Methods of mechanical joining
The two main methods of mechanical assembly of plastic parts. Requirements for reliable mechanically bonded plastic joints. Special consideration for composites. The main advantages and disadvantages of adhesive bonding (gluing or glue bonding).
Подобные документы
- 51. The influence of modified methyl cellulose on the main properties of expanding cementing slurries
The effect of modified methylcellulose on the main properties of expanding cementing slurries. When cementing low-temperature wells, expanding cementing slurries based on a mixture of Portland cement (70-75% PCT-I) and gypsum alumina cement (30-25% GAC).
статья, добавлен 04.09.2024 Analysis of a mathematical model to determine the transient modes of rotary kilns, drying drums and mills taking into account electromagnetic processes in the induction motor. Mechanical vibrations of the elements of the drive mechanism, long metal body.
статья, добавлен 14.09.2016Characteristics of distillation devices used in the production of alcohol in the XIX-XX centuries. Provisions of mechanical, microbiological, physicochemical, physiological theory of fermentation. The role of L. Pasteur in the study of alcohol production.
статья, добавлен 30.01.2022Biodegradable poly-3-hydroxybutyrate [P(3HB)] and birch sawdust - a material for the preparation of powder mixtures for molds in the production of granules and tablets. The prospect of a composite obtained on this basis for the building industry.
статья, добавлен 17.04.2022Nanocomposites comprising ray in a polymer. The reflection mechanical properties material. Increasing the polymer properties by forming the interphase. Obtaining curves of stress-strain states of macroscopic samples irradiated polymer materials.
статья, добавлен 30.07.2016Technical characteristics of the new turning and milling machines, the CTX beta 2000 TC. Milling with up to 220 Nm of torque (CTX beta-TC max. 120 Nm). Innovative multi-channel programming with ShopTurn 3G. The main advantages of CTX beta 2000 TC.
презентация, добавлен 29.11.2015Mechanical tests of with various hydrogen concentrations before and after the hydride reorientation tests were performed. Hydrogen pickup measurements in zirconium alloys: relation to oxidation kinetics. Hydride microstructure in the dummy claddings.
статья, добавлен 30.05.2021Directions of development of production technology of high-precision parts. Research in the field of management precision and quality parameters of the treated surface. Improvement of the technological process, equipment, instruments and devices.
статья, добавлен 06.12.2016The mass variable is considered the first and most important basis for motion events. Mass is what the body contains of matter, and mass exists in three states in the universe, and it is unique. From a mechanical point of view it is considered a variable.
статья, добавлен 12.05.2024Development of the composition of water-epoxy coating NIPU. Study the compatibility of components in water-based coatings. The optimum ratio of the components of the composition to obtain the necessary physical and mechanical properties of the coating.
статья, добавлен 29.07.2017Technological solutions that allow us to solve the problem of premature wear of the printing machines. A new technology of strengthening and recovery of details based on vibration roll burnishing is offered. Experimental work and scientific conclusions.
статья, добавлен 29.07.2016Improving the method of dynamic analysis of mechanical systems dynamic factors dynamic model which can be represented by three-mass system of row with the first driving mass with prestressing elastic drive connections. Finding the dynamic coefficients.
статья, добавлен 30.07.2016Aniline and its polymerization on cotton fabric to produce conductive cotton by chemical polymerization. Polyaniline is one of the electrically conductive polymers. Polymerization using several concentrations of aniline (ANI) and hydrochloric acid.
статья, добавлен 15.01.2021Review of works on the creation and study of environmentally friendly nanostructured polymer composites. Technology of production and application of nanocellulose. Development of new environmentally friendly hydrophobic polymer composites, their scope.
статья, добавлен 29.07.2017The flexural and compressive strength of mortar by partial replacement of cement with Nano-ZnO particles has been studied. The results showed that the flexural and compressive strength of the cement mortars with ZnO were higher than pure cement mortar.
статья, добавлен 12.06.2018Investigation of physical and mechanical properties of the cement using of barium-containing clinker and gypsum stone. Effect of additives of barium-containing sulfateferrite clinker gypsum stone. Longer hardening and limits and compressive strength.
статья, добавлен 23.02.2016Establishing conditions for quality surface finish in grinding abrasive wheel. Determine the optimal mode grinding, allowing you to get the highest performance and lowest cost processing, providing the necessary tech-tech requirements for machine parts.
статья, добавлен 14.09.2016In this study, porous Ti-Nb-Zr biomaterial which is not included poison elements was successfully fabricated by powder metallurgy using space holder of NH4HCO3 and foaming agent of TiH2. Biocompatibility of porous Ti-Nb-Zr alloys is similar to Ti-6Al-4V.
статья, добавлен 30.07.2016Square Lead-Rubber Bearings with four lead plugs to round Lead-Rubber Bearings with one lead plugs and shorten the analysis time. Comparison of load-deformation relationship. Comparison of the change in the outer edge temperature of the laminated rubber.
статья, добавлен 10.10.2021Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021Types of the combined mechanisms of simultaneous turning and folding blades, which can be stabilized the frequency of rotation of horizontal-axis wind turbines. Analysis of the dependence of the adjusting movement of the slide from rotation angles.
статья, добавлен 27.10.2016The essence of ventilation systems. Operation of special ventilation shafts, requirements for the location of the ventilation shafts. The design of the ventilation system, its role in the design of complex transport systems, road and rail tunnels.
контрольная работа, добавлен 19.02.2019Properties and structure of hydrocarbons. Types and communication aromatics. The nature of the relationship between the carbon atoms. The methods of extraction and processing of oil. The use of the rectification columns for fractionating of raw materials.
презентация, добавлен 30.06.2014Analysis of requirements for electric-drive of mechanism of pulsed wire feed, and the benefits of using a special Brushless Direct Current electric-drive. Design of half-bridge circuit to regulate the strength of the current phase of the stator windings.
статья, добавлен 22.12.2016Some Nano fertilizers used nowadays globally, green synthesis of nanoparticles. Research on the application of nanotechnology in crop production. Characteristics of methods of exposure to pathogenic microorganisms. Background of Nanotechnology in systems.
статья, добавлен 18.03.2021