Functions fillers and additives for polymers
Chemical identification of polymer additives and its significance for links in the plastics supply chain. The effect of additives on the properties of materials and on the cost of production of polymers. Quantitative determination of polymer additives.
Подобные документы
The using nickel powders as electrode materials in multilayered ceramic capacitors. Development of technology of Ni/NiO nanopowders obtaining with particle size of 20 nm and minimal impurities content. The analyses of powder microstructure the products.
статья, добавлен 30.07.2016Control of the stability of calibration characteristic Algorithm of operational control of the error of determination of ammonium ions in drinking water. Photocolorimetric determination of ammonium ion content. Precautions when performing the analysis.
реферат, добавлен 19.06.2022Ag-Ni alloy films were electrodeposited from an ammonia solution on copper substrates at various material ratios and current densities. Investigation of electrical conductivity and pH, formation of complexes with silver and nickel. X-ray diffraction.
статья, добавлен 16.01.2021Platinum as a chemical element, six it naturally occurring isotopes. History of the discovery of this metal. Use as precious metal. Industrial applicability alloys containing platinum in catalytic converters, laboratory equipment, dentistry equipment.
презентация, добавлен 27.10.2014A new universal method of estimating the chemical shifts values of the methylene groups. Change the values of 1H and 13C each methylene group in the result of the conversion by replacing the long fragments –(CH2)K– and –(CH2)I– of the Vice alculated.
статья, добавлен 23.02.2016The environmental pollution as a phenomenon of great concern worldwide. Industrial wastewater samples. Biosorption experimental procedure. System design laboratory. Chemical and physical measurements. The efficiency of laboratory design, main results.
статья, добавлен 10.03.2018The concept and essence of polyaniline. Research of mats made of polylactic acid and polyaniline, their production by electroforming. Identification of the advantages of using a scanning electron microscope. Electrical conductivity of the resulting mats.
статья, добавлен 15.01.2021The basic properties of alkoxides. Production technology of alkali metals alkoxides. Direct Synthesis in the Interaction of Metal and Alcohol. Interaction Metals Oxides and Hydroxides with Alcohols. Exchange reactions with alcohols, transesterification.
статья, добавлен 28.07.2017Study films of CdxZn1-xTe solid solution, obtained by a close-spaced vacuum sublimation technique under different temperatures of glass substrate by energy dispersive analysis of X-rays, scanning electron microscopy and X-ray diffraction methods.
статья, добавлен 30.07.2016Depth profiles of the near-surface region and chemical composition for amorphous films deposited from Ge33As12Se55 bulk glasses and their changes resulting ageing under ambient conditions have been studied by the methods of Auger electron spectroscopy.
автореферат, добавлен 02.04.2014Investigations of nanoporous carbon materials from organic raw materials of vegetable nature appropriate to be used as an electrode component in supercapacitors with an aqueous electrolyte. Familiarization with voltammograms of experimental samples.
статья, добавлен 30.07.2016The technology of obtaining and comparative tests of the medical enterosorbents, activated coal and lignin enterosorbents. High activity lignin enterosorbents at the treatment of lacto-dependent diarrhoea. Physical-chemical features of enterosorbents.
статья, добавлен 02.04.2014The study of the effect of structural relaxation on the basal-plane conductivity of heavily high-Tc single crystals. Increased oxygen deficiency, increased localization effect. The transition metal–insulator transition point toward higher temperatures.
статья, добавлен 02.12.2016Electrodeposition of cobalt-silver and cobalt-tungsten alloys from citrate electrolyte. Characteristic of their catalytic and anticorrosive properties. Effect of the ratio of the electrolyte components depending on the composition of the cobalt alloy.
статья, добавлен 30.08.2016Analysis, synthesis and properties of six isomeric heterocyclic systems containing two fused rings of pyridine with different relative positions of the atoms of nitrogen - naphthyridines. Physicochemical properties and reactivity of naphthyridines.
дипломная работа, добавлен 05.03.2013Treating the properties of oxidized activated carbon KAU by different temperatures in inert atmosphere were studied by means of DTA, Boehm titration, XPS and AFM methods and their catalytic activity in hydrogen sulphide oxidation was established.
статья, добавлен 04.04.2014Identification of Ca2+/calmodulin-dependent phosphorylation sites of scaffold ITSN1 by tandem mass spectrometry. An endocytic scaffold protein, functions of the synaptic transmission. The opportunities of Ca2+/calmodulin-dependent phosphorylation.
статья, добавлен 27.03.2016Hierarchical structure and multi-level organization of cellulose. Preparation of cellulosic nanomaterials. Mechanically-induced deconstructing strategy. Cellulose properties (mechanical, thermal, and barrier) that change during nanoscaling process.
статья, добавлен 13.04.2022Natural zeolite clinoptoline and its nanomodified forms have been used for modification of structures of the composite building materials. Characteristics of this zeolite have been studied by thermal analysis, IR spectroscopy, and adsorption methods.
автореферат, добавлен 02.04.2014To study antimicrobial properties of the synthesized surfactants, the method of consequent dilution was used. The experiments were carried out in the test tubes contained a surfactant at different concentrations and 1 ml of the physiological solution.
статья, добавлен 03.03.2021Determine the optimal parameters of synthesis and base properties of nano-tubular crystals Mg-Ni chrysotiles. temperature ranges and pressure for the synthesis of nano-tubular crystals all synthesed chrysotile at the time of isothermal exposure.
статья, добавлен 30.07.2016Characteristics of the methods of improving the electrical properties, the proper maintenance alloys for electrical purposes. Analysis of the influence of heating temperature on microhardness of the types foreign made Aluminium-Zirconium alloy wires.
статья, добавлен 25.12.2016Development of a new approach to the simultaneous determination of two reducing agents, which is based on the dependence of the rate of their reaction. Automation of the method using a typical device of the method of sequential injection analysis.
статья, добавлен 30.10.2016Sulfur - substance that be in the most kinds of steel. Research of influence of ladle furnace reductants in the desulfurization process. Control ultra-low sulfur steel. The chemical degassing in the ladle furnace-vacuum. Maintaining a low sulfur content.
статья, добавлен 30.01.2016Phase analysis and the crystal structure of the compounds has been investigated by means of X-Ray analysis. Magnetic properties of two synthesised compounds were investigated revealing paramagnetic behaviour in whole investigated temperature range.
статья, добавлен 20.07.2022