Effect of cyclodextrin attendance on hexagonal ordering of MCM-41 silicas
Hydrothermal sol-gel synthesis of hexagonally ordered silicas using a hybrid template system is reported. Silicas were characterized by IR spectroscopy, X-ray diffraction techniques as well as electron microscopy. The hexagonal structure of MCM-41.
Подобные документы
The main factors of physical phenomena that accompany the process of power explosive effect for the development of new processes of metal processing. Industrial testing of facing technology by explosion of artificial surfaces of complex configuration.
статья, добавлен 19.02.2019The research revealing of the amount of regular wood and hazardous wood treated in Finland in this year. The most common techniques are applied to wood treatment in this country. Hazardous waste processing. Prevention of producing waste. Energy recovery.
реферат, добавлен 16.11.2014Comparative analysis of the effect of chemical compounds on the process of forming an electric arc and the conditions for its combustion.Metal transfer in the interelectrode gap under experimental conditions. Specific power of electric arc discharge.
статья, добавлен 29.09.2016Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.
статья, добавлен 02.06.2014Consideration the mathematical model of process of pressing of seamless pipes. Effect on various forms of rolling shaping matrix. The nature of the formation of the deformation zone. Development of direct compression on a cylindrical mandrel pipe.
статья, добавлен 30.01.2016The influence of the addition of soy flour processed by ultrafine grinding and irradiation on the quality of crispy baked goods. The wet soybean grounds were dried and ground in an ultra-fine grinding machine. Also set the ratio of beans to water.
статья, добавлен 02.06.2022Theoretical study of the basic functioning of the starch industry. The raw materials used for the а production of polysaccharide under consideration. The structure of the modified starches and dextrin. The use of the ingredient as a food additive.
презентация, добавлен 27.10.2014Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016Investigation of physical and mechanical properties of the cement using of barium-containing clinker and gypsum stone. Effect of additives of barium-containing sulfateferrite clinker gypsum stone. Longer hardening and limits and compressive strength.
статья, добавлен 23.02.2016Strength is assumed - index for materials which can take standard, calculated values. Significant dependence between bending resistance, absolute size of structural elements. The structure of the wood fibers - factor which determine timber quality.
статья, добавлен 25.12.2016Розглянуто розроблення багатошарових захисних рідинних матеріалів для екранування електричних, магнітних та електромагнітних полів широкого частотного діапазону. Виготовлено серію рідких екрануючих сумішей на основі стандартних сертифікованих фарб.
статья, добавлен 31.01.2024Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022Structure of three-cone rock bit with inserted hard-alloyed rock-destruction and protecting equipment, in which the chief components are marked. The minimally possible set of operators, which support qualitative performance of technological process.
статья, добавлен 14.09.2016Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".
статья, добавлен 06.05.2018Features of the application of methods for monitoring the state of the wooden structure in the production flow. Ways to optimize the prediction of wood properties using various NDE methods. The combination of methods for effective quality control of wood.
статья, добавлен 29.11.2018Events held before the loading and unloading of heavy cargo, including taking into account the fact that the ship has an initial roll angle. The position of the keel when loading. The main criteria of ship stability during heavy lift operations.
статья, добавлен 28.09.2016Theoretical studies allow developing a theoretical substantiated method for calculating the stability of spray vortex countercurrent mass transfer device. Review and characterization of the effect on the drop centrifugal force and resistance forces.
статья, добавлен 14.07.2016Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016NbN and Nb-Si-N films were deposited by magnetron sputtering the Nb and Si targets on silicon wafers at various bias voltage. The films were annealed to establish their stability. The films were nanostructured represented an aggregation of crystallites.
статья, добавлен 30.07.2016The study of structural changes during hot deformation metal during controlled rolling. The influence of preheating temperature and deformation degree on the size and shape of austenite grains. The definition of the polygonal structure of the austenite.
статья, добавлен 30.01.2017- 71. Effect of functional fiber on viability of lactic acid bacteria and bifidobacteria during storage
The influence of gum arabic and oligofructose on the growth and viability of starter cultures of lactic acid bacteria and bifidobacteria used for the production of dairy products. Stimulation of growth of probiotic cultures in the presence of gum arabic.
статья, добавлен 25.12.2016 The comparison of natural modes for the first and second transverse oscillation modes obtained by numerical simulation and finite element package of analytical calculation of the core model. The analysis waveforms for different values of the defect.
статья, добавлен 29.06.2017Structure of engineering systems. A description of the statistical procedures recommended for use in reliability analysis "related" components. The choice of an appropriate probabilistic model for predicting the reliability of components of one's sibling.
статья, добавлен 14.09.2016Исследование алгоритма усреднения параметров орбиты Международной космической станции, примененный при реализации совместного с европейским космическим агентством космического эксперимента Global Time System 2. Поведение ошибок по долготе и по широте.
статья, добавлен 28.10.2018The roller of the belt as the most important parts of the conveyor, being subjected to continuous stress both during operation and in stopping periods. Causes and weight percentage of failures due to fatigue. Sealing system with simple labyrinth.
статья, добавлен 27.12.2016