Comparative studies on physico-chemical properties of indium sulfide films deposited under different deposition conditions by chemical bath deposition
Analysis of the effect of deposition parameters on the crystal structure, surface morphology and compositional properties of an indium sulfide films. The use of electron microscopy to study the orientation of grains. Investigation of optical absorption.
Подобные документы
Study the effects of man-made nano-additive on basic physical and mechanical properties of foamed glass. Use tare and flat glass as the main raw material. Investigation the effect of nano-additive on structural features of the resulting foam glass.
статья, добавлен 30.07.2016The study of magnetron sputtered coatings on base AlN-TiB2(TiSi2). The structural composition, morphology coated materials. Features amorphous-like coatings AlN-TiB2(TiSi2) after annealing and their impact on physical and mechanical properties changes.
статья, добавлен 30.07.2016The study of methods of improving mechanical properties of coatings of implants by reducing the value of young's modulus and coefficient of friction in the fluids of the body to improve the tribological parameters of the implants with ceramic coatings.
статья, добавлен 29.01.2016Identification of the distance of the shot and other circumstances in the case of a gunshot injury are among the key issues facing the forensic medical expert and of greatest interest to law enforcement agencies. The use of laboratoryinstrumental methods.
статья, добавлен 27.12.2023Сущность технологии и техническая характеристика 3D принтера. Основные виды и преимущества 3D-печати. Краткое описание видов печати послойного напраления (Fusing Deposition Modeling) и послойного склеивания пленок (Laminated Object Manufacturing).
контрольная работа, добавлен 18.01.2017Comparison of the results of processing arrays light absorption alternate method of incorporating calibration surface with other methods. Determination of Ni2 +, Co3 +, Fe2 +, Cu2 + from 1-(2-pyridylazo)-2-naphthol in aqueous-micellar environment.
статья, добавлен 23.02.2016- 32. Chemical modification of aminopolysaccharide from shrimp shell by direct connection with polyaniline
Modification of aminopolysaccharide by deacetylation of chitin from the shrimp shell using the enzyme as a biocatalyst and microwave energy. The influence of temperature and reaction time, the ratio of aminopolysaccharide to aniline on its properties.
статья, добавлен 10.08.2020 Impact indicators coal shiites in the properties of the resulting coke. Coking process with the help of passive experiment. Effect of changes in the number of components of the coal charge on the quality of the coke at various technologies of sintering.
статья, добавлен 29.07.2016The surfactants have been objects of studies all over the world. Development of approach to surfactants with controllable structure and properties based on the natural raw materials applicable for cosmetics production as dispersed systems stabilizers.
статья, добавлен 23.09.2016- 35. The influence of modified methyl cellulose on the main properties of expanding cementing slurries
The effect of modified methylcellulose on the main properties of expanding cementing slurries. When cementing low-temperature wells, expanding cementing slurries based on a mixture of Portland cement (70-75% PCT-I) and gypsum alumina cement (30-25% GAC).
статья, добавлен 04.09.2024 Research microstructure Rodent dental alloy based on Ni-Cr-Mo after casting in a vacuum furnace. Chemical analysis of crystallographic orientation and topography. Bold molybdenum carbides, eutectic-P and particles of aluminum oxide within dendrites.
статья, добавлен 23.02.2016Studies on the preparation of pasty high-filled compositions and evaluation of their rheological properties using a rotational visco-meter "Reotest-2" on the cone-plane system. Evaluation of sedimentation resistance of compositions and their flow.
статья, добавлен 30.10.2016Damage assessment of components of automobile and aircraft internal combustion engines, made of gamma titanium aluminides. Recommendations to prevent the negative influence of high temperatures in multilayer thin films on gamma titanium aluminides.
статья, добавлен 14.07.2016Research of influence of the electric discharge machining on change the properties of water. The formation of free radicals and hydrogen peroxide under the influence of cavitation is established, which leads to an increase in the whiteness of the wool.
статья, добавлен 21.12.2016- 40. The influence mechanism of ferrite grain size on strength stress at the fatigue of low-carbon steel
The study of the properties of low carbon steel. Methods of cold plastic deformation. The rationale for the recommended annealing temperature. Is the microstructure of low-carbon metal. The study of the conditions of plastic deformation of ferrite.
статья, добавлен 29.01.2016 Synthesis of a batch of aluminum-doped titanium dioxide and testing the reaction of photocatalytic degradation of phenol in an aqueous suspension. Studies of the crystal structure of rutile anatase using XRD, XPS, Raman spectroscopy and EMF methods.
статья, добавлен 25.08.2017Features of defining the basic principles of the formation of the "unisex" style direction as a design practice in clothing design. Analysis of ways to identify the design and artistic compositional properties of the development of a costume collection.
статья, добавлен 25.04.2022Physical and chemical research methods of mechanically hydrated cement binder with organo-mineral additive - silica fume. Study the effect of additives on the kinetics of the formation of calcium silicate core lowly. Role the microsilica as a binder fume.
статья, добавлен 24.02.2016Analyzed the impact of long-term operation of gas pipelines, as well as natural stress concentrators on the physico-mechanical properties of welded joints of steel 17G1S. Regularities of the destruction of the material of welded joints of gas pipelines.
статья, добавлен 30.01.2016Analysis of design features and parameters of automobile and aircraft engines is carried out. It is shown that car engines, despite the high technical level achieved at the beginning of the 21st century, do not technically meet aviation requirements.
статья, добавлен 19.06.2022Determination of torque on the shaft of auger intensifier, power consumption, energy intensity and productivity of the backfilling workflow. Evaluation of soil properties, geometric parameters of the screw intensifier and speed of the bulldozer.
статья, добавлен 01.12.2017The purpose of research was isolation and identification of Enterococcus species from raw milk and traditional dairy products and their biochemical properties were examined. Some biochemical and technological properties of the strains were determined.
статья, добавлен 28.05.2022Test the tribological properties of lubricants as the main stage of assessing their suitability for use in friction. The scheme of the "cone - three ball" with the use of objects of simple geometric shapes to test different construction materials.
статья, добавлен 29.01.2016Environmental problems in the process of industrial chemical production. Description of ways of processing and recycling of industrial organochlorine waste in the production of dichloroethane and vinyl chloride with the return: recycling of raw materials.
статья, добавлен 07.12.2016The study of the influence of the surface hardness of the auger on its wear during dehydration of solid waste in the garbage truck. Usage of the method of regression analysis, the logarithmic dependencies of auger wear depending on the hardness.
статья, добавлен 23.06.2022