Calculation of the stable operation of the spray vortex countercurrent mass transfer device (VSCMED) depending on the hydrodynamic flow characteristics
Theoretical studies allow developing a theoretical substantiated method for calculating the stability of spray vortex countercurrent mass transfer device. Review and characterization of the effect on the drop centrifugal force and resistance forces.
Подобные документы
Obtaining complex fertilizers by oxidation of Angren brown coal with a mixture of nitric and sulfuric acids and decomposition of oxidation products with a mineralized mass and slime phosphorite of the Central Kyzyl Kum. Fertilizers' commercial properties.
статья, добавлен 27.01.2021Polytetrafluoroethylene as one of the promising polymers for tribotechnical purposes. The use of polysulfonamide fiber to increase the wear resistance of polytetrafluoroethylene under conditions of friction without lubrication in reciprocating motion.
статья, добавлен 11.08.2021Tissue Paper and its properties. Space and weight characteristics. Carrier and type of aircraft for transportation. Limitations by sizes, weight and loading on the floor. Calculation of number of bags that we can put into one box. Manipulation signs.
курсовая работа, добавлен 16.12.2013The control station is designed for the control and smooth adjustment of the rotation frequency of the shaft of the alternating current electric motor depending on the operating characteristics of the technological equipment of the rod depth pump units.
статья, добавлен 10.12.2024Evaluation of the technical system and its subsequent use for decision-making to ensure complex technical systems with appropriate quality of work. The characteristics and specificity of the model changes performance States based on the Markov chain.
статья, добавлен 29.01.2016Theoretical study of the basic functioning of the starch industry. The raw materials used for the а production of polysaccharide under consideration. The structure of the modified starches and dextrin. The use of the ingredient as a food additive.
презентация, добавлен 27.10.2014Description the current state of the use of natural artificial sweeteners, especially glucose-fructose syrup in the food industry. Methods of determination of the consistency of experimental samples by the method of gravitational penetration is describe.
статья, добавлен 23.03.2018Rationale for the use of advanced technology for sewage treatment schemes dairies. Removal of insoluble organic matter by adding a flotation purification scheme. Using the immersed biofilter for a disk intensive degradation of organic pollutants.
статья, добавлен 13.08.2016Сопоставлены данные о гидродинамике реального потока смоделированного в программе SolidWorks Flow Simulation в эмульсоре вихревого типа, в центральной части камеры энергетического разделения которого, создается зона пониженного давления - зона кавитации.
статья, добавлен 02.01.2025Wind turbine concept with air duct. Influence of the exit area and entry area on aerodynamic characteristics. Designing a new model of Invelox. The need to install a curtain at the end of the air intake to change the direction of the air flow up, down.
статья, добавлен 08.03.2021Class of application of heat pumps in industry. Review of the carbon dioxide heat pump in the transcritical cycle of operation according to the expander-ejector scheme. Development of methods for selecting control valves for a given heat pump circuit.
статья, добавлен 02.02.2019The concept and functional characteristics of diamond-like films of amorphous carbon with a high concentration of carbon with SP3. The peculiarities of their practical use. Diagram of the coating, its physical and chemical properties, the benefits.
статья, добавлен 12.06.2015The mixed approach that combines theoretical research, analysis of scientific research with analysis of practical examples, increasing visitor engagement through augmented reality, virtual reality technologies, also encompasses important design aspects.
статья, добавлен 24.06.2024Technology of iron-concrete products. Optimization of experiment in chemistry and chemical technology. Blocks from rocks for facing, architectural-construction, memorial and other products. Methods of determining water absorption and frost resistance.
статья, добавлен 29.07.2021Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
статья, добавлен 21.12.2016Обзор инновационной линейки PDC долот компании "Бейкер Хьюз" Talon Force. Принцип инновационной разработки, процесс разработки, результаты применения и выгода от применения новых технологий при бурении скважин в сложных геологических условиях Самары.
статья, добавлен 22.01.2019The main criteria for the quality of a pile coating, obtained by electro-floating. Experimental data obtained on a sample of nylon pile used in applying pile coatings by electro-floating method, which prove the efficiency of the proposed method.
статья, добавлен 30.08.2020Аналіз методики та результатів математичного моделювання з використанням пакету Flow Vision процесів течії в’язкої рідини в вузькому проміжку між циліндричним електродом-дротом та пласкою поверхнею заготовки при коаксіальній подачі струменю промивки.
статья, добавлен 11.10.2013Comprehensive analysis of allelic protein variants suitable for use in bakery products made from Iraqi wheat varieties, as well as biological evaluation of these varieties using a genetic source using a general method of qualitative grain selection.
статья, добавлен 18.03.2021- 70. Variation of physico-chemical properties on the nature of filler in artificial marble production
The influence of the nature of the filler on the physicochemical properties of artificial marble. The results of studies on the influence of various fillers on strength, density, water absorption and other characteristics of the material are presented.
статья, добавлен 14.02.2025 The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022Experimental improvement of the stability of the bolt connection of the technological and power modules of the new design of the modular machine-tractor unit. The new construction of the pivot connection of the technological module with the power module.
статья, добавлен 10.08.2022Review trapping processes in so-called “free” thick-film structures based on spinel-type Cu0.1Ni0.8Co0.2Mn1.9O4 ceramics. Studies need to add glass in the ceramic material. Positron trapping processes in temperature-sensitive thick-film structures.
статья, добавлен 30.07.2016- 74. Strength characteristics of a composite laminate with a center hole under biaxial tensile loading
The developing of a useful model dealing directly with biaxial loading of composite plates with stress concentrations, which can be called progressive damage model. Progressive damage model was utilized to analyze the damage evolution of specimen.
статья, добавлен 18.01.2021 Review of works on the creation and study of environmentally friendly nanostructured polymer composites. Technology of production and application of nanocellulose. Development of new environmentally friendly hydrophobic polymer composites, their scope.
статья, добавлен 29.07.2017