Simplification of thermal-mechanical coupled behavior analysis for square lead-rubber bearings with four lead plugs
Square Lead-Rubber Bearings with four lead plugs to round Lead-Rubber Bearings with one lead plugs and shorten the analysis time. Comparison of load-deformation relationship. Comparison of the change in the outer edge temperature of the laminated rubber.
Подобные документы
Intensive deformation of the elastic system of the machine - specific features of the cutting process. Circumcision of the gear with a disk the cutter in the continuous circular movement of the pinion - essence of the radial-circular cutting mode.
статья, добавлен 14.09.2016The developing of the numerical model of viscoelastic material using finite element method. The comparison of the obtained results with use of FEM software with experimental data. The calculation of the stress and strain state of the asphalt specimen.
статья, добавлен 29.09.2016Dynamic designer as a way to save time and cost of getting new products to market, and improving old ones without a huge investment in equipment. Using parametric solid models for to develop the form of the parts. Mechanical desktop to build prototypes.
презентация, добавлен 21.02.2014Consideration of the concept of social change in the framework of social psychology. The role of different levels of methodology varies depending on the level of social change. Specifics of psychological research of social changes at different levels.
статья, добавлен 16.08.2020Development of an algorithm for predicting and monitoring the resource of mechanical systems. A method for multi-criteria evaluation of the complex safety characteristic of a road vehicle. Synthesis of active traffic management experiences in Europe.
статья, добавлен 26.09.2021Household appliances as electrical / mechanical machines that perform some household functions, such as cooling / heating, cooking or cleaning. Its classification and functional features, modern achievements of the industry and prospects for improvement.
статья, добавлен 20.02.2019- 57. Chemical modification of aminopolysaccharide from shrimp shell by direct connection with polyaniline
Modification of aminopolysaccharide by deacetylation of chitin from the shrimp shell using the enzyme as a biocatalyst and microwave energy. The influence of temperature and reaction time, the ratio of aminopolysaccharide to aniline on its properties.
статья, добавлен 10.08.2020 The mass variable is considered the first and most important basis for motion events. Mass is what the body contains of matter, and mass exists in three states in the universe, and it is unique. From a mechanical point of view it is considered a variable.
статья, добавлен 12.05.2024- 59. Global Research on Artificial Intelligence from 1990–2014: Spatially-Explicit Bibliometric Analysis
The evaluation of artificial intelligence research from 1990–2014 by using bibliometric analysis. Growth trend of articles in artificial intelligence from. Temporal pattern of frequently used keywords. International Productivity and Collaboration.
статья, добавлен 02.02.2017 Rheology of high-viscosity marine fuel, temperature conditions of fuel preparation in ship power plant. The relationship between objects, environment and fuel quality of the fuel spray. Influence of variable electric fields for high-viscosity marine fuel.
статья, добавлен 28.09.2016Results Global Capstone Design Workshop in order to find eco-friendly, energy-saving methods in our daily lives and to develop and improve them. In particular, selecting topics based on practical methods for Global Capstone Design will be the main focus.
статья, добавлен 20.09.2021Consideration the processes taking place in the metal pipe during prolonged use. Studing the complex physical and mechanical properties to assess the resistance to the destruction of the metal in the environment closest to the operating conditions.
статья, добавлен 30.01.2016The analysis of the cement production process in Ghana, which is limited to grinding clinker into cement and its packaging and distribution. The equipment of grinding chains, the best configuration. Control methods used for cement grinding chains.
статья, добавлен 30.05.2018Comparison of the results of processing arrays light absorption alternate method of incorporating calibration surface with other methods. Determination of Ni2 +, Co3 +, Fe2 +, Cu2 + from 1-(2-pyridylazo)-2-naphthol in aqueous-micellar environment.
статья, добавлен 23.02.2016The two main methods of mechanical assembly of plastic parts. Requirements for reliable mechanically bonded plastic joints. Special consideration for composites. The main advantages and disadvantages of adhesive bonding (gluing or glue bonding).
статья, добавлен 10.03.2019- 66. Investigation of properties of the constant technological track, which is used in bridge agriculture
Mechanical properties of soil traces of a permanent technological track and their influence on the traction and traction properties of a bridge agricultural machine of a new design. The research was conducted using the provisions of the tractor theory.
статья, добавлен 30.08.2022 The base of constructing computer model of the analysis of complex physical-chemical phenomena in the process ORIEN in continuous arc furnace is as the main aggregate of energy-metallurgical complex. A mathematical model of physical-chemical processes.
статья, добавлен 02.11.2018Импорт геометрических моделей соединений, имеющих формат 3D в расчетную систему ANSYS Mechanical для проведения статического анализа. Подключение к проекту модуля расчета усталостной прочности для определения усталостной прочности деталей соединения.
статья, добавлен 23.06.2020The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022Consideration the influence of scandium on mechanical properties and heat-resistance of magnesium alloy ML10. Macrostructure of ML10 alloy with different scandium content. Sizes of microconstituents of heat-treated alloy with different scandium content.
статья, добавлен 30.01.2016Сущность технологии и техническая характеристика 3D принтера. Основные виды и преимущества 3D-печати. Краткое описание видов печати послойного напраления (Fusing Deposition Modeling) и послойного склеивания пленок (Laminated Object Manufacturing).
контрольная работа, добавлен 18.01.2017Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
статья, добавлен 30.07.2016The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016The model of the disperse material behavior under vibration in the hole of the dispenser based on the Navier-Stokes equations. The influence of the power factor on the movement of the product and the parameters of the hole on the vibrating dosing process.
статья, добавлен 14.09.2016Justification of the status of the time-projection camera as the main track detector and charged particle identification detector in the new multifunctional detector of the Collider-type heavy ion particle accelerator complex based on the Nuclotron.
статья, добавлен 20.05.2020