Organic-mineral fertilizers based on processing of the nitric-sulfuric acid brown coal and phosphorites
Obtaining complex fertilizers by oxidation of Angren brown coal with a mixture of nitric and sulfuric acids and decomposition of oxidation products with a mineralized mass and slime phosphorite of the Central Kyzyl Kum. Fertilizers' commercial properties.
Подобные документы
Investigation of physical and mechanical properties of the cement using of barium-containing clinker and gypsum stone. Effect of additives of barium-containing sulfateferrite clinker gypsum stone. Longer hardening and limits and compressive strength.
статья, добавлен 23.02.2016Familiarization with layout of placement of guard signaling complex systems. Research technology of modeling discrete continuous stochastic systems. Characteristics of the main methods ensuring probability of successful fulfilment of seismic sensor.
статья, добавлен 30.01.2016Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
статья, добавлен 21.12.2016Analysis of the evolution of approaches to the design of viable complex systems and the formation of the principles of hybrid thinking of designers on a transdisciplinary basis. Formation of the engineering design thinking as a means of adaptation.
статья, добавлен 15.09.2024Processes of change of mechanical properties and microtexture of castings from gazars. Effect of monolithic areas formation inside the porous structure. Consideration of monolithic formations inside porous structure of gazar after annealing, x 50.
статья, добавлен 30.01.2016Comparison of two non-conventional processes which are laser and photochemical machining. The formation of complex shapes in metal sheets. Chemical etching of the material for the manufacture of the desired finished product by a controlled corrosion.
статья, добавлен 03.12.2015The work of complex heat-recovery systems using water-hiting and air-heating heat-recovery exchangers was investigated. The combined use recovered heat to heat the return heat-network water, water of chemical water-purification system or combustion air.
статья, добавлен 22.04.2021Consideration the influence of scandium on mechanical properties and heat-resistance of magnesium alloy ML10. Macrostructure of ML10 alloy with different scandium content. Sizes of microconstituents of heat-treated alloy with different scandium content.
статья, добавлен 30.01.2016Improving the physical and mechanical properties of powder steels. Study of the effect of heat treatment on the structure of powder carbon steels with carbon-containing components. Research of heat treatment processes: hardening, tempering and annealing.
статья, добавлен 27.02.2021The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016Results Global Capstone Design Workshop in order to find eco-friendly, energy-saving methods in our daily lives and to develop and improve them. In particular, selecting topics based on practical methods for Global Capstone Design will be the main focus.
статья, добавлен 20.09.2021The conductive nanocomposite films on the basis of reactionary copolymers received. The threshold of their percolation is determined. It was shown that its value depends on the size of specific surface of nanotubes and conditions of composite obtaining.
статья, добавлен 23.09.2016An analysis of demand in the semiconductor industry, covering all three phases of materials: gases, liquids and solids. The study of the peculiarities of application for solids which includes a semiconductor substrate, metal, dielectric, an organic film.
книга, добавлен 14.03.2014Thermosetting plastics, their irreversible chemical reaction (polymerization), including the effects of temperature and time. Bringing the resin composition to a liquid state, forcing the liquid to flow into the cavity of the desired configuration.
статья, добавлен 10.03.2019Determination of the rolling parameters that allow obtaining a bimetallic ribbed bar. Familiarization with the shape and dimensions of the round ribbed finished pass and of the bimetallic flat oval band obtained in numerical modelling - cross-section.
доклад, добавлен 24.12.2014The elemental composition of the developed gerodietetic dry soluble product for enteral nutrition. The satisfaction level of older age group representatives average needs in mineral elements basing on the developed product in ready for usage liquid form.
статья, добавлен 14.02.2022Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016The main production methods jet fuels rocket engines. Prospects for the use of various raw materials to produce jet fuels in the context of limited energy resources. The impact of processing production and use of aviation fuels on the environment.
статья, добавлен 23.02.2016The manufacturing industry may be a key sector for the application of this technology, reduce the use of conventional energy sources, especially in the food industry located in the Andean region. Ecuadorian policies and regulations on renewable energy.
статья, добавлен 23.07.2021Transit of natural gas along the territory of Ukraine to the countries of the Western and Central Europe. Main resons of the loss of pipeline efficiency. Necessity for studying of the operation modes of the gas transport system during underloading.
статья, добавлен 01.12.2017Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".
статья, добавлен 06.05.2018Aluminum can be considered green when its production and alloys processing are low-carbon (as well as associated with the reduced amount of other greenhouse gases, hazardous chemicals and environmental pollutants), include recycling of scrape and waste.
статья, добавлен 19.09.2024Image processing of assembly parts at specified automated line from FESTO company to automate monitoring and evaluating of obtained data together with supporting of educational activities for field: "automation and control of machines and processes".
статья, добавлен 26.08.2020The development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes which consist of the metallothermic stage and SHS (self-propagating high-temperature synthesis).
статья, добавлен 07.09.2022This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022