Structural properties of the SnxSy films obtained by the thermal vacuum Co-evaporation
The temperature dependence of the sulfur and tin vapor. Influence of growth conditions on the morphology of the surface and structural properties of the films with the stoichiometric composition and substrate temperature on their chemical composition.
Подобные документы
The use of cation exchanger as a catalyst for the esterification reaction of diisopropyl ether absolutes - a method for creating waste-free technology for the production of isopropyl alcohol. The physical-chemical properties of received esterificates.
статья, добавлен 20.09.2018Chemical identification of polymer additives and its significance for links in the plastics supply chain. The effect of additives on the properties of materials and on the cost of production of polymers. Quantitative determination of polymer additives.
статья, добавлен 10.03.2019SiO2 materials containing different magnetic fillers are obtained by the sol-gel method. It is studied the weakening of electromagnetic radiation in the frequency range 8–11.5 GHz by the materials obtained with the use of panoramic attenuation measurers.
статья, добавлен 02.04.2014Modern and effective methods of hardening metals. Nitriding in a glow discharge in ammonia or in an anhydrous medium. Tribological and physicochemical properties of hardened surfaces obtained by nitriding with autonomous and interconnected BATR modes.
статья, добавлен 22.05.2022Main calculation of activation volumes for interstitials and vacancie. Diffusion equations for point defects. Surface generation and recombination of point defects. Simulation of stacking fault growth. Simulation of stress-nediated dopant diffusion.
статья, добавлен 29.04.2017Crystalline and electronic structures of nanoalumina alone and in different mixtures with nanosilica. X-ray diffraction and ultrasoft X-ray emission spectroscopy. Pore size distributions calculated. Resalts of the OKa emission bands of alumina in samples.
статья, добавлен 20.03.2016Biological, physical and chemical properties of macrocyclic compounds based on the researches of membrane activity. Finding of the certain concentration of filipin for increase of conductivity, definition of selectivity and single ionic filipin channels.
статья, добавлен 22.02.2021- 83. Ti-Al alloy
A new process for developing titanium aluminides using chemical vapor synthesis was investigated in a laboratory experiment. Aluminum subchloride was used as the reducing agent in the reaction with TiCl4 and the source of aluminum for Ti-Al alloy.
лабораторная работа, добавлен 01.11.2019 Justification of the qualitative composition of excipients for encapsulation in the production of "Apised" capsules – a new original medicine, created on the basis of: powder of natural honey and medicinal plant raw materials (hop cones, lavender).
статья, добавлен 29.10.2016Development of technological scheme for processing of oil extracted in Iraq. Characteristics and physico-chemical properties of the oils of Iraq. A description of the stages of oil refining. Calculations of material balances of each processing stage.
статья, добавлен 23.02.2016Research modifications in the process of protective coating forming while heating. Examination of interaction between silicium organic compounds based on the rich polymethylphenylsiloxane. Opportunities of their utilization for high-temperature.
статья, добавлен 24.02.2016Electrodeposition of cobalt-silver and cobalt-tungsten alloys from citrate electrolyte. Characteristic of their catalytic and anticorrosive properties. Effect of the ratio of the electrolyte components depending on the composition of the cobalt alloy.
статья, добавлен 30.08.2016Change of palladium ions concentration during cementation on the magnesium disk in dimethylformamide solution. Chemical microparticles and agglomerates anorganic chlorine compound. Palladium adhesion to the substrate surface in dimethylformamide.
статья, добавлен 23.02.2016Study of the process of intramolecular cyclization products of epichlorohydrin aminolysis of secondary amines. Analysis of the energy characteristics obtained in vacuum and in acetonitrile solution with water as an "active" solvation partner of reaction.
статья, добавлен 30.10.2016Research and characteristics of the methanation of carbon dioxide under atmospheric pressure over a catalyst containing 5% of metals prepared by the impregnation method. Measured of the specific surface area by low-temperature adsorption of argon.
статья, добавлен 29.09.2016The crystal structure of Yb2Al15Pt6, determined from X-ray single crystal diffraction data. The structural particularities of Yb2Al15Pt6, discussed in comparison with the structures of Y2Ga9Co3, Tb2Ge3Pt9, Yb2Ga9Pd3 and Er4Al24Pt9. The Al-Pt interactions.
статья, добавлен 23.02.2017Application of the SwissADME web tool for the analysis of pharmacokinetics and properties of medicines. Study of antimicrobial activity and toxicity of phenylquinazoline derivatives, Assessment of metabolism, determination of solubility of compounds.
статья, добавлен 03.09.2024Analysis, synthesis and properties of six isomeric heterocyclic systems containing two fused rings of pyridine with different relative positions of the atoms of nitrogen - naphthyridines. Physicochemical properties and reactivity of naphthyridines.
дипломная работа, добавлен 05.03.2013The method of synthesis of fluorinated heterocycles. The use of mono- and 1,3-dicarbonyl substrates and their nitrogen-containing analogues. Biological activity, physical and chemical properties of heterocyclic compounds with perfluoroalkyl groups.
научная работа, добавлен 05.03.2013Magnetic microstructure of near-surface layer ataxin film iron-trog the grenade orientation. Dagoniat matrix nuclear Hamiltonian mixed magnetic dipole and electric quadrupole interactions. The orientation of the magnetic moments of cationic sublattices.
статья, добавлен 24.02.2016Analysis of the effect of resin in the carrier of the coating on its operational properties. Coating classification by type. Characteristics of the widely used resins for the manufacture of modern coatings: acrylics, alkyds, epoxy resins, polyesters.
статья, добавлен 10.03.2019Development of a method of mixing the hydroxides for the preparation of Lі[Ni0.5Co0.25Mn0.25]O2 from the respective products. Determination of average grain size, the measurement of impedance. Study of electrochemical properties using cyclic voltammetry.
статья, добавлен 21.12.2016To study antimicrobial properties of the synthesized surfactants, the method of consequent dilution was used. The experiments were carried out in the test tubes contained a surfactant at different concentrations and 1 ml of the physiological solution.
статья, добавлен 03.03.2021Mathematical modelling of diffraction by spiral nanotubes of arbitrary chemical composition, whose structure is described by Bravais cells. The intensity distribution in the layer plane and along the line layer in the case of electronic microdiffraction.
статья, добавлен 23.02.2016Dependence of the size of tannin nanocapsules on the nature of the shell. Considering the nanoparticle in guar gum having the lowest average value and the shell consisting of sodium alginate having the highest value. Properties of nanostructured tannin.
статья, добавлен 21.05.2023