Creep - the plastic deformation of a material
Creep and fatigue in polymer matrix composites. Stages, characteristics and deformation of creep. Mechanisms of creep. General creep equation. Dislocation, nabarro-herring, coble creep. Creep of polymers, of concrete. The molecular weight of the polymer.
Подобные документы
General characteristics of the hydrostatic spindle for ultraprecision double-sided machining. Familiarity with the main features and problems of modern engineering development. Consideration of ways to ensure quality indicators of machining parts.
статья, добавлен 20.07.2020The relation between the particles velocity and the deposition efficiency of material powders. A different approaches for calculating the critical deposition velocity. Computational fluid dynamics model. Critical particle velocity determination.
статья, добавлен 29.11.2016Grinding of loose materials in order to increase the contact surface, improving rheological activity for the intensification of a number of chemical and physical. Select the most efficient and economically viable method of grinding a hard material.
статья, добавлен 14.03.2019Общая характеристика линейки паровых турбин для парогазовых установок от предприятия General Electric Power Systems, предназначенных для работе на паре, получаемом в одном или нескольких котлах-утилизаторах за счет теплоты отработавших газов ГТУ.
статья, добавлен 28.05.2018Increase in the use of hard, high strength and temperature resistant materials in engineering necessitated the development of machining techniques. Abrasive flow machining as process non-conventional machining processes. Magneto abrasive flow machining.
статья, добавлен 02.06.2014The electric drive of Crane mechanisms. The powered motor speed control via frequency converter and process control via programmable logic controller. Cranes are an important part of many industries and construction sites used for lifting heavy loads.
статья, добавлен 14.02.2025The types of mechanisms turning and folding blades used for power control and stabilization of frequency of rotation of the wind turbines. The dependence of the displacements of sliders and centrifugal weights on the angle of rotation of the blade.
статья, добавлен 14.09.2016Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.
статья, добавлен 29.01.2016Polytetrafluoroethylene as one of the promising polymers for tribotechnical purposes. The use of polysulfonamide fiber to increase the wear resistance of polytetrafluoroethylene under conditions of friction without lubrication in reciprocating motion.
статья, добавлен 11.08.2021Characteristics of jet fuels: general information and properties. Fractional composition: initial boiling point and 10% fuel distillation temperature, 50% fuel distillation temperature and temperature of 90 % fuel distillation (t90) and dry point.
контрольная работа, добавлен 06.12.2014Thermosetting plastics, their irreversible chemical reaction (polymerization), including the effects of temperature and time. Bringing the resin composition to a liquid state, forcing the liquid to flow into the cavity of the desired configuration.
статья, добавлен 10.03.2019Model for calculation of nominal stresses in characteristic points of the surface fatigue crack to the tubular shaft in bending with rotation. Reasons for the decrease of the propagation velocity of cracks in the center and changing the geometry.
статья, добавлен 28.09.2016Analysis of the aspects of the specifications and drawings of plastics that are specific to this family of materials and processes and that are related to the realities that need to be taken into account. Cavity identification and rough indication.
статья, добавлен 10.03.2019Aniline and its polymerization on cotton fabric to produce conductive cotton by chemical polymerization. Polyaniline is one of the electrically conductive polymers. Polymerization using several concentrations of aniline (ANI) and hydrochloric acid.
статья, добавлен 15.01.2021- 65. Влияние температурных напряжений на накопление контактно-усталостных повреждений в колесе локомотива
Предложена методика учета влияния температурных напряжений, возникающих в колесах железнодорожного состава при колодочном торможении, на накопление контактно-усталостных повреждений в них. Методика программно реализована в модуле Rolling Contact Fatigue.
статья, добавлен 27.05.2018 - 66. Polyphenol composition and technological characteristics of the coloured whey from various origin
The purpose of this scientific work was to determine the polyphenolic composition and technological characteristics of colored whey of various origins, obtained by coagulation of milk proteins with traditional berry raw materials and wild herbs.
статья, добавлен 10.06.2022 A lightweight, environmentally friendly nanocomposite based on thermoplastic potato starch plasticized with glycerin is described. Adding cellulose nanofibers, improving the barrier properties of films due to the tortuous path for penetrating molecules.
статья, добавлен 14.04.2022- 68. Стенды для виброконтроля. Современные балансировочные стенды с технологией балансировки Smart Weight
Ознакомление с представителем зарубежного производства фирмы "Hunter Engineering Company", стенд для виброконтроля "GSP9600QM". Особенности его конструкции и комплектация. Технические характеристики и назначение. Охрана труда во время аварийной ситуации.
контрольная работа, добавлен 18.03.2014 Осуществление управление событиями фильма в интерактивных кинотеатрах 6D. Создание кинетического экрана для павильона Hyundai Motor Group на выставке Yeosu EXPO в Корее Hyper-Matrix. Демонстрация первого фильма, использующего технологию Screen X.
презентация, добавлен 17.11.2014Assessing the development of the global economy and aerospace industry. Finding ways to reduce environmental pollution, energy consumption and flight costs. Increasing the thrust-to-weight ratio, safety and reliability of modern aircraft engines.
статья, добавлен 20.07.2024The methods of defrosting frozen berries affect sensory characteristics and the indicator of cell juice loss of the resulting product. This method preserved the tissue strength of the berry surface completely, resulting in null loss of cell juice.
статья, добавлен 14.02.2025Analysis of the artistic and compositional characteristics of Ukrainian traditional embroidery and other works of decorative and applied art for decorating current clothing models in ethnostylistics. Designing author's models of modern clothing.
статья, добавлен 05.04.2023The optimization procedure in computer-aided design problem. The methodic of optimal weight coefficients values choice. The use of structural models in the form of tables and morphological trees of quality variants of the signs of aerial vehicles.
статья, добавлен 14.09.2016Research of the valuable properties of individual components of serum, which lead to its use during the production of food products. Purification of milk whey from milk fat by separation. Separation of colloidal and ion-molecular systems of serum.
статья, добавлен 24.06.2024The processes of generating large-dimension permutation matrices and their matrix powers, including in their new spaces, along with their features and advantages for modeling a protocol for the agreement of a main cooperative secret key-permutation.
статья, добавлен 11.12.2024