Mathematical model of dynamic processes during friction hardening of flat surfaces
Characteristics of mathematical model of dynamic processes that occur in frictional hardening of flat surfaces of machine parts with use of the tool with the cut transverse grooves on its working parts. Cyclic circuit of the machine’s oscillations.
Подобные документы
Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021Analysis and comparison of the different rotor type permanent magnet machines. The presented machines are designed as having same geometrical dimensions and same materials for comparison. Permanent magnet machines, mathematical modeling, motor geometry.
реферат, добавлен 25.03.2011System for billet continuous caster’s mould heat engineering parameters monitoring. Formation of the internal heat transfer surfaces. Calculation the indicators: average heat flux density, overall heat exchange coefficient. Effective gas gap thickness.
статья, добавлен 30.01.2016Evaluation of the technical system and its subsequent use for decision-making to ensure complex technical systems with appropriate quality of work. The characteristics and specificity of the model changes performance States based on the Markov chain.
статья, добавлен 29.01.2016Appointment, device and action of the turning machine. Types of lathes, depending on the application. Metal processing on machine tools, turning operations. The use of water energy to drive. The principle of operation of the hydroelectric station.
статья, добавлен 11.03.2019Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.
презентация, добавлен 20.10.2014Features the design of tooling for casting under pressure of zinc alloys. The problem that arise when designing a press-forms of analysis. Experiments to study thermal stability of materials, parts, equipment subject to cyclic thermo-mechanical treatment.
статья, добавлен 17.12.2016The two main methods of mechanical assembly of plastic parts. Requirements for reliable mechanically bonded plastic joints. Special consideration for composites. The main advantages and disadvantages of adhesive bonding (gluing or glue bonding).
статья, добавлен 10.03.2019Wind turbine concept with air duct. Influence of the exit area and entry area on aerodynamic characteristics. Designing a new model of Invelox. The need to install a curtain at the end of the air intake to change the direction of the air flow up, down.
статья, добавлен 08.03.2021Approaches to optimization and the development of the model given the parameters and constraints of the subject area to improve the efficiency of product quality. Modules of adaptation and realization of adaptation functions and testing system components.
статья, добавлен 30.07.2016Peculiarities of application of mathematical apparatus for the calculation of point Baluba-Naidysh to develop the technology for scanning of the light openings of different configurations. Method of determining point equations for parabolic window.
статья, добавлен 07.12.2016- 37. Simplification and verification of dynamic equations of movement of an autonomous underwater vehicle
Autonomous underwater vehicles. The dynamic equations for describing the movement of a general AUV in a fluid with nonnegligible viscous properties and the possible simplification of this equation in regard to a specific construction of a real world AUV.
статья, добавлен 27.08.2020 Experimental improvement of the stability of the bolt connection of the technological and power modules of the new design of the modular machine-tractor unit. The new construction of the pivot connection of the technological module with the power module.
статья, добавлен 10.08.2022Rational modes of printing volumetric samples with a working thickness of the 316L powder layer of 40 μm to achieve a density of volumetric samples/ Determination of the density of metal samples by the metallographic method on an optical microscope.
статья, добавлен 19.03.2024Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
статья, добавлен 30.07.2016The comparison of natural modes for the first and second transverse oscillation modes obtained by numerical simulation and finite element package of analytical calculation of the core model. The analysis waveforms for different values of the defect.
статья, добавлен 29.06.2017Types of tool materials: from high-carbon steel to ceramics and diamonds, and their use as cutting tools in the modern metal industry. Cutting tool and its characteristics: hardness, strength. Achieving an acceptable tool life before replacing it.
статья, добавлен 26.04.2019Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022General characteristics of the hydrostatic spindle for ultraprecision double-sided machining. Familiarity with the main features and problems of modern engineering development. Consideration of ways to ensure quality indicators of machining parts.
статья, добавлен 20.07.2020Estimating the number of conduction modes can, their evaluation. Analysis of the model for the mean free path for backscattering. Calculation of near equilibrium thermoelectric transfer coefficients. Setting the differences in voltage and temperature.
статья, добавлен 30.07.2016Integration of the R.I. 01 industrial robot into the working system of the BB-01 flexible line. Operational and design features of the R.I. 01 loading robot. The central spindle of the system. The horizontal frame holding the arm of the loading robot.
статья, добавлен 25.10.2010Defining and analysis the essence of robot is an automatic device, which has a manipulator – mechanical analogue of human hand, and manipulator control system. Consideration and characteristic of the structural features model of domestic robot–helper.
статья, добавлен 29.01.2016Analysis of the overall stiffness range of most plastics in combination with common efforts to use the thinnest wall thickness possible. Dependence of plastics processing processes on tool quality and process parameters. Basic design considerations.
статья, добавлен 10.03.2019Technical characteristics of the new turning and milling machines, the CTX beta 2000 TC. Milling with up to 220 Nm of torque (CTX beta-TC max. 120 Nm). Innovative multi-channel programming with ShopTurn 3G. The main advantages of CTX beta 2000 TC.
презентация, добавлен 29.11.2015Volumes of agricultural production of whole grain rice in Kazakhstan. Development of a technology for improving peeler for processing grain rice shals. Characteristics of polymeric materials used instead of rubber for rollers shelling machine A1-3RD-3.
реферат, добавлен 16.10.2017