How to use a nondestructive evaluation of timber structures
Features of the application of methods for monitoring the state of the wooden structure in the production flow. Ways to optimize the prediction of wood properties using various NDE methods. The combination of methods for effective quality control of wood.
Подобные документы
NbN and Nb-Si-N films were deposited by magnetron sputtering the Nb and Si targets on silicon wafers at various bias voltage. The films were annealed to establish their stability. The films were nanostructured represented an aggregation of crystallites.
статья, добавлен 30.07.2016Optical properties of nanocomposites are important and useful in their consumer satisfaction capacities. In this research, coloration properties of dyed PA6/Nano TiO2 nanocomposite is studied using a combined Mie and Kubelka-Munk light scattering theory.
статья, добавлен 30.07.2016The study of the Microbiology of the procedure of biological fermentation, physico-chemical characteristics of activated sludge of the Bortnichy station of aeration. Offer possible ways to increase the speed of the procedure of biological fermentation.
статья, добавлен 27.11.2016Directions of development of production technology of high-precision parts. Research in the field of management precision and quality parameters of the treated surface. Improvement of the technological process, equipment, instruments and devices.
статья, добавлен 06.12.2016Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
статья, добавлен 30.07.2016- 106. Features of check directional power relay series rbm through the use of digital testing systems
Evaluation of the effectiveness of electronic test during verification of the direction and power of electric switches connecting or disconnecting the circuit when certain conditions are met. The study of the performance of Electromechanical relays.
статья, добавлен 14.09.2016 Introduction of new and innovative solutions for robotic devices. Application in production of the special individual decision on assembly operations. Execution of the assembly process with the introduction of two-handed robot in the assembly process.
статья, добавлен 28.08.2020Determination of torque on the shaft of auger intensifier, power consumption, energy intensity and productivity of the backfilling workflow. Evaluation of soil properties, geometric parameters of the screw intensifier and speed of the bulldozer.
статья, добавлен 01.12.2017Review of works on the creation and study of environmentally friendly nanostructured polymer composites. Technology of production and application of nanocellulose. Development of new environmentally friendly hydrophobic polymer composites, their scope.
статья, добавлен 29.07.2017Development of a managed system architecture with the possibility of full-scale parametric optimization. Systematization of the architecture of the conversion system by the example of the technological process of liquid heating. Software designer EFFLI.
статья, добавлен 30.10.2016Defining and analysis the essence of robot is an automatic device, which has a manipulator – mechanical analogue of human hand, and manipulator control system. Consideration and characteristic of the structural features model of domestic robot–helper.
статья, добавлен 29.01.2016A method of determining the effective longitudinal elastic modulus for the composite material in the problem of longitudinal tensile composite. Unidirectional composite material with a hexagonal arrangement of fibers. The effective elastic modulus.
статья, добавлен 27.09.2016Аналіз методики та результатів математичного моделювання з використанням пакету Flow Vision процесів течії в’язкої рідини в вузькому проміжку між циліндричним електродом-дротом та пласкою поверхнею заготовки при коаксіальній подачі струменю промивки.
статья, добавлен 11.10.2013The purpose of research was isolation and identification of Enterococcus species from raw milk and traditional dairy products and their biochemical properties were examined. Some biochemical and technological properties of the strains were determined.
статья, добавлен 28.05.2022Controlling the rudder, counting the distance traveled, turning off the engine and resetting the wings - the simplest autopilot functions. Radio control - the technology, that allows drones to follow difficult routes, perform maneuvers in the air.
статья, добавлен 27.02.2021Systematization of lean production tools that can be implemented at enterprises. Possibilities of using each of the proposed tools to solve problems of Ukrainian business development. Determination of prerequisites for the formation of corporate culture.
статья, добавлен 09.07.2023Test the tribological properties of lubricants as the main stage of assessing their suitability for use in friction. The scheme of the "cone - three ball" with the use of objects of simple geometric shapes to test different construction materials.
статья, добавлен 29.01.2016Characterization of features spline approximation television pictures. Rearranged algorithm spline approximation television images detailing calculation of the coefficients which gives the possibility to improve the quality of decompressing video.
статья, добавлен 26.06.2016Consideration the processes taking place in the metal pipe during prolonged use. Studing the complex physical and mechanical properties to assess the resistance to the destruction of the metal in the environment closest to the operating conditions.
статья, добавлен 30.01.2016Features of the two-phase model of the structure of keratin fibers. Estimation of the importance of critical and equilibrium stresses in the fibril, transfer of its stress to the matrix. Study of a possible connection between microfibrils and matrix.
статья, добавлен 30.05.2022Nanocomposites comprising ray in a polymer. The reflection mechanical properties material. Increasing the polymer properties by forming the interphase. Obtaining curves of stress-strain states of macroscopic samples irradiated polymer materials.
статья, добавлен 30.07.2016Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016Consideration of the problems of energy conservation and management of production costs at metallurgical enterprises. The necessity of carrying out an energy-resource-saving policy of metal producers has been substantiated; directions of energy saving.
статья, добавлен 30.09.2021A lightweight, environmentally friendly nanocomposite based on thermoplastic potato starch plasticized with glycerin is described. Adding cellulose nanofibers, improving the barrier properties of films due to the tortuous path for penetrating molecules.
статья, добавлен 14.04.2022Technological aspects of production ammophos. The need for higher costs of sulfuric acid in the processing of Algerian phosphates. PH-dependence of the ratio of NH3:H3PO4 at neutralizing extraction phosphoric acid manufactured from algerian phosphorites.
статья, добавлен 23.02.2016