Research of Heat-Protective Properties of Products Made of Deer Hair
Comparison of thermal insulation properties of Sakhabult products with products of other manufacturers. Manufacturing of a dummy for monitoring the temperature difference inside sleeping bags and outerwear from natural fur of fur animals, deer and horses.
Подобные документы
Combined heating - a modern way of organizing the heat supply of the house. Use of independent sources of thermal energy. The advantages of using solar collectors. The principle of operation of the stove, fireplace insert. Types of combination boilers.
доклад, добавлен 14.03.2019The main objective is the operation of heating systems heat supply residential, public and industrial buildings and structures in order to provide municipal needs (heating, ventilation and hot water supply). Checking calculation of heat supply systems.
статья, добавлен 10.03.2019Creation of a 3D model of the design scheme of the water heating and cavitation device and simulation in Hysys software. The main relationships between temperature, pressure and flow rate of the cavitation generator of the pulse hydrocycle unit.
статья, добавлен 10.12.2024Consideration an alternative, in relation to the widely used "differential" one, "integrated" approach to solving the dynamics problems. Determining the natural frequencies of fluctuations case of the free surface liquid in containers of various shapes.
статья, добавлен 29.11.2016Improving matching techniques constructional and technological parameters of the installation with the modes of its work taking into account the features of the resonator. The changes in the dielectric parameters of raw material during the heat treatment.
автореферат, добавлен 30.04.2018This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes
статья, добавлен 20.09.2022Integrating lignin with synthetic plastics - an innovative approach in the development of sustainable polymers. Nanofibers with antimicrobial properties - one of the innovative materials that can be effectively used in the current pandemic situation.
статья, добавлен 13.04.2022Damage assessment of components of automobile and aircraft internal combustion engines, made of gamma titanium aluminides. Recommendations to prevent the negative influence of high temperatures in multilayer thin films on gamma titanium aluminides.
статья, добавлен 14.07.20163D printing (Additive Manufacturing Process, AM) is any of various processes used to make a three-dimensional object without the use of dies, molds or machining. The most basic, differentiating principle behind 3D printing. General principle modeling.
статья, добавлен 20.02.2019- 85. The Impact Analysis of Breakthrough Technologies on the Development of Russian Oil and Gas Companies
Studying the process of developing and disseminating disruptive technologies. Additive manufacturing or 3D printing. Artificial intelligence and virtual reality. A glimpse into the future of science, technology and business - 35-year perspective.
дипломная работа, добавлен 11.09.2020 Proposal and implementation of a new methodology for calculating the bending finned tubes for heat exchange systems. Getting high-quality bends with minimum radius of bending pipes bimetallic and monometallic. The use of technology in the helical rolling.
статья, добавлен 24.02.2016The concept and functional characteristics of diamond-like films of amorphous carbon with a high concentration of carbon with SP3. The peculiarities of their practical use. Diagram of the coating, its physical and chemical properties, the benefits.
статья, добавлен 12.06.2015Analysis of the selective adsorbent. Influence of modifying pentasyl group synthetic zeolites (Silicalite-1 and Silicalite-2) with metal cations capable to specific interactions on the separation ability of the chromatographic column has been studied.
статья, добавлен 02.04.2014- 89. Development of wide bandgap one-dimensional MOF/TIO2 photonic crystal and its gas-sensing properties
Metal-organic framework materials a type of coordination polymer that have seen breakthroughs in material science over the past decade. Because of their high specific surface area and porosity, they are used for gas adsorption, storage, and separation.
статья, добавлен 10.10.2024 Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".
статья, добавлен 06.05.2018The manufacturing industry may be a key sector for the application of this technology, reduce the use of conventional energy sources, especially in the food industry located in the Andean region. Ecuadorian policies and regulations on renewable energy.
статья, добавлен 23.07.2021Application and classification of construction materials. Definition of key indicators affecting the choice of material. Alloys based on copper and aluminum. Properties, applications and benefits of innovative materials, thermosetting plastics, ceramics.
статья, добавлен 10.03.2019The importance of packaging in the production and sale of cheese. Ways to extend the shelf life without loss of useful properties of the product. History and vacuum packaging function. Nanocomposites in modern packaging. Utilization of the container.
реферат, добавлен 04.03.2016The method of reducing costs and increasing the strength of threaded joints, which are currently used in every field of human activity. Experimental research on the relation between thermal treatment and strength of adhesively sealed joints was con
статья, добавлен 28.09.2016NbN and Nb-Si-N films were deposited by magnetron sputtering the Nb and Si targets on silicon wafers at various bias voltage. The films were annealed to establish their stability. The films were nanostructured represented an aggregation of crystallites.
статья, добавлен 30.07.2016Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.
презентация, добавлен 20.10.2014Characterization of elastic properties of saturated hydrocarbons and associates resinous-asfaltenovyh of compounds by simulating molecular dynamics. Evaluation of rheological behavior of heavy oil the elasticity matrix of transversely isotropic material.
статья, добавлен 27.07.2016The use of metallic pigments with features of the geometry of the surface of printing materials. Functionality of the "Materials Editor" program and a group of parameters of geometric surface structures. Assessment of surface structures in the 3D system.
статья, добавлен 12.06.2023Investigation of multilayer coatings with different bilayer periods 8-100 nm. Using of very thin layers in multilayered system leads to increasing of specific density of interphase boundaries and it leads to increasing of critical loading of destruction.
статья, добавлен 30.07.2016Determination of the design principles of shaping in the design of fur garments that provide innovative character of the design activities and high level of artistic and stylistic properties of the projected objects. Principles of composition for design.
статья, добавлен 31.05.2022