Automated designing of driver for light-emitting-diode lamps
Description and analysis of the characteristics of main problems to be solved in design of fixture. Examination and description of the main principles of work with the developed software to automate the modeling process and the design of the led lamp.
Подобные документы
Types of Electric Vehicle in use Today. Alternative and Novel Energy Sources and Stores. Electric Machines and their Controllers. Motor Cooling, Efficiency and Mass. Design of Ancillary Systems. Battery powered cars and vans. Torque speed characteristics.
книга, добавлен 25.11.2013Consideration of the characteristics of semantic modeling. Analysis of passivity-based switching control for stabilization of wheeled mobile robots. Features optimal kinodynamic motion planning for 2D reconfiguration of self-reconfigurable robots.
книга, добавлен 09.04.2013The mode of longitudinal motion of attached underwater vehicles under the action of propulsors is considered. Analysis of experimental data of design variants of models and natural objects. The behaviour of the devices in the aqueous environment.
статья, добавлен 15.02.2021Analysis of design features and parameters of automobile and aircraft engines is carried out. It is shown that car engines, despite the high technical level achieved at the beginning of the 21st century, do not technically meet aviation requirements.
статья, добавлен 19.06.2022Test the tribological properties of lubricants as the main stage of assessing their suitability for use in friction. The scheme of the "cone - three ball" with the use of objects of simple geometric shapes to test different construction materials.
статья, добавлен 29.01.2016Analysis of the existing methods of the automatic regulation of the process of the drying of timber. Algorithm of the regulator of kiln drier. The need of regulating the drying process taking into account the characteristics of wood and drying agent.
статья, добавлен 28.11.2016Development of a managed system architecture with the possibility of full-scale parametric optimization. Systematization of the architecture of the conversion system by the example of the technological process of liquid heating. Software designer EFFLI.
статья, добавлен 30.10.2016The two main methods of mechanical assembly of plastic parts. Requirements for reliable mechanically bonded plastic joints. Special consideration for composites. The main advantages and disadvantages of adhesive bonding (gluing or glue bonding).
статья, добавлен 10.03.2019The processes of generating large-dimension permutation matrices and their matrix powers, including in their new spaces, along with their features and advantages for modeling a protocol for the agreement of a main cooperative secret key-permutation.
статья, добавлен 11.12.20243D printing (Additive Manufacturing Process, AM) is any of various processes used to make a three-dimensional object without the use of dies, molds or machining. The most basic, differentiating principle behind 3D printing. General principle modeling.
статья, добавлен 20.02.2019Special supervisory control system responsible for the informative data acquisition about the current enterprise production and its control. The main SCADA. The general structure of SCADA. The Three main structure components modern SCADA-systems.
статья, добавлен 30.04.2019General characteristics of gas motor fuel. The current state of the market of gas motor fuel and infrastructure for use of CNG. Problems in the development of the NGV market and their solutions. Analysis of interest in the use of natural gaseous fuels.
статья, добавлен 10.03.2019- 63. The influence of modified methyl cellulose on the main properties of expanding cementing slurries
The effect of modified methylcellulose on the main properties of expanding cementing slurries. When cementing low-temperature wells, expanding cementing slurries based on a mixture of Portland cement (70-75% PCT-I) and gypsum alumina cement (30-25% GAC).
статья, добавлен 04.09.2024 The main factors of physical phenomena that accompany the process of power explosive effect for the development of new processes of metal processing. Industrial testing of facing technology by explosion of artificial surfaces of complex configuration.
статья, добавлен 19.02.2019The article is devoted to clarifying the features of stereographic images, the main aspects of using 3D printing as modern creative technology in various fields of human activity. The article analyzes the principles of creating three-dimensional products.
статья, добавлен 14.09.2020Analysis of requirements for electric-drive of mechanism of pulsed wire feed, and the benefits of using a special Brushless Direct Current electric-drive. Design of half-bridge circuit to regulate the strength of the current phase of the stator windings.
статья, добавлен 22.12.2016The main production methods jet fuels rocket engines. Prospects for the use of various raw materials to produce jet fuels in the context of limited energy resources. The impact of processing production and use of aviation fuels on the environment.
статья, добавлен 23.02.2016The main advantages and disadvantages of well-known spiral drills with a multi-stage blade. It is described that the bridge, together with the steps adjacent to the grooves, is a small centering drill, performs centering and drilling during the process.
статья, добавлен 10.02.2021Peculiarities of application of mathematical apparatus for the calculation of point Baluba-Naidysh to develop the technology for scanning of the light openings of different configurations. Method of determining point equations for parabolic window.
статья, добавлен 07.12.2016Rational modes of printing volumetric samples with a working thickness of the 316L powder layer of 40 μm to achieve a density of volumetric samples/ Determination of the density of metal samples by the metallographic method on an optical microscope.
статья, добавлен 19.03.2024The results of expedition research of some solar salt works of the South of Ukraine (Kherson region, AR Crimea) and lake Baskunchak (Astrachan region, Russia). Discussing the approaches to modeling natural environment in D. salina laboratory culture.
статья, добавлен 27.07.2016To separate simultaneous removal of mechanical impurities and water - the main tasks of filters. Analysis of the graphical representation of the piping system for pumping fuel and necessary equipment for the storage and dispensing of fuel operations.
курсовая работа, добавлен 29.03.2018- 73. Polyphenol composition and technological characteristics of the coloured whey from various origin
The purpose of this scientific work was to determine the polyphenolic composition and technological characteristics of colored whey of various origins, obtained by coagulation of milk proteins with traditional berry raw materials and wild herbs.
статья, добавлен 10.06.2022 The development of a new functional proposition, which uses the Poisson and Weibull distribution components, to simulate a functional U-shaped function. Estimating the effectiveness of the developed functional representation by numerical examples.
статья, добавлен 12.02.2019Technical characteristics of the new turning and milling machines, the CTX beta 2000 TC. Milling with up to 220 Nm of torque (CTX beta-TC max. 120 Nm). Innovative multi-channel programming with ShopTurn 3G. The main advantages of CTX beta 2000 TC.
презентация, добавлен 29.11.2015