Influence of fine-grinded glass additives on the induction and post-induction periods of Portland cement hardening
Chemical compositions of Portland cement. Possibility of using waste glass in building technology. A structure alkaline compounds. Study of fine-grinded glass. Influence additives on the induction and post-induction periods of Portland cement hardening.
Подобные документы
Investigations concerning the processes of plugging stone structure formation, using X-ray diffraction, electronic microscopy were implemented. Influence of active mineral additives of metakaolin on the properties of plugging mortar were established.
статья, добавлен 21.12.2016Examined of the physical-chemical properties and thermal decomposition, as well as infrared spectrum of glass. Acquaintance with the results of the derivatographic analysis. Study of the coincidence of crystallization temperatures of glass decomposition.
статья, добавлен 26.02.2021The influence of low-molecular additives on the composition of polyvinylpyrrolidone with hydroxyethyl compositions. Adhesion based on the angle of wetting compositions. The effect of different additives on the adhesive strength of the adhesive joint.
статья, добавлен 21.12.2016Chemical identification of polymer additives and its significance for links in the plastics supply chain. The effect of additives on the properties of materials and on the cost of production of polymers. Quantitative determination of polymer additives.
статья, добавлен 10.03.2019Study the process of liquid hydrocarbon oxidation. Chemical reaction of cyclohexane with the organic additives of different nature. Composition of products and speed of oxidation of toluene and p-xylene in the presence of binary liquid catalysts.
статья, добавлен 23.02.2016Chemical properties of sodium. Sodium compounds are important to the chemical, glass, metal, paper, petroleum, soap, and textile industries. History of appearance of sodium. The serum sodium and urine sodium.
реферат, добавлен 09.03.2010Plastic additives as a wide range of chemicals used by resin manufacturers, compounds and manufacturers to improve the properties, processing and characteristics of polymers. Features of their chemical composition and conditions of effective use.
статья, добавлен 10.03.2019Physico-chemical characteristics of I-40 and MS-20 commercial mineral oils. The use of such oils for the lubrication of molds in the manufacture of glass containers. The study of the thermal stability of oils and their fractions of hydrocarbons.
статья, добавлен 23.02.2016Friction units for automotive and special vehicles are designed to operate under friction conditions. The development of a unified understanding of the effect of the size and chemical nature of ceramic additives on the processes occurring in a friction.
статья, добавлен 22.05.2022Proving that MBT fine fraction is fit-to-use as functional material for methane degradation layer. Confirmation of the methane degradation efficiency in fine MBT fraction is important from the ecological point of view. The use of a fine fraction.
статья, добавлен 11.07.2022Study the chemical modification polyglycidyl phenolformaldehyde oligomers by methacrylic acid using a catalyst benzyltriethylammonium chloride. The influence of time, temperature on the rate of reaction between compounds. A structuring chemical mixtures.
статья, добавлен 23.02.2016The study of physico-chemical properties of modified forms of natural biopolymers – carboxymethyl cellulose and xanthan gums, their ability to film formation water-soluble polymeric compositions and the influence on growth and productivity of crops.
статья, добавлен 23.02.2016Catalytic, electrical, optical and magnetic properties of cobalt sulfide. Chemical structure and application of inorganic compounds and salts the sulfurous acid. Brief description of the structure of pyrite. Methods for the synthesis of the metals.
статья, добавлен 30.07.2016Selection of the composition of a simplex nutrient medium by mathematical modeling. Optimization of the biosynthetic ability of the streptomyces recifensis strain for the synthesis of amylolytic enzymes. Influence of physical and chemical factors on it.
статья, добавлен 12.05.2024Modern and effective methods of hardening metals. Nitriding in a glow discharge in ammonia or in an anhydrous medium. Tribological and physicochemical properties of hardened surfaces obtained by nitriding with autonomous and interconnected BATR modes.
статья, добавлен 22.05.2022Study films of CdxZn1-xTe solid solution, obtained by a close-spaced vacuum sublimation technique under different temperatures of glass substrate by energy dispersive analysis of X-rays, scanning electron microscopy and X-ray diffraction methods.
статья, добавлен 30.07.2016A sample of Mg10Ir19B16, prepared from the elements by high-temperature treatment in sealed Ta containers. The chemical composition, confirmed by WDXS analysis. Electronic structure calculations and chemical bonding analysis by the ELI/ED approach.
статья, добавлен 23.02.2017The use of cation exchanger as a catalyst for the esterification reaction of diisopropyl ether absolutes - a method for creating waste-free technology for the production of isopropyl alcohol. The physical-chemical properties of received esterificates.
статья, добавлен 20.09.2018Preparing of mesoporous organic-inorganic hybrid composites on glass substrates by the sol-gel method for testing the proteins adhesion. The coatings of colloidal silica, polysiloxane sol methyl-modified sols and with various wettability properties.
статья, добавлен 02.04.2014The chemical structure of the polymer latexes. The influence of surfactants on the drip solution. The mechanism of anionic with a negative charge in the screed, acting as air entrainment. Hydrogen bonding, water absorption and compressive strength.
статья, добавлен 22.02.2015Carbon as the element essential to all of life, and hence the basis for a vast field of study. Electronegativity value of fluorine. Plastic polystyrene - important product of the hydrocarbon family. Chemical properties of carboxylic acids and esters.
доклад, добавлен 15.09.2014- 22. Copper(II) and nickel(II) with N-bis(salicylidene)thiosemicarbazide heterometal complex compounds
Heterometal coordination compounds of copper(II), nickel(II), alkaline-earth metals with N-bis(salicylidene)thiosemicarbazide have been synthesized. Using elemental analysis has been shown that the synthesized compounds have semi-conducting properties.
статья, добавлен 30.08.2016 Obtaining via hydrolysis of tetraethylorthosilicate in presence of template agent Pluronic P123 Ag/Au bimetallic nanoparticles in porous sol-gel silica films on glass. Definite amounts of AgNO3 and HAuCl4 by dip-coating procedure by a thermal treatment.
статья, добавлен 01.04.2014The cycle of sanitary and chemical investigations of various artificial leathers and the polymer composition. The possibility of conducting direct stabilization of artificial leathers. The hygienic evaluation of polymers and polymer-containing materials.
статья, добавлен 29.01.2016Synthesis of a methacrylic azomonomers based on para-aminoacetanilide to obtain functionalized polymers for orientation of liquid crystals. The kinetics of polymerization of synthesized azomonomers. Constants of thermo-induced radical polymerization.
статья, добавлен 21.12.2016