Preparation of dry construction mixtures based on local raw material and industrial wastes for production of artificial facing plates
Technology of iron-concrete products. Optimization of experiment in chemistry and chemical technology. Blocks from rocks for facing, architectural-construction, memorial and other products. Methods of determining water absorption and frost resistance.
Подобные документы
The purpose of research was isolation and identification of Enterococcus species from raw milk and traditional dairy products and their biochemical properties were examined. Some biochemical and technological properties of the strains were determined.
статья, добавлен 28.05.2022Development of methods for heat engineering tests of hydrodynamic pumps. Processes which occur in activator with water thermal hydrodynamic pump. Water flow speeds in a system. Gas bubbles are the product of centrifugal force effecting on carrier flow.
статья, добавлен 01.08.2016The influence of the addition of soy flour processed by ultrafine grinding and irradiation on the quality of crispy baked goods. The wet soybean grounds were dried and ground in an ultra-fine grinding machine. Also set the ratio of beans to water.
статья, добавлен 02.06.2022Features of the application of methods for monitoring the state of the wooden structure in the production flow. Ways to optimize the prediction of wood properties using various NDE methods. The combination of methods for effective quality control of wood.
статья, добавлен 29.11.2018Peculiarities of application of mathematical apparatus for the calculation of point Baluba-Naidysh to develop the technology for scanning of the light openings of different configurations. Method of determining point equations for parabolic window.
статья, добавлен 07.12.2016Grinding of loose materials in order to increase the contact surface, improving rheological activity for the intensification of a number of chemical and physical. Select the most efficient and economically viable method of grinding a hard material.
статья, добавлен 14.03.2019Consideration the influence of scandium on mechanical properties and heat-resistance of magnesium alloy ML10. Macrostructure of ML10 alloy with different scandium content. Sizes of microconstituents of heat-treated alloy with different scandium content.
статья, добавлен 30.01.2016Review of works on the creation and study of environmentally friendly nanostructured polymer composites. Technology of production and application of nanocellulose. Development of new environmentally friendly hydrophobic polymer composites, their scope.
статья, добавлен 29.07.2017Information about the general state of technologies for the utilization of secondary energy resources and environmental resources. The essence of phase transitions in food production technologies. The possibility of creating energy-material circuits.
статья, добавлен 10.06.2022The main objective is the operation of heating systems heat supply residential, public and industrial buildings and structures in order to provide municipal needs (heating, ventilation and hot water supply). Checking calculation of heat supply systems.
статья, добавлен 10.03.2019Obtaining complex fertilizers by oxidation of Angren brown coal with a mixture of nitric and sulfuric acids and decomposition of oxidation products with a mineralized mass and slime phosphorite of the Central Kyzyl Kum. Fertilizers' commercial properties.
статья, добавлен 27.01.2021Extraction of lithium using highly selective inorganic ion exchangers. Composite matrix-isolated flocculants-coagulants. Matrix isolation method is one of the directions of nanotechnology. The technology of application functional nanocomposite materials.
статья, добавлен 31.10.2017The model of the disperse material behavior under vibration in the hole of the dispenser based on the Navier-Stokes equations. The influence of the power factor on the movement of the product and the parameters of the hole on the vibrating dosing process.
статья, добавлен 14.09.2016Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.
статья, добавлен 30.07.2016- 90. Effect of functional fiber on viability of lactic acid bacteria and bifidobacteria during storage
The influence of gum arabic and oligofructose on the growth and viability of starter cultures of lactic acid bacteria and bifidobacteria used for the production of dairy products. Stimulation of growth of probiotic cultures in the presence of gum arabic.
статья, добавлен 25.12.2016 Adding ginger extract to the technology of table margarine production. Expanding the margarine market range and extending its shelf life. The effect of adding an additive on an organoleptic characteristics of margarine, giving it a spicy taste and aroma.
статья, добавлен 14.12.2024The analysis of the cement production process in Ghana, which is limited to grinding clinker into cement and its packaging and distribution. The equipment of grinding chains, the best configuration. Control methods used for cement grinding chains.
статья, добавлен 30.05.2018Some Nano fertilizers used nowadays globally, green synthesis of nanoparticles. Research on the application of nanotechnology in crop production. Characteristics of methods of exposure to pathogenic microorganisms. Background of Nanotechnology in systems.
статья, добавлен 18.03.2021Familiarization with layout of placement of guard signaling complex systems. Research technology of modeling discrete continuous stochastic systems. Characteristics of the main methods ensuring probability of successful fulfilment of seismic sensor.
статья, добавлен 30.01.2016The containment reservoir is where water accumulates during the flood season, one of the facilities that are absolutely essential for the proper functioning of every city. Use of this type of site as an open public space, regardless of water filling.
статья, добавлен 20.09.2021Methods of optimization and control of asynchronous electric drives of pumping machine. Application of asynchronous electric drives in industry due to their efficiency, reliability and control flexibility. Vector speed control and pulse-width modulation.
статья, добавлен 10.12.2024Analysis of finite element methods, numerical methods for solving engineering and mathematical physics. Obtaining analytical solutions for problems of complex geometry, loads and material properties. Tension rods, beams and other simple structures.
презентация, добавлен 20.10.2014- 98. Global Research on Artificial Intelligence from 1990–2014: Spatially-Explicit Bibliometric Analysis
The evaluation of artificial intelligence research from 1990–2014 by using bibliometric analysis. Growth trend of articles in artificial intelligence from. Temporal pattern of frequently used keywords. International Productivity and Collaboration.
статья, добавлен 02.02.2017 A method of determining the effective longitudinal elastic modulus for the composite material in the problem of longitudinal tensile composite. Unidirectional composite material with a hexagonal arrangement of fibers. The effective elastic modulus.
статья, добавлен 27.09.2016Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".
статья, добавлен 06.05.2018