Kinematic analysis of centrifugal and aerodynamic mechanisms of blades turning and folding of horizontal-axis wind turbines
The types of mechanisms turning and folding blades used for power control and stabilization of frequency of rotation of the wind turbines. The dependence of the displacements of sliders and centrifugal weights on the angle of rotation of the blade.
Подобные документы
The development of the modern world directly depends on the development of transport infrastructure. One of the types of transportation is pipeline systems, designed mainly for the delivery of liquid from one region to another (water pipelines).
статья, добавлен 14.02.2025The same time in the Republic of Azerbaijan, the processes of complex processing of oil-plant hydrocarbon gases and the oxidation and conversion of these gases with the participation of heterogeneous catalysts of various types have been relevant.
статья, добавлен 14.02.2025Studies of Heat and Mass of drying in the process for the production of slag gravel. Determination of the temperature of the thermal agent at the height of the layer of materials. The dependence of the velocity of the mass transfer of temperature zones.
статья, добавлен 24.02.2016Development of a diagram and installation of a prototype of a two-flow heat pipe with the ability to regulate the parameters of the working environment. Using of the method of pulsed supply of liquid coolant to increase the heat transfer of a heat pipe.
статья, добавлен 14.12.2024Development of a managed system architecture with the possibility of full-scale parametric optimization. Systematization of the architecture of the conversion system by the example of the technological process of liquid heating. Software designer EFFLI.
статья, добавлен 30.10.2016The system of rest is energy-saving, with power supply from alternative energy sources intended for complex recovery of an organism in house conditions. Determine the effectiveness of panel modules on the level of stress. Application panel "Ananta 2016".
статья, добавлен 19.12.2017A new concept of Artificial Neural Networks in estimating speed and controlling a separately excited DC motor. A three-layer feed forward neural network with sigmoid activation functions in the input and hidden layers and purelin in the output layer.
статья, добавлен 22.08.2017The model is based on a regional convolutional neural network architecture that can identify and classify different types of damage, including those caused by natural disasters, accidents, or deliberate warfare attacks, such as shelling and bombardment.
статья, добавлен 12.12.2024The base of constructing computer model of the analysis of complex physical-chemical phenomena in the process ORIEN in continuous arc furnace is as the main aggregate of energy-metallurgical complex. A mathematical model of physical-chemical processes.
статья, добавлен 02.11.2018An unfavorable combination of various factors leads to the occurrence of landslides, as catastrophic manifestations of processes in rock massifs. As a result, there is a threat to human life, damage and destruction of residential and industrial buildings.
статья, добавлен 16.06.2024The model is based on a regional convolutional neural network architecture that can identify and classify different types of damage, including those caused by natural disasters, accidents, or deliberate warfare attacks, such as shelling and bombardment.
статья, добавлен 12.12.2024Rheology of high-viscosity marine fuel, temperature conditions of fuel preparation in ship power plant. The relationship between objects, environment and fuel quality of the fuel spray. Influence of variable electric fields for high-viscosity marine fuel.
статья, добавлен 28.09.2016Combined heating - a modern way of organizing the heat supply of the house. Use of independent sources of thermal energy. The advantages of using solar collectors. The principle of operation of the stove, fireplace insert. Types of combination boilers.
доклад, добавлен 14.03.2019Aspects of the use of different types of alternative fuels that will ensure economic stability and reduce the harmful effects on the environment. Use in alternative fuel vehicles and advanced technology vehicles. Using batteries and electric motors.
статья, добавлен 03.09.2024One of the largest problems in the sugar and alcohol industry is the presence of unwanted bacteria, which leads to a decrease in alcohol production. Way to control these undesirable bacteria using silver biogenic nanoparticles synthesized from hops
статья, добавлен 08.04.2022Types of Electric Vehicle in use Today. Alternative and Novel Energy Sources and Stores. Electric Machines and their Controllers. Motor Cooling, Efficiency and Mass. Design of Ancillary Systems. Battery powered cars and vans. Torque speed characteristics.
книга, добавлен 25.11.2013Tissue Paper and its properties. Space and weight characteristics. Carrier and type of aircraft for transportation. Limitations by sizes, weight and loading on the floor. Calculation of number of bags that we can put into one box. Manipulation signs.
курсовая работа, добавлен 16.12.2013The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022Reduce costs and increase durability of threaded connections. The relationship between the thermal treatment and the strength of the threaded connection. Compare the minimum tightening hermetic threaded connections three types of anaerobic adhesives.
статья, добавлен 28.09.2016The main stages of the automatic assembly of cylinder connection. The structural elements of the flexible automated production. Prospect for the automation of machine building production. The main types of heat exchange in technological systems.
контрольная работа, добавлен 05.04.2016Class of application of heat pumps in industry. Review of the carbon dioxide heat pump in the transcritical cycle of operation according to the expander-ejector scheme. Development of methods for selecting control valves for a given heat pump circuit.
статья, добавлен 02.02.2019History of the appearance of ceramics. Ceramic products, types of ceramics. Features of technology of production of ceramic products. Ceramics of the Urals. The Perm State Arts Gallery is big Museums in the Ural region. Changes to the "Willow Pattern".
реферат, добавлен 20.03.2015Estimation of energy release in mills of various types to understand the thermodynamic aspect of processes during mechanoactivation treatment. Modeling the motion of the balls of a mill and evaluating the generation of energy in the ball system.
статья, добавлен 07.08.2020Types of tool materials: from high-carbon steel to ceramics and diamonds, and their use as cutting tools in the modern metal industry. Cutting tool and its characteristics: hardness, strength. Achieving an acceptable tool life before replacing it.
статья, добавлен 26.04.2019There exists a wide range and a considerable potential of alternative gas fuel types. Uncertainty, flexibility of nonconventional fuels’ composition seriously limits the possible exploitation of these energy sources. Equations of chemical thermodynamics.
статья, добавлен 30.07.2016