality. A glimpse into the future of science, technology and business - 35-year perspective.
дипломная работа, добавлен 11.09.2020 Obtaining complex fertilizers by oxidation of Angren brown coal with a mixture of nitric and sulfuric acids and decomposition of oxidation products with a mineralized mass and slime phosphorite of the Central Kyzyl Kum. Fertilizers' commercial properties.
статья, добавлен 27.01.2021The relation between the particles velocity and the deposition efficiency of material powders. A different approaches for calculating the critical deposition velocity. Computational fluid dynamics model. Critical particle velocity determination.
статья, добавлен 29.11.2016The need to design new drilling equipment. The analyzed existing options for solving the problem solve it to some extent. To eliminate them, it is proposed to use elastic elements (ring springs) in the construction of double-shoulder tool joints.
статья, добавлен 02.03.2021The study of the formation mechanism of flavonoid complex with aluminum ions. On the basis of the negative low Gibbs free energy values it found that chelation is a natural phenomenon. Determination of the antioxidant capacity of flavonoids stevia leaf.
статья, добавлен 30.01.2016